Loading...
Search for: dolati--setareh
0.097 seconds

    Sensitivity-based generators redispatch to improve electromechanical mode damping considering transmission lines resistance

    , Article 27th Iranian Conference on Electrical Engineering, ICEE 2019, 30 April 2019 through 2 May 2019 ; 2019 , Pages 491-496 ; 9781728115085 (ISBN) Setareh, M ; Parniani, M ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2019
    Abstract
    This paper proposes a novel formula to calculate sensitivities of electromechanical modes to generators active power changes. Quadratic eigenvalue problem is applied to construct the framework of the proposed formula. Sensitivity factors are calculated using power system model parameters and power flow variables, which can be either obtained via state estimation or measured directly by phasor measurement units. The 39-bus New England power system is used to verify performance of the proposed method  

    Sensitivity-based optimal remedial actions to damp oscillatory modes considering security constraints

    , Article International Journal of Electrical Power and Energy Systems ; Volume 135 , 2022 ; 01420615 (ISSN) Setareh, M ; Parniani, M ; Sharif University of Technology
    Elsevier Ltd  2022
    Abstract
    This paper proposes a comprehensive analytic method for applying various optimal remedial actions to improve critical electromechanical modes damping without jeopardizing damping of non-critical modes and violating security constraints of power system. Generators and reactive power sources redisptach, demand side management and the generators voltage reference tuning are remedial actions that are considered here. Dynamic equations of the flux-decay dynamic model of generators, standard dynamic models of excitation system and power system stabilizer and algebraic equations of active and reactive powers balance are formulated in the quadratic eigenvalue problem framework. With simultaneous use... 

    ON-line learning of a Persian spoken dialogue system using real training data

    , Article 10th International Conference on Information Sciences, Signal Processing and their Applications, ISSPA 2010, 10 May 2010 through 13 May 2010 ; May , 2010 , Pages 133-136 ; 9781424471676 (ISBN) Habibi, M ; Sameti, H ; Setareh, H ; Sharif University of Technology
    2010
    Abstract
    The first spoken dialogue system is developed for the Persian language is introduced. This is a ticket reservation system with Persian ASR and NLU modules. The focus of the paper is on learning the dialogue management module. In this work, real on-line training data are used during the learning process. For on-line learning, the effect of the variations of discount factor (γ) on the learning speed is investigated as the second contribution of the research. The optimal values for γ were found and the variation pattern of the action-value function (Q) in the learning process was obtained. A probabilistic policy for selecting actions is used in this work for the first time instead of greedy... 

    Ambient data-based online electromechanical mode estimation by error-feedback lattice RLS filter

    , Article IEEE Transactions on Power Systems ; 2017 ; 08858950 (ISSN) Setareh, M ; Parniani, M ; Aminifar, F ; Sharif University of Technology
    2017
    Abstract
    This paper proposes a novel error-feedback lattice recursive least-squares (EF-LRLS) filter for online estimation of power system oscillatory modes. The EF-LRLS filter is applied to ambient data provided by phasor measurement units to identify the autoregressive (AR) model parameters. This filter has a modular structure; accordingly, if the length of the filter equals N, it identifies AR(1) to AR(N) models concurrently. In the proposed method, removing very low and high frequencies and re-sampling steps are fulfilled in an online fashion. This adaptive filter has less computational complexity than standard RLS filter, making it an appropriate choice for online system identification. The... 

    Non-Stationary stabilized fast transversal RLS filter for online power system modal estimation

    , Article IEEE Transactions on Power Systems ; Volume 34, Issue 4 , 2019 , Pages 2744-2754 ; 08858950 (ISSN) Setareh, M ; Parniani, M ; Aminifar, F ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2019
    Abstract
    Online monitoring of inter-area oscillations is a vital need for secure operation of large-scale power systems. This paper aims at online estimation of inter-area modes by a novel stabilized fast transversal recursive least squares (SFTRLS) filter running on ambient power system data received from phasor measurement units. The SFTRLS filter is a fast finite-impulse response adaptive filter that is widely used in communication applications, such as noise and echo cancelation. It has the lowest computational complexity among least-squares filters and directly calculates coefficients of the parametric model selected for identifying a system under study. In the proposed method, the SFTRLS filter... 

    Ambient data-based online electromechanical mode estimation by error-feedback lattice RLS filter

    , Article IEEE Transactions on Power Systems ; Volume 33, Issue 4 , July , 2018 , Pages 3745-3756 ; 08858950 (ISSN) Setareh, M ; Parniani, M ; Aminifar, F ; Sharif University of Technology
    Institute of Electrical and Electronics Engineers Inc  2018
    Abstract
    This paper proposes a novel error-feedback lattice recursive least-squares (EF-LRLS) filter for online estimation of power system oscillatory modes. The EF-LRLS filter is applied to ambient data provided by phasor measurement units to identify the autoregressive (AR) model parameters. This filter has a modular structure; accordingly, if the length of the filter equals $N$, it identifies AR(1) to ${m{AR(}}N)$ models concurrently. In the proposed method, removing very low and high frequencies and resampling steps are fulfilled in an online fashion. This adaptive filter has less computational complexity than standard RLS filter, making it an appropriate choice for online system identification.... 

    An analytic methodology to determine generators redispatch for proactive damping of critical electromechanical oscillations

    , Article International Journal of Electrical Power and Energy Systems ; Volume 123 , 2020 Setareh, M ; Parniani, M ; Aminifar, F ; Sharif University of Technology
    Elsevier Ltd  2020
    Abstract
    This paper presents a model-based method for applying online proactive generators redispatch to improve damping of the critical electromechanical oscillations of power system. The proposed method comprises two stages: 1) monitoring modal characteristics of oscillatory modes in ambient condition, and 2) applying generators redispatch based on sensitivities of the critical mode to the generators active power changes using a new analytic method. An online identification method such as error feedback lattice recursive least square adaptive filter is applied for online estimation of the oscillatory modes. Then, whenever the damping ratio of an identified mode is less than a preset threshold, its... 

    Modeling of Water Injection into the Desuperheater of Steam Generator

    , M.Sc. Thesis Sharif University of Technology Setareh, Milad (Author) ; Saidi, Mohammad Hasan (Supervisor)
    Abstract
    One of the most important equipment in a power station is desuperheater which its operation has effect on power station performance and efficiency.It is necessary to identify and evaluate the most important factors that have effect on its performance. Using desuperheater cause that the temperature of exhausting superheat steam of boiler decreases to the desired quantity. If the temperature of superheat steam is very high, it will cause burning of superheater pipes that is very dangerous.Steam is used for two purpose of power generating and operational process. Unfortunately these applications have different requirement. In power generating for maximizing efficiency, turbine needs high... 

    Design and Analysis of an Unwearable Robot for Ankle Rehabilitation

    , M.Sc. Thesis Sharif University of Technology Setareh Kokab, Hamid Reza (Author) ; Farahmand, Farzam (Supervisor)
    Abstract
    Some of the most usual problems in rehabilitation are ankle joint disabilities which are caused by stroke or damages like ankle twist and disrupt the movement activities. So rehabilitation of this joint which has important role in daily activities like walking is of high importance.
    The aim of this research is design of an unwearable robot for rehabilitation of ankle. After the study of several different mechanisms, this robot was designed based on a 2 DOF mechanism named “Agile Eye”. Based on the mechanism and parametrical analysis, final design of this robot was drafted using optimization method. Next, the musculoskeletal model of lower limb was created in MATLAB and by using this... 

    Damping Critical Electromechanical Oscillations in Power System Through Remedial Actions Using Wide Area Measurement System (WAMS)

    , Ph.D. Dissertation Sharif University of Technology Setareh, Mohammad (Author) ; Parniani, Mostafa (Supervisor) ; Aminifar, Farrokh (Co-Supervisor)
    Abstract
    Nowadays, by proliferation the basis of the phasor-based synchronous wide area measurement system (WAMS), its application for improving electromechanical oscillations damping has been considered by researchers. In interconnected power systems, inter-area modes are usually critical modes. There are two approaches for damping these modes by utilizing WAMS: 1) the traditional approach of using power system stabilizers with wide area signals; and 2) discrete corrective actions by changing the operating conditions. The first approach requires a thorough study at the design stage, installation and testing. Besides, the controller is designed for a specific operating point. Nevertheless, in the... 

    DNA impedance biosensor for detection of cancer, TP53 gene mutation, based on gold nanoparticles/aligned carbon nanotubes modified electrode

    , Article Analytica Chimica Acta ; Vol. 836, issue , July , 2014 , p. 34-44 ; ISSN: 00032670 Fayazfar, H ; Afshar, A ; Dolati, M ; Dolati, A ; Sharif University of Technology
    2014
    Abstract
    For the first time, a new platform based on electrochemical growth of Au nanoparticles on aligned multi-walled carbon nanotubes (A-MWCNT) was developed for sensitive lable-free DNA detection of the TP53 gene mutation, one of the most popular genes in cancer research. Electrochemical impedance spectroscopy (EIS) was used to monitor the sequence-specific DNA hybridization events related to TP53 gene. Compared to the bare Ta or MWCNT/Ta electrodes, the synergistic interactions of vertically aligned MWCNT array and gold nanoparticles at modified electrode could improve the density of the probe DNA attachment and resulting the sensitivity of the DNA sensor greatly. Using EIS, over the extended... 

    Ductile behavior of existing internal end diaphragms in steel tub girder bridges

    , Article Journal of Constructional Steel Research ; Volume 153 , 2019 , Pages 356-371 ; 0143974X (ISSN) Dolati, A ; Maleki, S ; Sharif University of Technology
    Elsevier Ltd  2019
    Abstract
    In steel tub girder bridges, end diaphragms transmit vertical and lateral loads to the substructure. Vulnerable response of steel diaphragms in recent strong ground motions has encouraged the researchers to work on their application as seismic force reducing devices for design and retrofitting of bridges. This study is an attempt to achieve a ductile diaphragm behavior under seismic actions by using existing internal end plate diaphragm of steel tub girder bridges. Considerable elastic stiffness and dominant shear behavior of the end diaphragm has made it a suitable choice for such behavior under seismic actions. Nonlinear quasi-static analyses using nineteen different finite element models... 

    Electrodeposition of Ni-Co/SiC Composite Coatings

    , M.Sc. Thesis Sharif University of Technology Bahadormanesh, Behrouz (Author) ; Dolati, Abolghasem (Supervisor)
    Abstract
    Ni-Co/SiC composite coatings with various contents of SiC nano particles were electrodeposited in a modified watt type of Ni-Co bath containing 20 nm SiC nano particles to be codeposited. The influences of the SiC concentration, current density, stirring rate of the deposition bath on the composition of the coatings were investigated and these parameters optimized for highest amount of SiC codeposition. The optimized deposition parameters were 40 g/l SiC and 480 rpm stirring rate and current density equal to 4 A/dm2. Ni-Co/SiC composite coating was deposited with the maximum particles content of 30.5 volume percent. Linear voltammetry demonstrates addition of the SiC to the Ni-Co deposition... 

    Cathodic Protection of Concrete by Zinc Sacrificial Anode in Persian Gulf Sea Water

    , M.Sc. Thesis Sharif University of Technology Cheraghali, Behrouz (Author) ; Dolati, Abolghasem (Supervisor)
    Abstract
    Many of the major structure over coastal waters in the Kish Island due to the aggressive condition are showing signs of reinforcement corrosion. Recent advances in the development of anodes make it practical to use zinc galvanic cathodic protection to protect this structure in this area. Five anode systems were tested on several samples as, (1) zinc metal spray applied by arc-spraying on the concrete, (2) a zinc foil with conductive adhesive backing, (3) a system of zinc mesh and grout jacket, (4) a system of zinc mesh and compression panels, and (5) a bulk zinc. These anodes are set up to comparison the effects of potential and current over the zinc galvanic cathodic protection during 4... 

    Wear-Resistant Nickel-Titanium Nitride Composite Coating by Electrochemical Method

    , M.Sc. Thesis Sharif University of Technology Parhizkar, Nafise (Author) ; Dolati, Abolghasem (Supervisor)
    Abstract
    Metal matrix nanocomposites contains ceramic ultrafine particles in a metal matrix, are used to improve the mechanical properties such as hardness and wear of coatings. For developing metal matrix nanocomposites, there are many methods. Electrochemical deposition process is one of these methods that have some advantages like uniform depositions on substrates with complex shapes, low cost, good repeatability and reducing waste. In this project, for increasing the hardness and wear resistance of nickel, composite coatings of nickel - titanium nitride was created by using electrochemical deposition of Watts bath contained titanium nitride particles. In order to increase the amount of... 

    Modification of Vertically Aligned Carbon Nanotubes with RuO2 for a Solid-State pH Sensor

    , M.Sc. Thesis Sharif University of Technology Kahram, Mohaddeseh (Author) ; Dolati, Abolghasem (Supervisor)
    Abstract
    In this work, a novel type electrode based on RuO2 nanoparticles-modified vertically aligned carbon nanotubes (RuO2/MWCNTs) was investigated. ThisRuO2/MWCNTs electrode not only shows a high capacity nature,but also possesses a good response to the pH value. In order to develope this sensor, aligned carbon nanotubes were synthesized by the chemical vapor deposition at first and then modified with RuO2 nanopartcles by sol-gel method. Various parameters affecting the growth of nanotubes, such as substrate type, surface finishing, surface roughness, the growth temperature and carbon feed rate was studiedand and optimal conditions for growth were obtained. At last, aligned nanotubes with a... 

    Electrodeposition of the Ni-P by Pulse Plating

    , M.Sc. Thesis Sharif University of Technology Kazerooni, Amir (Author) ; Dolati, Abolghasem (Supervisor)
    Abstract
    Ni-P alloy coatings were electrodeposited using pulse current in a watt type bath in various conditions. The influences of different parameters were investigated and optimized for the highest amount of coating hardness using the Design Of Experiment (DOE) method. The optimized deposition parameters were current density 23.7 A/dm2, duty cycle 75%, frequency equal to 188 Hz, temperature equal to 70ºC and 17.5 gr/l of H3PO3. The DOE prediction of hardness for the optimized coatings was between 700 and 750 the achieved micro-hardness was about 725.8 HV. It was obtained that an increase of the current density will improve micro-hardness, decreases P content and increase deposition rate. Also, the... 

    Simulation of Nickel Electrodeposition

    , M.Sc. Thesis Sharif University of Technology Zargarnezhad, Hossein (Author) ; Dolati, Abolghasem (Supervisor)
    Abstract
    In this research project, Ni electrodeposition process has been modeled by a 3D coupled continuum-kinetic Monte Carlo simulation. Kinetic Monte Carlo module processes surface reactions along the substrate using electrochemical equations for the relating events. Continuum model also determines concentration of the whole system according to a 3D interpretation of diffusion law in solutions. After running each module, exchange of data between two codes is done and boundary conditions are updated. In fact, the whole simulation time is divided by small time steps relating to time fastest reactions need to proceed. Present model will generate three outputs: current-time curve, surface morphology... 

    CNT Modified Coatings for Glucose Sensing

    , M.Sc. Thesis Sharif University of Technology Partovi, Parisa (Author) ; Dolati, Abolghasem (Supervisor)
    Abstract
    This research describes a new and relatively general method to grow well-aligned carbon nanotubes (CNTs) on cobalt-deposited stainless steel by thermal chemical vapor deposition (CVD) of ethylenediamine precursor. The CNTs are vertically aligned at high density over large areas on the surface. Different effective parameters in growth of carbon nanotubes, as type of substrate, surface treatment, temperature of growth , feeding carbon supplies have been studied. Finally, aligned carbon nanotubes have been prepared by 100-150 nm diameter and 9µ length. CoOx•nH2O–MWCNTs nanocomposites were successfully synthesized, using a cathodic electrochemical reduction of H2O2 to deposit cobalt... 

    Deposition of Indium-tin-oxide on Glass By Sol-gel and Effect of Noble Dopants on the Optical and Electerical Properties of Indium-tin-oxide Thin Films

    , M.Sc. Thesis Sharif University of Technology Mirzaee, Majid (Author) ; Dolati, Abolghasem (Supervisor)
    Abstract
    Thin film of Indium oxide doped with tin is used as a transparent electrode for different applications like screening panels, solar cells, touch panels and elechtrochromic tools. Trading thin films of ITO are precipitated using sputtering. However sol gel method can be simple and economic to make transparent electrodes. In this thesis first ITO sols is prepared using Indium nitrate and tin chloride with two or four capacities due to the production of transparent oxides on soda lime glass. Then the effect of tin chloride with two and four capacities is investigated on resistance and optic properties. Results show that tin chloride with four capacities in comparison with tin of two capacities...