Sharif Digital Repository

Electrodeposition of the Co-Ni/Cu multilayer films was carried out in sulfate solution. Cyclic voltammetry and current transient techniques were utilized to characterize the multilayer system and to obtain the nucleation and growth mechanism. The cyclic voltammograms clearly showed that electrodeposition of cobalt-nickel alloy layer was controlled by a kinetic process, where copper ions were reduced under diffusion-controlled mechanism. In addition, the current transients revealed that nucleation mechanism was instantaneous with a typical three-dimensional growth process. The microstructure of the Co-Ni/Cu films was also changed with overpotential. In this system, the growth of multilayer... 

In steel tub girder bridges, end diaphragms transmit vertical and lateral loads to the substructure. Vulnerable response of steel diaphragms in recent strong ground motions has encouraged the researchers to work on their application as seismic force reducing devices for design and retrofitting of bridges. This study is an attempt to achieve a ductile diaphragm behavior under seismic actions by using existing internal end plate diaphragm of steel tub girder bridges. Considerable elastic stiffness and dominant shear behavior of the end diaphragm has made it a suitable choice for such behavior under seismic actions. Nonlinear quasi-static analyses using nineteen different finite element models... 

Composite steel tub girders are proven to be an economical choice for long span bridges. However, detailed analysis of such superstructures requires extensive Finite Element (FE) modeling that includes many internal and external diaphragms. This paper is an attempt to study diaphragms and interior cross frames in tub girders and present simplified FE modeling details for the tub girder superstructures under gravity and seismic loadings incorporating accurate end diaphragm and interior cross frame stiffness equations. The simplified model is applicable to design of new tub girder bridges as well as load rating, health monitoring and retrofitting of existing bridges which require more... 

For the first time, a new platform based on electrochemical growth of Au nanoparticles on aligned multi-walled carbon nanotubes (A-MWCNT) was developed for sensitive lable-free DNA detection of the TP53 gene mutation, one of the most popular genes in cancer research. Electrochemical impedance spectroscopy (EIS) was used to monitor the sequence-specific DNA hybridization events related to TP53 gene. Compared to the bare Ta or MWCNT/Ta electrodes, the synergistic interactions of vertically aligned MWCNT array and gold nanoparticles at modified electrode could improve the density of the probe DNA attachment and resulting the sensitivity of the DNA sensor greatly. Using EIS, over the extended... 

Abstract: The electrodeposition of platinum nanoparticles (PtNPs) on multiwall carbon nanotubes (MWCNTs)/fluorine-doped tin oxide glass (FTO) was investigated. Nucleation and growth mechanisms were studied via Scharifker and Hills model. Chronoamperometry results clearly show that the electrodeposition processes are diffusion-controlled and the diffusion coefficient is 1.5×10-5cm2/s. The semi-spherical particles with lamellar morphology were observed in 1M H 2SO 4, while a petal shape was discerned in 0.5M H 2SO 4. Also, dispersion, size, and uniformity of PtNPs were investigated, where the finer distribution of PtNPs with the average size less than 100 nm was obtained in 0.5M H 2SO 4... 

Aboveground storage tanks are widely used for storage of liquids. The bottom of these tanks rest on the soil and is prone to the corrosion. Due to the use of geo-membrane liner in some cases, the bottoms of these tanks can only be protected from corrosion by using distributed mesh ribbon anodes. Up to now, there is no an accurate and comprehensive calculation for current distribution in such configurations. For this reason, the spans of the ribbon anodes and conductor bars are mostly chose based on simple and handy formulas, which may not be correct and optimum enough. Therefore, in this paper, the current distribution is calculated based on a 2D model and considering coating and... 

In this study, a noble robust superhydrophobic and highly oleophobic polyurethane (PU)–SiO2 nanoparticle (NP) coating is specially designed using sol-gel process. For this purpose the effective parameters on surface tension and durability of the synthesized coating investigated and optimized. This new superhydrophobic and highly oleophobic coating exhibits good pensile hardness as high as 6H with adhesive force grade of 5B and repels water and oil with contact angles (CAs) of 159° and 140° respectively. The synthesized PU-SiO2 composite also retains an excellent amphiphobicity after a 7 days immersion in water with water and oil with CAs of 150° and 130°. Facile fabrication of PU–SiO2... 

Recent advances in CO2-based refrigeration systems have made it necessary to derive heat transfer correlations for the design of the corresponding industrial equipment. The current study focuses on the derivation of such correlation for indirect sublimation, whereby a material is sublimated on a hot surface by transferring energy to it via a conduction mechanism. We took an experimental-theoretical approach to investigate the subject in the case of constant wall temperature. An apparatus with real-time temperature and weight display was built to sublimate the dry ice blocks of different sizes, with circular and rectangular geometries. When the temperature of the hotplate was changed from −30... 

The present work describes sensing application of modified TiO 2 nanotubes having carbon-Pt nanoparticles for simultaneous detection of dopamine and uric acid. The TiO 2 nanotubes electrode was prepared using anodizing method, followed by electrodeposition of Pt nanoparticles onto the tubes. Carbon was deposited by decomposition of polyethylene glycol in a tube furnace to improve the conductivity. The C-Pt-TiO 2 nanotubes modified electrode was characterized by cyclic voltam-metry and differential pulse voltammetry methods. The modified electrode displayed high sensitivity towards the oxidation of dopamine and uric acid in a phosphate buffer solution (pH 7.00). The electro-oxidation currents... 

In this study a novel Pt/Ni nanostructure consisting of nano-bushes and nanocubes was fabricated onto TiO 2 nanotubes. The scanning electron microscopy images showed that a large amount of well-dispersed nano-architectures had uniformly covered all over the surface which made an electrode with high surface area. It was obviously seen that the nanocube structures mainly consists of Ni had been grown on top of each other while the Pt colonies represented bush-like structures. As a non-enzymatic glucose biosensor, the Pt/Ni TiO 2 nanotubes modified electrode exhibited an excellent performance. The proposed biosensor had two linear ranges for detection of glucose from 0 to 0.12 mM (correlation... 

An electro-catalysis non-enzymatic electrode is proposed based on alloyed Pt/Ni nanowire arrays (NWAs) for the detection of glucose. The Pt/Ni NWAs were prepared by pulse electrodeposition of Pt and Ni within a nano-pore polycarbonate (PC) membrane followed by a chemical etching of the membrane. The electrode structure is characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The resulting Pt/Ni NWAs electrode shows high electrocatalytic activities towards the oxidation of glucose in alkaline solution. Consequently, a sensitive amperometric detection of glucose is achieved under 0.45 V vs. SCE with a low detection limit of 1.5 μM within a wide linear... 

A nanowire arrays system consisting of an ordered configuration of Pt, Ni and Co was constructed in single-bath solution through pulse electrodeposition. This structure was evaluated as a potential amperometric non-enzymatic sensor to detect glucose in alkaline solution. We observed a strong and fast amperometric response at low applied potential of 0.4 V vs. SCE over linear ranges of 0-0.2 mM and 0.2-8 mM glucose with sensitivities of 1125 and 333 μA mM-1 cm-2, respectively. We also observed a low detection limit for glucose of 1 μM. Correlation of the electronic and geometric modifications with the electrochemical performance characteristics enhanced catalytic activity of the electrode by... 

The Co nanowire arrays were synthesized by electrodeposition in polycarbonate template (PC) with 4 μm thickness. Electron field emission properties of cobalt nanowires were studied for wires with different aspect ratios, R ranged between 10 and 60, while the diameter of wires was fixed about 50 nm. The field emission properties of the samples showed low turn on electric field (Eto) with values varying between 2.9 and 11.3 V/μm showing a minimum value for R = 20 (Eto < 3 V/μm). On the other hand, the enhancement factor shows a peak for nanowires length about 1 μm. Field emission data using the Fowler-Nordhiem theory showed nearly straight-line nature confirming cold field emission of... 

The early stages of nucleation and growth of nanostructures can control the shape and final size of the fabricated nanostructure. Therefore, the study of the nucleation and growth mechanism of nanostructures is of great importance. The purpose of this study is to investigate the nucleation and growth mechanism of nickel nanocones from a chloride-based bath containing ethylene ammonium dichloride as a crystal modifier. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronoamperometry tests were employed to investigate the nucleation and growth mechanism and also the mechanism of crystal modifier performance on the growth of nanocones. Electrochemical studies revealed... 

We have investigated hydrogen sensing properties of electrodeposited Pd clusters on macroporous silicon substrates. Porous layer was prepared by electrochemical etching of p-type silicon (100) wafer in organic electrolyte DMF (dimethylformamide) diluted by HF (%95 Vol. %). The deposition of Pd was carried out by linear voltammetry (LV) technique. This technique was taken for reduction of palladium ions in the potential range from 0.4 V to -1 V vs. SCE, at the scan rate of 20 mV s-1. Some samples were annealed at 300°C for an hour in air to study the effect of heat treatment on their gas sensitivity. Surface structural and chemical properties of the samples were characterised using Scanning... 

A simple modified TiO2 nanotubes electrode was fabricated by electrodeposition of Pd, Pt and Au nanoparticles. The TiO2 nanotubes electrode was prepared using the anodizing method, followed by modifying Pd nanoparticles onto the tubes surface, offering a uniform conductive surface for electrodeposition of Pt and Au. The performance of the modified electrode was characterized by cyclic voltammetry and differential pulse voltammetry methods. The Au/Pt/Pd/TiO2 NTs modified electrode represented a high sensitivity towards individual detection of dopamine as well as simultaneous detection of dopamine and uric acid using 0.1 M phosphate buffer solution (pH 7.00) as the base solution. In both case,... 

The catalytic activity of Pt/Ni/TiO 2 nanotubes electrode toward glucose has been studied. Fabrication of Pt/Ni nanostructures was done in a single-bath solution through electrochemical pulse method by changing the deposition potential between -0.3 and -4 V vs. SCE, respectively. The resulting modified electrode represented high conductivity due to the effective presence of metallic components and uniform surface area caused by dispersion of Pt and Ni nanostructures. The scanning electron microscopy images also confirmed that a large amount of metals colonies were well-dispersed at the edge of the TiO 2 nanotubes. In addition, the Pt/Ni TiO 2 nanotubes modified electrode exhibited an... 

The separation of water-oil mixtures has attracted widespread attention because of the increasing amounts of oily wastewater produced from the daily activities of humans and different industrial processes. Therefore, the development of facile and efficient oil-water separation technologies is imperative. In this work, a new highly superhydrophilic-superoleophobic coated stainless steel mesh was fabricated using virtue of the surface modification of poly (BzVimBr-Vim)@PFOA@SiO2 nanoparticles (NPs) through a facile preparation process. The new fabricated superhydrophilic and highly oleophobic coating exhibits good adhesive properties. The oil contact angle (OCA) and water contact angle (WCA)... 

The design and development of efficient approaches for water–oil separation have had widespread interest. Most previously introduced techniques and materials used for development of the successful separation of oily wastewater could not answer all the desired demands, such as being efficient and environmentally and economically friendly. Therefore, in seeking a novel method capable of answering these expectations, surfaces with special wettability were introduced. A novel, reusable, and recyclable superhydrophilic and superoleophobic poly(Vsim-Vim)@PFOA@SiO2 nanocomposite-coated stainless steel mesh was synthesized through a facile preparation process. Since the most important factors of... 

The design and development of efficient approaches for water–oil separation have had widespread interest. Most previously introduced techniques and materials used for development of the successful separation of oily wastewater could not answer all the desired demands, such as being efficient and environmentally and economically friendly. Therefore, in seeking a novel method capable of answering these expectations, surfaces with special wettability were introduced. A novel, reusable, and recyclable superhydrophilic and superoleophobic poly(Vsim-Vim)@PFOA@SiO2 nanocomposite-coated stainless steel mesh was synthesized through a facile preparation process. Since the most important factors of...