Loading...
Search for: ebrahimian-kafshaei--atefeh
0.113 seconds

    Microalgae Cultivation for Simultaneous Treatment of Municipal Wastewater and Biofuel Feedstock Production

    , M.Sc. Thesis Sharif University of Technology Ebrahimian Kafshaei, Atefeh (Author) ; Vossoughi, Manoochehr (Supervisor) ; Kariminia, Hamid Reza (Supervisor)
    Abstract
    Depletion of fossil fuels and their price increase, world is going to face critical energy challenges in the near future. Thereforefinding proper replacements for fossil fuels is inevitable. On the other hand, releasing of huge amount of wastewater into environment imposes serious nvironmental threats. Microalgae can be a potential alternative for biological wastewater treatment as well as fuel production. Microalgae grown in wastewater can eliminate remaining nitrogen and phosphorous. The gorwn biomass can be used for biofuel production afterward. Microalgae can also decrease the amount of greenhouse gas through the consumption of CO2 as energy sources. In this study, nutrient removal from... 

    A Successive Boundary Element Model for Investigation of Sloshing Frequencies and Equivalent Mechanical Model in Multi Baffled Containers

    , M.Sc. Thesis Sharif University of Technology Ebrahimian, Masoud (Author) ; Haddadpour, Hassan (Supervisor)
    Abstract
    This study presents a developed successive boundary element method to determine the sloshing natural frequencies, mode shapes and equivalent mechanical models for multi baffled 2D and axisymmetric containers with arbitrary geometries. The developed fluid model is based on the Laplace equation and Green's theorem. The governing equations of fluid dynamic and free surface boundary condition are also applied to proposed model. A zoning method is presented to model arbitrary arrangement of baffles in multi baffled axisymmetric tanks. The influence of each zone on neighboring zones is applied by introducing interface influence matrix which correlates the velocity potential of interfaces to their... 

    Dynamical tidal locking theory: A new source of the spin of dark matter halos

    , Article Astrophysical Journal ; Volume 912, Issue 1 , 2021 ; 0004637X (ISSN) Ebrahimian, E ; Abolhasani, A.A ; Sharif University of Technology
    IOP Publishing Ltd  2021
    Abstract
    We revisit the question of what mechanism is responsible for the spins of halos of dark matter. The answer to this question is of high importance for modeling galaxy intrinsic alignment, which can potentially contaminate current and future lensing data. In particular, we show that when the dark matter halos pass nearly each other in dense environments - namely halo assemblies - they swing and spin each other via exerting mutual tidal torques. We show that this has a significant contribution to the spin of dark matter halos comparable to that calculated by the so-called tidal torque theory. We use the results of the state-of-the-art simulation of Illutris to check the prediction of this... 

    Spin alignment of dark matter halos: Fast halos

    , Article Astrophysical Journal ; Volume 926, Issue 2 , 2022 ; 0004637X (ISSN) Ebrahimian, E ; Abolhasani, A ; Sharif University of Technology
    IOP Publishing Ltd  2022
    Abstract
    We investigate the spin alignment of dark matter halos by considering a mechanism somewhat similar to tidal locking; we dub it tidal-locking theory (TLT). While tidal torque theory (TTT) is responsible for the initial angular momentum of dark matter halos, TLT explains the angular momentum evolution during nonlinear ages. Our previous work showed that close encounters between halos could drastically change their angular momentum. This paper argues that TLT predicts partial alignment between the speed and spin direction for large high-speed halos. To examine this prediction, we use IllustrisTNG simulations and look for the alignment of the halos' rotation axes. We find that the excess... 

    Dynamics of Protein-Embedded Vesicles in Simple Shear Flow

    , M.Sc. Thesis Sharif University of Technology Hoore, Masoud (Author) ; Jalali, Mir Abbas (Supervisor) ; Khoshnood, Atefeh (Co-Advisor)
    Abstract
    Studying the dynamics of vesicles in simple shear flow is the first step to decipher the dynamics of cells in flows or the motion of vesicle-based nanoparticles in vessels for drug delivery. The deformation of vesicle in shear flow changes the permeability of its membrane and may lead to its rupture, both of which correlate with the transportation of vesicle cargos to their environment, especially important in drug delivery. The deformation of vesicles in shear flow not only depends on the physical properties of the whole system, such as temperature, but also on the mechanical properties of three media: vesicle membrane plus vesicle’s inner and outer fluid. The effect of the mechanical... 

    Oxidation of Sulfides and Olefins in the Presence of Nanocluster Polyoxotungstate–intercalated Layered Double Hydroxide Nanoparticles as a Catalyst

    , M.Sc. Thesis Sharif University of Technology Qoreishi Kavardi, Atefeh Sadat (Author) ; Bagherzadeh, Mojtaba (Supervisor)
    Abstract
    In this study, polyoxometalate (POM) intercalated in the layered double hydroxide (LDH) was synthesized by a selective ion-exchange method. For this purpose, the nanocluster [VW12O40]3- was immobilized on the Mg2+/A13+/Cl–LDH support. The heterogeneous catalyst was characterized by FT-IR, XRD, SEM and analysis of ICP. The LDH-POM was applied as a catalyst in efficient oxidation of sulfides to sulfoxides using UHP as oxidant and CH3OH/ CH¬2¬Cl¬2 ¬as a solvent at room temperature, as well as epoxidation of olefins using TBHP as an oxidants and C¬2H4Cl2 as a solvent in 84°C. This catalyst showed excellent catalytic activities for a substrate/catalyst ratio (200:1). For example, this catalytic... 

    Effects of Graphene Nanopores and Temperature on DNA Sequencing Using Molecular Dynamics

    , M.Sc. Thesis Sharif University of Technology Majdi, Amin (Author) ; Meghdari, Ali (Supervisor) ; Khoshnood, Atefeh (Co-Advisor)
    Abstract
    Distinguishing the structure of DNA is of outmost importance in the medicine and agriculture industry nowadays. Various methods have been suggested so far; however, high costs, incorrect results, and time-taking process are among main defects of them. Scientists try to find new ways for recognizing DNA structure and system in order to overcome such problems. One of these new methods is absorbing and passing DNA through Nano-pores in an electrolyte solution under the influence of an electrical field. The basis of this method is the ionized currents which occur due to the passing of DNA through Nano-pores. Because each DNA base pairs can form a barrier corresponding to a unique measured value,... 

    Long Period Variable Stars in the Local Group Galaxies

    , M.Sc. Thesis Sharif University of Technology Hashemi, Azim (Author) ; Rahvar, Sohrab (Supervisor) ; Javadi, Atefeh (Co-Supervisor)
    Abstract
    In this thesis, the star formation history and evolution of IC 1613 dwarf galaxy and NGC 5128 giant elliptical galaxy has been studied. About IC 1613, our result shows that the star formation history of the galaxy is roughly constant in 5 Gyr ago and this support that the galaxy had been isolated at least in 5 Gyr ago. About NGC 5128, we can see that the star formation rate has suddenly increased in 700 Myr and 3.5 Gyr ago. This results in very good agreement with literature support that the galaxy has experienced some mergers with smaller gas rich galaxies  

    The Interest Rate of “Transactional Loans” and Average Productivity of Capital in Iran’s Economy

    , M.Sc. Thesis Sharif University of Technology Ebrahimian, Mehran (Author) ; Madanizadeh, Ali (Supervisor)
    Abstract
    In this research, I propose a macro-finance model with asymmetric information between firms and banks to investigate the capital misallocation effect of government interventions in financial markets of Iran’s economy, in terms of setting the price of “Transactional Loans”. In the presence of adverse selection, interest rate may be an instrument for screening lowproductive firms; however, the moral hazard problem of low productive firms with voluntary default, cancels out the filtering mechanism in high interest rates, if the cost of default for low-productive firms is low and judicial systems are poor in enforcing contracts. Hence, government repression/regulation policies do not affect the... 

    Product Portfolio Management Using Life Cycle Considerations

    , M.Sc. Thesis Sharif University of Technology Ebrahimian, Mahsa (Author) ; Fattahi, Omid (Supervisor)
    Abstract
    Today’s organizations always encounter limitations on the way of achieving their goals. Budget constraint, inventory constraints, capital constraints are issues which complicates management decision making.
    Global market has enabled manufacturers compete globally. Even position their factories in other countries and use of competitive advantages and other markets demand. This is why decision making in production and manufacturing domain has been complicated. Decision making in production and manufacturing should become faster and more precise in order to keep market competitiveness. Organization should make long term or strategic decisions and short term decisions about keeping the... 

    Friction stir soldering: a novel route to produce graphite-copper dissimilar joints

    , Article Materials and Design ; Volume 116 , 2017 , Pages 599-608 ; 02641275 (ISSN) Ebrahimian, A ; Kokabi, A. H ; Sharif University of Technology
    Elsevier Ltd  2017
    Abstract
    In this study, friction stir soldering (FSS) as an emerging joining process with the aid of a preliminary electroplating process was utilized for the first time to fabricate graphite-copper lap joints aimed at investigation of rotational speed influence on joint interface microstructure and mechanical behaviour. To do so, an Sn-37Pb solder foil was placed between a copper sheet and a copper-coated graphite substrate after which a rotating pin-free tool was plunged into the copper sheet and allowed to travel along the joint. Results indicated that adhesive strength between the electroplated copper coating and graphite substrate was strongly affected by surface roughness and plating current... 

    The Effect of the Flexibility of Foundation Structural Elements on Global Response of Soil-Structure System

    , M.Sc. Thesis Sharif University of Technology Ebrahimian, Mahdi (Author) ; Ghannad, Mohammad Ali (Supervisor)
    Abstract
    In order to simplify the dynamic analysis of soil-structure systems, the structural element of the foundation is usually assumed to be rigid. While the rigid foundation assumption is acceptable for block-type machine foundations, it may influence the dynamic response of other structures such as structures with a central rigid core. Previous research has shown that the flexibility of the foundation structural elements affect dynamic stiffness of underlying soil so it can change the structural response. The aim of this thesis is to study the influence of foundation flexibility on the global response of soil-structure systems including structures with a rigid core. Since the response of the... 

    Dynamic NMR Study of 2-Cyanoethyl-Pyrrolidine-1-Carbodithioate

    , M.Sc. Thesis Sharif University of Technology Ebrahimian, Javad (Author) ; Tafazzoli, Mohsen (Supervisor)
    Abstract
    In this project rotational barrier of C-N bond in 2-Cyanoethyl-Pyrrolidine-1-Carbodithioate has been studied using DNMR spectroscopy. Spectra were taken at various temperatures, and then with simulation of bandshape broadening pattern, rate constants of exchanges were obtained for all temperatures. For simulation of line-shape broadening SpinWorks software was used,which with two interfaces made possible simulation with two bandshape simulator programs, DNMR and MEXICO. The rate constants obtained from simulations, were used for calculation of thermodynamic activation parameters (ΔG#, ΔH#, ΔS# and Ea#). Experimental ΔG# value of 18.4 Kcal mol-1 for 2-Cyanoethyl-Pyrrolidine-1-Carboditioate in... 

    An analytical 3-D model for calculating eddy-current damping force for a magnetic levitation system with permanent magnet

    , Article IEEE Transactions on Magnetics ; Volume 48, Issue 9 , Sept , 2012 , Pages 2472-2478 ; 00189464 (ISSN) Ebrahimian, M ; Khodabakhsh, M ; Vossoughi, G ; Sharif University of Technology
    IEEE  2012
    Abstract
    An analytical solution for obtaining steady-state eddy-current-based force on a levitated permanent magnet above a plate with linear conductivity in the field of an electromagnet having cylindrical symmetry is presented in this paper. In literature, the force due to eddy current in this levitation system have been used for high precision positioning of a levitated permanent magnet without providing an explicit analytical model. In this system, a change in the coil's current and also the motion of the levitated permanent magnet in 3-D space generate eddy current in the plate. A novel explicit solution for obtaining damping forces due to these eddy currents is obtained as a function of... 

    Friction Stir Soldering of Copper Coated Graphite-Copper Joints by Sn-Pb Solder

    , M.Sc. Thesis Sharif University of Technology Ebrahimian, Ali (Author) ; Kokabi, Amir Hossein (Supervisor)
    Abstract
    Friction stir soldering (FSS) or brazing (FSB) as an emerging joining process, was first developed to resolve some shortcomings in FSLW and FSSLW such as excessive IMC layer thickness and confined bond area. Although it has advantages over conventional furnace soldering and/or brazing, including localized heating, less detrimental thermal effects on the substrates and capability to reduce the amount of voids at the joint interface. The aim of this study is to investigate the effects of rotational speed, traverse speed and plunge depth of the pinless tool on the shear strength and electrical resistivity of the copper-coated graphite-copper FSSed joints with the aid of Sn-37Pb solder alloy. At... 

    Irreducible subgroups of gl1(D) satisfying group identities

    , Article Communications in Algebra ; Volume 33, Issue 9 , 2005 , Pages 3367-3373 ; 00927872 (ISSN) Ebrahimian, R ; Kiani, D ; Mahdavi Hezavehi ; Sharif University of Technology
    2005
    Abstract
    Let D be a finite dimensional F-central division algebra and G an irreducible subgroup of D*: = GL1(D). Here we investigate the structure of D under various group identities on G. In particular, it is shown that when [D : F] = p2, p a prime, then D is cyclic if and only if D* contains a nonabelian subgroup satisfying a group identity  

    The Origin of Angular Momentum in Cosmological Structures

    , Ph.D. Dissertation Sharif University of Technology Ebrahimian, Ehsan (Author) ; Abolhassani, Ali Akbar (Supervisor)
    Abstract
    Explaining the angular momentum of the cosmological structures is an essential part of the structure formation theory, and it is not fully understood yet. The Tidal Torque Theory (TTT) is the standard explanation of the initial angular momentum of the halos based on the gravitational instability picture. It predicts the angular momentum growth with linear approximation and has been confirmed for linear stages of proto-halos, but the final halo is a highly non-linear object. Nonlinear effects are hard to model, however, we propose a new mechanism for the nonlinear evolution of the halos. We suggest that when two halos pass by each other, their angular momentum changes with a similar mechanism... 

    Study and Comparison the Incidence of Dutch Disease in Iranian Economy in Two Periods of Oil Shock

    , M.Sc. Thesis Sharif University of Technology Momeni, Atefeh Sadat (Author) ; nili, Masoud (Supervisor) ; Madanizadeh, Ali (Supervisor)
    Abstract
    This paper studies and compares the effect of "Dutch disease" in Iranian economy in two periods of rising oil price (1973-1978) and (2004-2010). The study presents a DSGE model to analysis the behavior of economic variable in both periods and to address this question that whether or not policy maker has learning behavior. The model consists of households, final goods producers who divided in tradable goods and non-tradable goods sector and the government. I use calibration methods to estimate models parameters.Comparison of simulated results and the actual macroeconomic variables in Iran during 1338-1390 indicates that, first of all Dutch disease effect occur in both periods of oil shock so... 

    Lipid production in mixotrophic cultivation of Chlorella vulgaris in a mixture of primary and secondary municipal wastewater

    , Article Renewable Energy ; Vol. 71 , November , 2014 , pp. 502-508 ; ISSN: 09601481 Ebrahimian, A ; Kariminia, H. R ; Vosoughi, M ; Sharif University of Technology
    2014
    Abstract
    Microalgae's biomass productivity and oil content depend heavily on the method of its cultivation. In this study, nutrient removal from municipal wastewater by Chlorella vulgaris in batch culture was investigated. Carbon dioxide was supplied from sodium hydrogen carbonate. Effect of parameters including light intensity, sodium hydrogen carbonate concentration, and daily illumination time on the productivity of biomass and lipid was investigated. Lipid and biomass production of C.vulgaris increased at higher concentration of sodium hydrogen carbonate concentration and higher light intensity until a certain value and then decreased, but longer daily illumination time, increased both biomass... 

    Equivalent mechanical model of liquid sloshing in multi-baffled containers

    , Article Engineering Analysis with Boundary Elements ; Vol. 47, issue. 1 , Octobe , 2014 , p. 82-95 Ebrahimian, M ; Noorian, M. A ; Haddadpour, H ; Sharif University of Technology
    2014
    Abstract
    This study presents a method to determine an equivalent mechanical model (EMM) for multi-baffled containers with arbitrary geometries. The method is implemented for 2D and axisymmetric containers. The Laplace equation and Green's theorem are used to develop the fluid model and the boundary element method (BEM) is used to solve the fluid field governing equation. Moreover, a zoning method is utilized to model arbitrary arrangements of baffles in multi-baffled containers and a reduced order model is developed to model the free-surface sloshing. The exerted hydrodynamic pressure distribution, forces and moments on the walls of the container are determined based on the Bernoulli equation and a...