Sharif Digital Repository / Sharif University of Technology / Search result

Broadband, polarization-insensitive, and wide-angle optical absorber based on fractal plasmonics

, Article IEEE Photonics Technology Letters ; Volume PP, Issue 99 , 2016 ; 10411135 (ISSN) Eshaghian Dorche, A ; Abdollahramezani, S ; Chizari, A ; Khavasi, A ; Sharif University of Technology

Institute of Electrical and Electronics Engineers Inc 2016

Abstract

In this paper, a plasmonic absorber consisting of a metal-dielectric-metal stack with a top layer of Sierpinski nanocarpet is theoretically investigated. Such a compact absorber depicts broadband angle-independent behavior over a wide optical wavelength range (400 700 nm) and a broad range of incidence angles (0 80). Including several feature sizes, such a fractal-like structure shows average simulated extinction response of 0:85 for either transverse electric or magnetic polarization states under normal incidence. Underlying mechanisms of absorbance due to excited surface plasmon modes as well as electric/magnetic dipole resonances are well revealed by investigating electric field, magnetic...

Dielectric metasurfaces solve differential and integro-differential equations

, Article Optics Letters ; Volume 42, Issue 7 , 2017 , Pages 1197-1200 ; 01469592 (ISSN) Abdollahramezani, S ; Chizari, A ; Eshaghian Dorche, A ; Jamali, M. V ; Salehi, J. A ; Sharif University of Technology

OSA - The Optical Society 2017

Abstract

Leveraging subwavelength resonant nanostructures, plasmonic metasurfaces have recently attracted much attention as a breakthrough concept for engineering optical waves both spatially and spectrally. However, inherent ohmic losses concomitant with low coupling efficiencies pose fundamental impediments over their practical applications. Not only can all-dielectric metasurfaces tackle such substantial drawbacks, but also their CMOS-compatible configurations support both Mie resonances that are invariant to the incident angle. Here, we report on a transmittive metasurface comprising arrayed silicon nanodisks embedded in a homogeneous dielectric medium to manipulate phase and amplitude of...

Strategies in Reduction of Power Leakage from Three-dimensional Plamsmonic Circuits Based on Planar Arrangement

, M.Sc. Thesis Sharif University of Technology Dorche, Ali Eshaghian (Author) ; Mehrany, Khashayar (Supervisor)

Abstract

The focus of this thesis is on reduction of power leakage from bent structures formed by three-dimensional plasmonic waveguides. Since plasmonic waveguides should meet certain conditions to be appropriate for future plasmonic integrated circuits, bunch of hitherto reported plasmonic waveguides are considered and only two of them, viz. plasmonic slot and square coaxial, are selected as suitable candidates for further studies.
Transmission efficiency of sharp bend and dead-end formed in structures based on plasmonic slot waveguides are significantly improved by introducing easy-to-fabricate defects that eliminate in- and out-of-plane power leakage. Afterward, the plasmonic square coaxial...

Transmission enhancement of sharply bent nanoplasmonic slot waveguides

, Article Journal of the Optical Society of America B: Optical Physics ; Vol. 31, issue. 3 , 2014 , pp. 458-463 ; ISSN: 07403224 Eshaghian, A ; Hodaei, H ; Bahadori, M ; Rezaei, M ; Mehrany, K ; Sharif University of Technology

2014

Abstract

The bending performance of standard nanoplasmonic slot waveguides is substantially improved by reducing the leakage loss and reflection in a systematic way. The out-of-plane power leakage is suppressed by using square metallic patches above and below the bend. The in-plane power leakage is reduced by elimination of the asymmetry between the electrical length of the inner and outer corners of the bend. The unwanted reflection is decreased by changing the shape of the outer corner of the bend. The partial reflections caused by the indentations of the modified shape destructively interfere with each other and thereby decrease the unwanted back reflection

Multi-conductor transmission line networks in analysis of side-coupled metal-insulator-metal plasmonic structures

, Article Optics Communications ; Vol. 313, issue , 2014 , pp. 375-381 ; ISSN: 00304018 Eshaghian, A ; Bahadori, M ; Rezaei, M ; Khavasi, A ; Hodaei, H ; Mehrany, K ; Sharif University of Technology

2014

Abstract

An approximate and accurate enough multi-conductor transmission line model is developed for analysis of side-coupled metal-insulator-metal (MIM) waveguides. MIM waveguides have been already modeled by single conductor transmission lines. Here, the side coupling effects that exist between neighboring plasmonic structures are taken into account by finding appropriate values for distributed mutual inductance and mutual capacitance between every two neighboring conductors in the conventional single-conductor transmission line models. In this manner, multi-conductor transmission line models are introduced. Closed-form expressions are given for the transmission and reflection of miscellaneous MIM...

Optimization of Synthesis Method and Operational Improvement of High Temperature Water-gas Shift Catalyst

, M.Sc. Thesis Sharif University of Technology Eshaghian, Razieh (Author) ; Baghghalha, Morteza (Supervisor) ; Kazemeini, Mohammad (Supervisor) ; Bahmani, Mohsen (Co-Advisor)

Abstract

The water-gas shift reaction, as a vital reaction in industry especially as a source of hydrogen for the manufacture of ammonia, is influential for all of the scientists and researchers in chemical engineering all around the world. In this research, high temperature water-gas shift (HTS) catalysts were investigated in order to study synthesis parameters and improvement of their performance and catalytic activity. The two catalyst categories; non pre-active and pre-active (magnetite-based samples, not requiring a reduction step prior to use) were prepared by co-precipitation method, using chloride, sulfate and nitrate metal (Fe, Cr, Cu) precursors and NaOH as precipitating agent (the aging...

Easy-to-Design Nano-Coupler Between Metal-Insulator-Metal Plasmonic and Dielectric Slab Waveguides

, Article Plasmonics ; Volume 8, Issue 2 , 2013 , Pages 1123-1128 ; 15571955 (ISSN) Hodaei, H ; Rezaei, M ; Miri, M ; Bahadori, M ; Eshaghian, A ; Mehrany, K ; Sharif University of Technology

2013

Abstract

An easy-to-design single-stub nano-coupler is proposed to increase the direct coupling efficiency between metal-insulator-metal (MIM) plasmonic and high-index dielectric waveguides. The modal reflection and transmission from the junction are exploited to provide a circuit description for the structure. The return loss of direct coupling is then minimized by loading the MIM waveguide with a single stub. Numerical examples are given, and the accuracy of the model is examined via finite-difference time-domain method

Technical English for mechanical engineers

, Book Alemi, Minoo ; Meghdari,Ali

Sharif University Press 2014

Abstract

Local educational institutions produce in-house English for Specific Purpose (ESP) materials according to the curriculum policies designated and developed by the Ministry of Higher Education In Iran. To this end, this book aims to be used in the Iranian setting at the tertiary level for undergraduate students majoring in Mechanical Engineering. Moreover, the style of English usage in this ESP textbook is American.
Regarding the content of the textbook, it has both thematic organizations in which the topics are relevant and includes sufficient treatment of the target language areas necessary for the students. The principle organizing approach of this textbook is theme-based. In addition,...

Feedback control of the neuro-musculoskeletal system in a forward dynamics simulation of stair locomotion [electronic resource]

, Article Proc. of IMechE Part H: Journal of Engineering in Medicine ; 2009, Vol. 223, No. 6, pp. 663-675 Journal of NeuroEngineering and Rehabilitation ; Volume 11, Issue 1, 30 April 2014, Article number 78 Selk Ghafari, A. (Ali) ; Meghdari, Ali ; Vossough, Gholam Reza ; Sharif University of Technology

Abstract

The aim of this study is to employ feedback control loops to provide a stable forward dynamics simulation of human movement under repeated position constraint conditions in the environment, particularly during stair climbing. A ten-degrees-of-freedom skeletal model containing 18 Hill-type musculotendon actuators per leg was employed to simulate the model in the sagittal plane. The postural tracking and obstacle avoidance were provided by the proportional—integral—derivative controller according to the modulation of the time rate change of the joint kinematics. The stability of the model was maintained by controlling the velocity of the body's centre of mass according to the desired centre of...

Design and Construction of a Soft Actuated Exoskeleton for Hand Rehabilitation of Stroke Patients

, M.Sc. Thesis Sharif University of Technology Razavi Zadehgan, Ali Akbar (Author) ; Ghafari, Ali (Supervisor) ; Meghdari, Ali (Supervisor)

Abstract

The main goal of this thesis is the design and development of a rehabilitation device for helping patients “to improve blood circulation” & retain and recover their abilities if possible that were lost during the stroke or a accident like that (my research in karaj/iran shows that it is possible by just movement of the specific body part). The focus is on hand in this thesis because Injuries to the hand are common and can be very debilitating since our hands are our primary means for interacting with our world. For rehabilitation in case of human hand there are several practices that should be done for patients either in home or in a rehabilitation center, time and money that is supposed to...

Silica chloride/wet SiO2 as a novel heterogeneous system for the deprotection of acetals under mild conditions [electronic resource]

, Article Phosphorus, Sulfur, and Silicon and the Related Elements ; Volume 178:2667-2670, Issue 12, 2003 Mirjalili, B. F. (BiBi Fatemeh) ; Pourjavadi, Ali ; Zolfigol, Mohammad Ali ; Bamoniri, Abdolhamid

Abstract

A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition

Earthquake Branch

, M.Sc. Thesis Sharif University of Technology Bagher Shemirani, Ali Reza (Author) ; Bakhshi, Ali (Supervisor)

Abstract

In the past few decades, shaking tables are widely used to evaluate system response of structures under seismic excitations. These devices are used without any fundamental research performed on a shaking table system as an entity model. In most of these studies for simplicity, it is assumed that there exist no considerable vibration and displacement around the shaking tables, and no attention is paid to the peripheral substances such as soil settled under the foundation.
In this thesis, result of ambient vibration test on shaking table system (solid deck, concrete foundation and soil layer) has been presented. Precise sensors known as low frequency and high accuracy accelerometers have...

Comparison between Performance of Stone Columns and RAPs from the Bearing Capacity and Settlement Reduction Viewpoints

, M.Sc. Thesis Sharif University of Technology Golestani Dariani, Ali Akbar (Author) ; Pak, Ali (Supervisor)

Abstract

Out of several ground improvement techniques available, stone columns have been widely used. This technique has been successfully applied to increase the bearing capacity and to reduce the settlement for foundation of structures like liquid storage tanks, earthen embankments, raft foundations, etc., where a relatively large settlement is permissible. This technique has, generally, been proven successful in increasing the stiffness of weak soils, upgrading their safe bearing capacity, and reducing their total and differential settlements, as well as speeding up their consolidation process. The beneficial effects of stone column installation in weak deposits is manifested in the form of...

Improvement of Stability of Haptic Force Interaction with Virtual Environments Using a Haptic Interface with a Separate Tracker

, M.Sc. Thesis Sharif University of Technology Mashayekhi, Ahmad (Author) ; Meghdari, Ali (Supervisor) ; Nahvi, Ali (Supervisor)

Abstract

In the present study, a new version of haptic devices is presented in which user’s hand is in contact with the device just while collision with virtual surface. In this system, the position of user’s finger can be traced by using a camera and the haptic device follows user’s finger at the distance of about two centimeters. While the haptic device approaches to the virtual surface, gradually reduces its speed and stops about two centimeters distant of virtual plane. Then user’s hand collides with the haptic device which is static. Greater fidelity, transparency, more stability and also no need to large actuators are of the advantages of this system. In this project, first we present a new...

Performance of Partially Filled Mini-Channels with Porous Media

, M.Sc. Thesis Sharif University of Technology Azimi, Adel (Author) ; Nouri, Ali (Supervisor) ; Moosavi, Ali (Co-Advisor)

Abstract

Laminar forced convection flow through a channel partially filled with a porous material was numerically studied in this thesis. The Navier-Stokes and Brinkman-Forchheimer equations were used to model the fluid flow in the free and porous regions, respectively. Coupling of the pressure and velocity fields was resolved using the SIMPLEC algorithm. The local thermal equilibrium was adopted in the energy equation. The effects of the thermal conductivity ratio, Darcy number, porosity, Reynolds number and height of the porous insert on velocity and temperature field were investigated. The results show that the flow behavior and its associated heat transfer are susceptible to the variation of the...

Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions [electronic resource]

, Article Journal of Chemical Research ; Volume 2002, Number 8, 1 August 2002, pp. 378-380(3) Pourjavadi, A. (Ali) ; Bagheri Marandi, Gholam

Abstract

Free Content Selective synthesis of conjugated enynes from α-arylalkynols using LiCl-Acidic Al2O3 under solvent-free conditions

Selective preparation of fluorescent 1,8-naphthalimides using acidic alumina under microwave irradiation [electronic resource]

, Article Journal of Chemical Research ; 01/2001; 2001(11):485-487 Pourjavadi, A. (Ali) ; Bagheri Marandi, Gholam

Abstract

7H-benzimidazo[2,1-a]benz[de]isoquinolin-7-one compounds were prepared in a selective manner by reaction between o-phenylenediamines and appropriate 1,8-naphthalenedicarboxylic anhydrides using acidic alumina under microwave irradiation

Simulation of the Biomolecule Imaging and Manipulation Via AFM by Molecular Dynamics Method

, M.Sc. Thesis Sharif University of Technology Kheiroddin, Mohsen (Author) ; Meghdari, Ali (Supervisor) ; Moosavi, Ali (Supervisor)

Abstract

In this thesis we try to find optimized parameters for imaging and manipulation of a biosample with AFM. For this we have prepared a numerous Molecular Dynamics simulation and find some reliable result. So, first we have focused on imaging process in Non contact mode (the less harmful mode). Then we headed into the manipulation process. The main problem about manipulating a biosample is the environment. In imaging section, the process of imaging a biomolecule by AFM is modeled using molecular dynamics simulations. Since the large normal force exerted by the tip on the biosample in contact and tapping modes may damage the sample structure and produce irreversible deformation, the non-contact...

Characterzing Variation of Small Strain Shear Modulus of Unsaturated Sand During Hydraulic Hysteresis with Bender Elements

, M.Sc. Thesis Sharif University of Technology Shahbazan, Parisa (Author) ; Pak, Ali (Supervisor) ; Khosravi, Ali (Supervisor)

Abstract

Results of previous studies on silt and clay indicated that variations in the small strain shear modulus, Gmax, during drying had a non-linear increasing trend with matric suction with greater values upon wetting. However, due to different material properties and inter-particle forces, different behaviour in Gmax is expected for sand. Although considerable research has been devoted in recent years to characterize the behaviour of Gmax of sand during drying, rather less attention has been paid to the effect of hydraulic hysteresis on Gmax and its variations during wetting. In the study presented herein, an effort was made to characterize the variation of Gmax for specimens of sand during...

Sequential Competitive Facility Location In Continuous Geometric Space

, M.Sc. Thesis Sharif University of Technology Lavasani, Ali Mohammad (Author) ; Abam, Mohammad Ali (Supervisor)

Abstract

Abstract The problem of competetive facility location can be defined as follows: There are a number of customers in the form of points in space, and two players arrange a number of facilities in the form of points in space, given some limitations, respectively. Each customer’s connection to each facility has a cost for the customer and an advantage for the facility, and each customer wants to be connected to at most one of the facilities which has the lowest cost for him. The goal is to find the strategy of placing the facilities and determining the cost which the facility receives from the customer, in such a way that the player’s profit is maximised.In this thesis, we first sought to...