Sharif Digital Repository

The Endurance Time Method is reprehensively new and comprehensive method for analyzing and designing the structure quality in based on performance that is related on time history analysis for investigating structure systems under dynamical instigation in result of earthquake. In this evaluation the index comparison in based on endurance time against of applied acceleration function. The result of the structure will plot against time, until the structure will achieve to a special amount of damage. The high endurance time means high performance. While the damage index will maintain less than allowable limit until endurance time, the structure will be approvable.In this project the ability of... 

The structure performances during past earthquakes indicate the importance of predicting behaviors of irregular structures under earthquakes. If the irregularity exceeds an expected limit, a seismic analysis should be carried out by a dynamic analysis method. The Endurance Time (ET) is a time-history method, base on dynamic analysis for seismic analyzing and designing the structures, in which structures are subjected to intensifying accelerogram functions and their Endurance Time is measured. One of the most applicable methods for RCF analysis is the Concentrated Hinge Model which is used in this research too. The needed parameters for modeling plasticity in concentrated hinge are achieved... 

In recent years, by development of computer and analytical software, engineers intended to do complicated and delicate dynamic analysis instead of static ones. This cause reduction in uncertainty in structures analysis and designing, that improves environmental, economical, and safety performance. Currently there are two common methods which are accepted in major building codes, they are spectral and time history dynamic analysis which the former analyzes structures by using design code spectra based on determination of structures’ dynamic haracteristics, and the latest do it by imposing ground motions on the structure. The spectral dynamic analysis method has some errors and causes... 

Endurance Time Method (ET) is a type of dynamic pushover procedure in which the structure is analyzed under special series of accelerograms, called ET acceleration Functions (ETAF) and the response of structure is sketched versus time until the collapse state. With evaluating response curve and the time which damage in structure reach the expected value, the final assessment of structure can be made. In this dissertation, the application of ET method for Non-linear 3 dimensional seismic analysis of steel moment frames under earthquake multicomponent excitation is investigated. For this purpose, various patterns of ET loading are investigated and the most appropriate algorithm in... 

Endurance Time (ET) is a fairly comprehensive analytical method based on time history analysis applied for evaluating structural systems excited by dynamic loading of earthquake. In such evaluation assessment measure is based on endurance time of structure versus applied accelerogram function and parameters such as stiffness, lateral resistance, period of vibration and dynamic characteristics are not used directly. In this research nonlinear dynamic analysis of elevated steel tanks with laterally braced framed tower under the loading of earthquake records and ET accelerograms was studied and effectivity of ET method in analyzing such elevated tanks was verified. Due to complication of... 

In this research the appilication of a new method named Endurance Time (ET) analysis in seismic analysis of multi span bridges in linear and nonlinear ranges is investigated. Endurance Time is a time history based method of seismic analysis. In this method structure is subjected to an intensifying predefined acceleration function and different damage indices of the structure are evaluated through analysis time. The Endurance Time criterion and the Endurance Time acceleration functions have been generated in previous researchs of ET group. Using 7 earthquake records which are selected from hundred ones of PEER database based on FEMA p695 recommendations, several scaling methods are used to... 

In the earthquake conditions, the collapse of cooling towers can stop power station activities and heavy financial losses that can be led increasing disaster dimentions finally. In this thesis for analysis of concrete hyperbolic cooling towers and generally for analysis of shell structures, the endurance time (ET) method benefits are used. Also with comparision between ET and standard time history method (THA), accuracy and probable errors of ET method are discussed. It should be noted that ET method is a new time history based method of seismic analysis expect that in this method, structure is imposed under specific intensifying acceleration functions. ET method is capabable for nonlinear... 

Recent studies show that irregular structures have been damaged more than regular ones during earthquakes. This proves importance of seismic response determination of this type of structures. Today, Codes define irregularity in structures and restrict seismic analysis and design of these types of structures. The Endurance Time (ET) method is a time-history based dynamic pushover procedure for seismic analysis and design of structures that has been recently proposed in Sharif University. This thesis illustrates ET capability in analysis and design of vertically irregular frames. Irregular frames with three, seven and twelve story high were designed with two types of mass and stiffness... 

Nowadays using traditional hollow clay brick in buildings to make walls and partitionsisvery common. Non-load-bearing walls in buildings are used as architectural elements for design purposes and protecting the people that are inside the building from cold , heat and sound pollution .Due to the new technologies and developing building codes interms of structure , non-load-bearing walls behaviour that is always neglected seems necessary to be considered. In this research we have investigated the static and dynamic behaviour of a patented non-load-bearing wall made up of a claybrick system with specially-designed-precision grooved faces that eliminates conventional cement mortar and results... 

With improvement of design and analysis techniques, use of irregular bridges has been expanded. These improve the aesthetics of urban spaces as well as providing shorter highways in impassables. Horizontally curved bridges are among the type of structures, which needs to be designed based on three-dimensional analysis. In this thesis, three-dimensional nonlinear analysis was performed by Endurance Time Method (ET) on horizontally curved bridges. Nonlinear models have been analyzed under ET acceleration functions. Comparing ET results in DBE level with earthquake responses, the difference between these two methods were determined. ET estimated earthquake responses with good accuracy;... 

The objective of this research is to evaluate the concept of a new design methodology based on the total value of the structure namely Value Based Design of structures (VBD) by the use of potential benefits of the ET method. While prescriptive and also performance based approaches of seismic design commonly try to find a structure with lower initial cost satisfying a number of requirements under seismic actions, a new design approach to incorporate directly the concept of value in design procedure have been formulated here to achieve an economical design with lower total cost in its life time. In this method the design sections of structural elements are considered as optimization parameters... 

The aim of this research is value based optimum design of structures to minimize the costs imposing on them during lifetime. For this purpose, an optimization procedure is used to get optimum solutions. Therefore, in this optimization problem, total costs are objective functions and required limits of codes are as the constraints. The costs include initial costs of constructing and life cycle costs. The weight of structural components and seismic consequences during the lifetime of structure are used as a criterion to assess initial costs and life cycle costs, respectively. In this research, seismic losses are determined based on the probabilistic seismic assessment framework, which depends... 

Based on special properties of metal dampers such as high energy dissipation, stable hysteric cycles and simple application, low cost, insensitivity to changes of temperature and ability to be substituted after occurring of earthquakes, they are being used for structures control. ADAS and SSD are two kinds of metal dampers which are connected to top of the chevron braces and under the middle of beams. When shear forces are applied, these dampers yield and enter the plastic zone. In Endurance Time (ET) method gradually intensifying acceleration functions are created in a manner that the linear and nonlinear response spectra of them, while being proportional to average of real earthquakes... 

Exact and safe structural analysis and design under various loadings is an important issue, which have engaged engineers for a long time. Till now, building design codes have suggested three main methods for seismic analysis of structures, which consist of: Static analysis, Pseudo-dynamic response spectrum analysis and Time history analysis. The first two methods are too approximate, especially in irregular structures which demand exact 3d analyses. The most reliable method is Time history method. With advance of computational tools, engineers tend toward using more reliable analysis methods and using old fashioned rough methods is becoming less popular. One of the issues, which is important... 

Modified Fish-Bone (MFB) Model and Consistent Generic (CG) Model are simplified Multi-Degrees-of-Freedom (MDOF) models, proven to be valuable tools in estimating seismic demands of moment-resisting frames, aimed to reduce the computational costs by decreasing the number of degrees of freedom. The preliminary expansion of these simplified models for steel moment resisting frames (SMRFs) were proposed by considering elastoplastic behavior and is not able to take into account stiffness and strength deteriorations in nonlinear dynamic behavior of structures. However, behavior deterioration affects seismic demands of SMRFs under intense earthquakes. For this reason, the present study is done to... 

The expansion of new analytical methods along with evolving computational tools has accelerated the recognition of obscured nonlinear behavior of structures. In this process, the innovative Endurance Time method is a great step which presents a comprehensive assessment of structural behavior with less computational cost. The accuracy of this method among the unpredictable nature of earthquake engineering, as well as its fastness and simplicity, has attracted the attention of researchers. This research is part of a project on introducing and assessing the capacities and restrictions of the Endurance Time method, which investigates its usage in analyzing performance of concrete structures with... 

In most places in the world as it is in our country, structural vibration caused by earthquakes are among the most destructive menaces for the building. For this reason one of the main goals for civil engineers is constructing structures that can perform properly in an earthquake-exposed situation. For moving toward this goal it is necessary to estimate structural responses considering probable earthquake excitation and use these data for design of new structures or retrofitting of existing ones. In this research, the capability of a new method named Endurance Time analysis in seismic assessment of concrete moment frame is investigated in nonlinear range. ET is a new dynamic time history... 

In recent decades, most of the codes have placed a high value on Performance Based Design of structures; however, these methods are computationally complex and time-consuming, and caused researchers to seek new and efficient methods to investigate performance of structures under different intensities of seismic loading. This issue is much more obvious when optimum design of structures, which requires repetitive analysis, is investigated. This investigation tries to provide better insights into the dynamic behavior of structures in continuous performance levels. As a first step, this research aims at analytical investigation of new type of metallic damper called Cartridge Damper, and in the... 

Bridge is one of the most important structure that are used in urban transportation system. In recent decade, international standards and codes have introduced “Performance Based Design” for structure design criteria. Large and complex dynamic and time history analyzes are obstacles against this method; especially in finding optimum design that requires repeated analyzes. In this research, application of Endurance Time (ET) method in seismic design of urban concrete bridges has been evaluated and value based design of them has been presented. In ET method, seismic performance of structures under artificial intensifying accelerograms is investigated. Performance of structure in... 

The actual value of structures should not be evaluated only based on initial cost, because failure cost and economical losses due to corrosion and natural hazards can be catastrophic. The aim of this research is Comparative study of life cycle cost of steel and concrete building systems designed based on standard 2800 by Endurance Time Method. These costs include initial cost and life cycle cost Due to the aftermath of the earthquake in the life of the structure. In this research, because it requires a lot nonlinear dynamic time history analysis, Endurance Time Method used which is both good accuracy and also drastically reduces the cost of computing-off. Selected models for the study, four,...