Sharif Digital Repository

1-(2-Hydroxyethyl)-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ionic liquid ([hemim][NTf2]) was synthesized as a new functionalized ionic liquid to study the effect of addition of the hydroxyl group to the imidazolium cation on aliphatic/aromatic separations. For this purpose, liquid-liquid equilibrium (LLE) data for {heptane + toluene or benzene + 1-(2-hydroxyethyl)-3-methylimidazolium bis (trifluoromethylsulfonyl)imide ([hemim][NTf2])} systems were measured at 313.2 K and atmospheric pressure. The measured LLE data were correlated using three basically distinct thermodynamic models; that is, nonrandom two-liquid (NRTL), Othmer-Tobias, and Hand correlations. Results show that... 

This article proposes a novel index along with a user-friendly platform for resilience evaluation of the urban water distribution networks (WDN). WDN is of great importance in preserving the safety and sustainability of communities and cities. Resilience of a given system results in its sustainability. In recent years, many studies have focused on resilient urban WDN. However, these studies did not provide a comprehensive evaluation index and platform that could simultaneously consider hydraulic analysis, resilience parameters, and significant uncertainties. In this study, a novel resilience index was defined, and a user-friendly and practical platform (REWAT) was developed to calculate the... 

In a graph G a vertex v dominates all its neighbors and itself. A set D of vertices of G is (vertex) dominating set if each vertex of G is dominated by at least one vertex in D. The (vertex) domination number of G, denoted by γ (G), is the cardinality of a minimum dominating set of G. A set D of vertices in G is efficient dominating set if every vertex of G is dominated by exactly one vertex of D. For natural numbers n and k, where n > 2 k, a generalized Petersen graphP (n, k) is obtained by letting its vertex set be {u1, u2, ..., un} ∪ {v1, v2, ..., vn} and its edge set be the union of {ui ui + 1, ui vi, vi vi + l} over 1 ≤ i ≤ n, where subscripts are reduced modulo n. We prove a necessary... 

Regarding the increasing number of electrical devices in the smart homes that leads to increase in total electricity consumption and cost, it is essential to use energy management methods to reduce the electricity cost. However, this can cause resident's dissatisfaction. Hence, it is important to define a method in which cost and dissatisfaction be optimized simultaneously. Among different services, an electric vehicle is the one that can be used as an energy storage system, so it can reduce the daily cost despite of increasing the total energy consumption. In this paper, we study the effect of the EV on the cost and dissatisfaction in our proposed method. © 2018 IEEE  

Background: Patients who have shoulder pain usually have compensatory or contributory deviation of shoulder motion during arm elevation. In the traditional scapulohumeral rhythm, the share of the acromioclavicular (AC) and the sternoclavicular (SC) joint movements and also the role of AC internal rotation angle are unknown. Objectives: The main purpose of this study was to measure and compare the segmentary scapulohumeral rhythm (SSHR) during scapular arm elevation at a steady rotational speed in athletes with and without impingement syndrome. Patients and Methods: Using a speedometer, the maximum speed of arm elevation was measured in 21 men in each of the involved and uninvolved groups.... 

In this paper, a new linear theory for bending stress-strain analysis of a cracked beam has been developed. A displacement field has been suggested for the beam strain and stress calculations. The bending differential equation for the beam has been written using equilibrium equations. The required constant for this model is also obtained from fracture mechanics. The bending equation has been solved for a simply supported beam with rectangular cross-section and the results are compared with finite element and empirical results. There is an excellent agreement between theoretical results and those obtained by numerical and empirical methods. The model developed in this research is a simple and... 

In this paper the equation of motion and corresponding boundary conditions has been developed for forced bending vibration analysis of a beam with an open edge crack. A uniform Euler-Bernoulli beam and the Hamilton principle have been used in this research. The natural frequencies and the forced response of this beam have been obtained using the new developed model in conjunction with the Galerkin projection method. The crack has been modeled as a continuous disturbance function in displacement filed which could be obtained from fracture mechanics. The results show that the first natural frequency will reduce when the crack depth ratio increases. Also the rate of this reduction depends on... 

In this paper the equations of motion and corresponding boundary conditions for bending vibration of a beam with an open edge crack has been developed by implementing the Hamilton principle. A uniform Euler-Bernoulli beam has been used in this research. The natural frequencies of this beam have been calculated using the new developed model in conjunction with the Galerkin projection method. The crack has been modeled as a continuous disturbance function in displacement field which could be obtained from fracture mechanics. The results show that the natural frequencies of a cracked beam reduce by increasing crack depth. There is an excellent agreement between the theoretically calculated... 

In the light of the rapid advances in renewable energy technologies, they have become an appropriate option to supply energy with numerous advantages. Besides, the coordination of different energy resources and the proliferation of energy conversion technologies such as Combined Heat and Power (CHP) has facilitated the raising of new energy prosumers called Smart Energy Hub (S.E.Hub). This paper utilizes an innovative model to propose a secured decentralized energy market architecture that consists of S.E.Hubs, energy utility grids, energy consumers, and an aggregator. The interaction among these players is modeled as a bilevel optimization problem. This problem has been transformed into a... 

Several evidences support the idea that a small population of tumour cells representing self-renewal potential are involved in initiation, maintenance, metastasis, and outcomes of cancer therapy. Elucidation of microRNAs/genes regulatory networks activated in cancer stem cells (CSCs) is necessary for the identification of new targets for cancer therapy. The aim of the present study was to predict the miRNAs pattern, which can target both metastasis and self-renewal pathways using integration of literature and data mining. For this purpose, mammospheres derived from MCF-7, MDA-MB231, and MDA-MB468 were used as breast CSCs model. They had higher migration, invasion, and colony formation... 

Novel type of two-impinging-jets loop reactor (TIJLR) has been proposed and tested successfully for the solid-liquid catalytic reactions. The TIJLR was tested using the catalytic reaction of isomerization of D-glucose to D-fructose by immobilized glucose isomerase catalyst as a typical model system of solid-liquid catalytic reactions. The TIJLR is characterized by a high intensity reaction chamber, which is separated by a perforated plate from other parts of the reactor. The perforated plate was used as a filter to keep the catalyst particles within the reaction chamber. A compartment model with two adjustable parameters was considered to describe the pattern of flow within the reaction... 

Based on the quasi-adiabatic model, the parameters of the bubble interior for a moving single bubble sonoluminescence in water, adiponitrile, and N-methylformamide are calculated for various fluid viscosities. By using a complete form of the hydrodynamic force, the bubble trajectory is calculated for a moving single bubble sonoluminescence (m-SBSL). It is found that as the fluid viscosity increases, the unique circular path changes to an ellipsoidal and then linear form and along this incrementally increase of viscosity the light intensity increases. By using the Bremsstrahlung model to describe the bubble radiation, gradual increase of the viscosity results in brighter emissions. It is... 

SnO2 is an important functional material having a wide range of applications in gas sensors and optoelectronic devices. There is a great interest for finding new cost-effective and straight-forward methods for production of these particles. In this research, hydrogel thermal decomposition method (HTDM) is used for production of high purity SnO2 nano-particles. Cost effective reactants and green routs of production are the advantages of polysaccharide based hydrogel as starting material for this method. Visual observations indicated that there is very little tendency for agglomeration in the SnO2 nano-particles produced by this method which can be considered as an advantage for this method... 

A complete study of the hydrodynamic force on a moving single bubble sonoluminescence in N-methylformamide is presented in this work. All forces exerted, trajectory, interior temperature and gas pressure are discussed. The maximum values of the calculated components of the hydrodynamic force for three different radii at the same driving pressure were compared, while the optimum bubble radius was determined. The maximum value of the buoyancy force appears at the start of bubble collapse, earlier than the other forces whose maximum values appear at the moment of bubble collapse. We verified that for radii larger than the optimum radius, the temperature peak value decreases  

The mutual interaction of two oscillating gas bubbles in different concentrations of sulfuric acid is numerically investigated. A nonlinear oscillation for spherical symmetric bubbles with equilibrium radii smaller than 10 μm at a frequency of 37 kHz in a strong driving acoustical field Pa =1.8 bar is assumed. The calculations are based on the investigation of the secondary Bjerknes force with regard to adiabatic model for the bubble interior which appears as repulsion or attraction interaction force. In this work the influence of the various concentrations of sulfuric acid in uncoupled and coupled distances between bubbles has been investigated. It is found that the sign and value of the... 

A simple catalyst LiClO4/Et3N has been developed and demonstrated to efficiently catalyze Michael addition reactions of active methylene compounds to conjugated ketones, nitriles, esters and nitroalkenes with remarkably high yields and in short reaction time. The Michael addition to nitroalkenes and α,β-unsaturated ketones proceeds quantitatively in the usual way, giving the monoaddition product. © 2008 Elsevier B.V. All rights reserved  

Transient heat-up of a solid propellant rocket structure during motor burning time is studied, numerically. The solid phase energy equation coupled with unsteady compressible flow equations are used in this simulation. The flow-field equations are discretized and solved using upwind Roe's scheme. The results show that heat transfer from the gas phase boundaries has negligible effect on internal ballistics behavior. On the other hand, the results are suitable for a thermal stresses analysis in the chamber case and are consequently valuable from structural design viewpoints  

In this research, a phase-field model was developed to investigate the retrogression process in 7075 aluminum alloy sheets. The model predicts the kinetic of metastable η' phase dissolution during retrogression treatment at a prescribed temperature. The input parameters of the model are achieved from experimental and molecular dynamics investigations. To validate the model, the average diameter and size distribution of η' precipitates attained from the developed phase-field model were compared with those measured from transmission electron microscopy examinations. The experimental as well as the model results demonstrated that only a few percent of η' precipitates are dissolved completely... 

The aim of this article is to present an efficient dynamical model for simulating flapping robot performance employing the bond graph approach. For this purpose, the complete constitutive elements of the system under investigation, including the main body and accessories, flapping mechanism, flexible wings and propulsion system consisting of a battery, DC motors and gear boxes, are considered. A complete model of the system was developed appending bond graph models of the subsystems together utilizing appropriate junctions. The wings were also modeled using ANSYS only for an initial evaluation. Moreover, a computer model was developed employing the block-oriented structure of Simulink in...