Sharif Digital Repository

In this thesis an analytical solution is introduced for finding the elastic fields of stress and strain in a confocal elliptic ring at the state of general plane problem. A confocal elliptic ring is a doubly connected region which its external and internal boundaries are ellipses with the same focal points. We used the method of complex variables, the functions of Kolosov-Muskhelishvili potentials, Laurent series expansion for analytical functions, the method of the analytic continuation of Milne-Thomson, elliptic hyperbolic coordinates, and two dimensional conformal mapping to do this study. the importance of this analysis is because we can simulate some problems of the elasticity by... 

The purpose of this research project was to improve the performance of TEG liquid membrane in separation of gas mixtures by adding zeolite LTA nanoparticles. Therefore, the NaA zeolite particles with nano size were synthesized with hydrothermal method at optimized condition. The supported liquid membrane with hydrophilic PVDF membrane and triethylene Glycol (TEG) was prepared in two different conditions. In the first one, the pores of the supporting membrane were filled with triethylene Glycol, whereas in the second one the pores were filled with the mixture of triethylene Glycol along with the 5 wt% and 10 wt% zeolite nanoparticles. The performances of prepared membranes were investigated... 

Heat transfer enhancement in heat transfer equipment, such as heat exchangers, has been widely studied. There are plenty of techniques to increase heat transfer in tubular heat exchangers. One of these techniques is applying a porous medium. These media have a great interface with fluids which can enhance the heat transfer rate. Meanwhile, the thermal conductivity of these media is usually greater than that of the studied fluid. Thus, by adding a kind of highly conductive porous insert to a heat exchanger, we are able to save the material used to construct the device and the space occupied by it.
Shell-and-tube heat exchangers are one of the most widely-used types of exchangers in... 

High entropy oxides are a group of oxides which consist of five cations and are stable at high temperature. Since these materials have unique properties such as high ionic media, high capacity and cycle stability, they can be considered for use in lithium-ion batteries. In this regard, in this research, for the first time, the effect of vanadium element in oxide with high entropy for use as anode in lithium-ion battery has been investigated. Therefore, (VCrMnNiCo)3O4 high entropy oxide has been synthesized by hydrothermal method and then the single-phase structure has been stabilized at 900°C. X-ray diffraction (XRD) and high-resolution transmission electron microscopy (HR-TEM) studies have... 

In this research, after examining the different strains available in the enzyme center's cell bank, the bacterial strain Pseudomonas aeruginosa (RPMC-B-3556) obtained from the Russian microbial collection was used for lipase production. This microbial strain has the ability to produce extracellular lipase enzyme and for this reason it has been selected as the target strain. The purpose of this research was to optimize the lipase production process in the culture of the appropriate strain. For this purpose, the compounds used in the culture medium are changed to investigate their effect on lipase enzyme activity. Considering that the studied strain has the ability to produce protease enzyme... 

Regarding the increasing trend of network costumers and services, requirement of high-speed and high quality seems to be inevitable. Therefor much effort has been put to issue the problem properly in recent years. Optical fiber networks are attending more attention and optical fiber channels are dominating the world of networking and data. Applying new methods such as CDMA and OFDM raise the issue of maximum achievable rate and quality of these systems.These include the main concentration of this project. First, optical channels are modeled.Then, applying OFDM and CDMA methods, lower and upper bound of channel capacity will be determined  

Design of superconducting material based wide band radiation detectors has recently been attractive. Interesting features of detectors, which are based on Josephson Junctions such as high sensitivity in a wide range of frequencies and low power consumption, potentially have many advantages over other semiconductor-based photo-detectors. According to variety of applications of high-Tc superconductors, particularly YBCO, and significant progress in manufacturing of thin films and Josephson junctions, this thesis mainly focuses on investigation of radiation effects on I-V characteristics of high-Tc step-edge Josephson junctions experimentally. The current-voltage characteristics of fabricated... 

Critical sets and defining sets in combinatorics have been attended by mathematics fans. These subjects have been debated since 1997 and a lot of researches have been done about them and a lot of articles have been published. But number of unsolved questions might be more than answered questions. In these years critical sets for Latin square and defining sets for vertex coloring have been attended and also enough researches about issues related to defining sets for edge coloring and total coloring have not been done. For these reasons we focus on these issues in this thesis. Issues like defining sets for edge coloring and total coloring in complete graphs, generalized Petersen graphs and also... 

Wear is the most important cause of surface damage occurs by direct contact of surfaces. Increasing the quality and strength of surface against different kinds of destructive phenomena is significant in manufacturing of mechanical parts. Surface nanocrystallisation can improve the surface protection against wear and can be done by lazer beam and shot peening. In this investigation by sever shot peening process the surface of A356 Aluminium alloy transforms to nanocrystal structure. The dry sliding wear and friction behaviors of A356 Aluminum were evaluated using a pin-on-disk apparatus at ambient conditions. The stationary diameter of 5mm stainless steel pin produced a wear track (scar) on... 

One of the best ways to overcome the weaknesses of technology services in different industries is right technology transfer with feasibility in the country. 3D painters have been recently widely used industrially in different countries. The 3D printer is one of the new emerging technologies, enabling the production of every 3D objects with any complexity. 3D printing has provided the possibility of producing, in fastest, more economics and regardless of those complexities. By transfer of this kind of technology and proper management, a huge transformation can created in all industries and factories. To do this, there are several technologies of 3D printing, that each of them used in various... 

Nowadays electricity power has a key role in developing various aspects of the world. The great importance of fossil fuel power plants come from their large contribution in electricity power generation. Among the different fossil fuel power generation technologies, supercritical power plants have great advantages. They are an advanced power generation technology with high plant efficiency, high coal utilization and low emission. Their complexity and existing many unavoidable uncertainty sources in their dynamic such as changes of ambient temperature, climate condition and wear of components make their control challenging. To overcome mentioned problems and achieving a good performance, a... 

The relationship between art and philosophy has been disputed for a long time and its history goes back to the ancient Greece. The dominant literary form at that time was poetry or tragedy, which are the first side of this relationship. On the other side was philosophical ethics. Plato and Aristotle are the main protagonists in this quarrel, which is known as the "Ancient Quarrel". I will first examine this quarrel and follow its different forms in the modern era, in which Hegel plays a prominent role by proposing the "end of art" thesis. By examining the criticisms made to this thesis, I will make clear the context in which the contemporary defenses that I explained in the following... 

The most important challenge in microgrids is the coordination of distributed energy resources (DERs), due to the existence of several DERs with fugacious characteristics. Also, energy management in the microgrid is very important because there may be conflicting needs or poor communication between different elements of the microgrid. In this work, a robust frame associated with a quantum version of the Teaching-Learning-Based Optimization (quantum TLBO) algorithm is proposed for the first time to the microgrid optimal energy management problem. Uncertainties in the load and in the output power of renewable energy sources are modeled using robust optimization (RO). The operation cost of the... 

In this dissertation, Data analysis and information retrieval from incomplete observations are investigated in different applications. Incomplete observations may be induced by lack of observations or part of data affected by specific noise (quantization noise). Data-driven algorithms are among important hot topics. Our goal is to process the lost information inducing certain assumption on big data structures. Then, the approach is to mathematically model the problem of interest as an optimization problem. Next, the designed algorithms for the optimization problems are proposed trying to cut down on the computational complexity of as well as enhancing recovery accuracy for big data... 

The Internet of Things (IoT) is one of the fields witnessing a significant growth in recent years and is expected to make the lives of so many people go under substantial changes. IoT will exploit large numbers of smart objects in people’s everyday life to bring smartness into reality and this necessitates correct and seamless connection and integration between smart entities. One of the key tasks of the IoT platform is providing such a connection, which is assigned to the resource discovery framework.A resource discovery framework should consider requirements and challenges present in the IoT environment. Heeding the literature, one finds deficiencies in this field. These shortcomings are... 

Expert finding is an important task in community question answering (CQA) websites, enabling the routing of new questions towards users who have the highest level of expertise in the relevant topic. This method helps question raisers receive satisfactory responses in a shorter time and makes it easier for answerers to find questions they are interested in and have enough expertise to answer. . The primary goal in expert finding is to learn the representation of questions and expert candidates based on the history of answered questions. Many existing approaches generate a unique representation for users without considering the specific question asked. Additionally, many of these approaches...