Sharif Digital Repository

A numerical simulation has been carried out to investigate the heat transfer enhancement in a shell-and-tube heat exchanger using a porous medium inside its shell and tubes, separately. A three-dimensional geometry with k-ε turbulent model is used to predict the heat transfer and pressure drop characteristics of the flow. The effects of porosity and dimensions of these media on the heat exchanger's thermal performance and pressure drop are analyzed. Inside the shell, the entire tube bundle is wrapped by the porous medium, whereas inside the tubes the porous media are located in two different ways: (1) at the center of the tubes, and (2) attached to the inner wall of the tubes. The results... 

With the significant role that warehouse plays in connection to suppliers, distributors, and clients, and considering the costliness of storage systems, efforts have focused on the reduction of procedural expenses. Among the most significant expenses, one involves the distance traveled by operators or S/R machinery for the selection of ordered items; the common solution to which has been through the classification of stored items. Previous articles have focused on linear solutions to the abovementioned problem, such as P-Median. This article shall focus on the problems arising from the said solution, and instead a non-linear method proposed. Further, a heuristic algorithm is produced for the... 

Knowing the metal content of electronic waste is essential to evaluate metal recovery. Lack of a standard method for digestion of precious metals from electronic waste has resulted in difficulty in comparison to the efficiency of recovery. In this study, different precious metal digestion methods and economic value of precious metals from different types of waste printed circuit boards in different fraction sizes, including computer printed circuit boards, mobile phone printed circuit boards, television printed circuit boards, fax machine printed circuit boards, copy machine printed circuit boards, and central processing unit were examined. The optimal digestion method using aqua regia,... 

Using the public network for distributed computations compromises the immunity of control loops to cyberattacks such as data manipulation and eavesdropping. These risks have forced control system engineers to find solutions to protect control systems against these dangers. Encrypted control studies these dangers and tries to propose new modified control systems to increase the immunity of the control systems. Secret sharing is one of the tools used in the encrypted control field. In this paper, we modify this tool to propose an algorithm to design a secure control system. This scheme while guarantees the security of the control systems, can attenuate the measurement noise as well. To achieve... 

Veronica genus (Plantaginaceae) is broadly distributed in different habitats. In this study, the inhibitory activity of free soluble and conjugated phenolic extracts of Veronica persica on key enzymes associated to type 2 diabetes (α-glucosidase and α-amylase) and hypertension (angiotensin I converting enzyme, ACE) was assessed, as well as their antioxidant power. Our results showed that both the extracts inhibited α-amylase, α-glucosidase and ACE in a dose-dependent manner. In particular, free phenolic extract significantly (P < 0.05) inhibited α-glucosidase (IC50 532.97 μg/mL), whereas conjugated phenolic extract significantly (P < 0.05) inhibited a-amylase (IC50 489.73 μg/mL) and ACE... 

Gait training is a critical rehabilitation procedure for patients suffering from walking problems. It, however, puts the therapist in high orthopedic risk since he should prevent the patient from possible falling. Body weight support system is a new technology helping such patients and the involved therapist by unloading a percent of the patient's weight. A new over-ground body weight support is introduced in this article. The system is composed of two main modules namely unloading and traction. The unloading module is capable of suspending an individual's weight up to 1000N dynamically. The whole system is attached to an overhead rail, moving over the head of the patient by the traction... 

The failure analysis of a ruptured superheater tube after 20. years service in the oil-fueled boiler, as the typical problems in power plants, was investigated. A thin-lipped rupture at failed region was observed in superheater tube. By measuring the tube's wall thicknesses far from failed region, non-uniformity was seen. The suggested main root cause of failure was fireside corrosion of the tube during the service. Because of low grade of used fuel, sodium, sulfur, and vanadium elements were observed at the outer surface, which caused continuously scale formation and reduction of wall thickness, by metal consumption. In addition, it seems that it has been worsened by occurrence of long-term... 

High rates of mortality and morbidity stemming from cardiovascular diseases unveil extreme limitations in current therapies despite enormous advances in medical and pharmaceutical sciences. Following myocardial infarction (MI), parts of myocardium undergo irreversible remodeling and is substituted by a scar tissue which eventually leads to heart failure (HF). To address this issue, cardiac patches have been utilized to initiate myocardial regeneration. In this study, a porous cardiac patch is fabricated using a mixture of decellularized myocardium extracellular matrix (ECM) and chitosan (CS). Results of rheological measurements, SEM, biodegradation test, and MTT assay showed that the... 

Streaming potential measurement is one of the electrokinetic techniques used to determine the average zeta potential of porous rock which can provide reliable information on reservoir flow behavior and wettability state of the rock surface. Streaming potential measurement using electrodes has recently been introduced in the oil reservoirs applications and there are still significant uncertainties during the measurements and interpretation of streaming potential results. The primary purpose of this work is to establish a setup to measure the streaming potential of porous media with low scattering and evaluate voltage measurements based on the paired stabilization and pressure ramping methods.... 

Inference and Estimation in Missing Information (MI) scenarios are important topics in Statistical Learning Theory and Machine Learning (ML). In ML literature, attempts have been made to enhance prediction through precise feature selection methods. In sparse linear models, LASSO is well-known in extracting the desired support of the signal and resisting against noisy systems. When sparse models are also suffering from MI, the sparse recovery and inference of the missing models are taken into account simultaneously. In this paper, we will introduce an approach which enjoys sparse regression and covariance matrix estimation to improve matrix completion accuracy, and as a result enhancing... 

In order to examine the impact of structural and thermal scale parameters on thermoelastic vibrations of Euler-Bernoulli nanobeams, this article intends to provide a size-dependent generalized thermoelasticity model with the help of nonlocal strain gradient theory (NSGT) in conjunction with dual-phase-lag (DPL) heat conduction model. To highlight the role of each scale parameter in size-dependent motion and heat conduction equations, normalized forms of these nonclassical coupled thermoelastic equations are extracted by introducing and exploiting some dimensionless parameters. By exploiting power series expansion as a general solution for arbitrary boundary conditions, system of partial... 

Localization of radio-frequency (RF) transmitters using time difference of arrival (TDOA)-based methods is one of the conventional passive techniques that admits noncooperative source position finding, but suffers from challenging requirements such as precise intersensor synchronization and high-throughput transmission data links. A tradeoff governing the TDOA systems is in the sensor placement configuration. The more distance the sensors are placed, the more accurate localization is carried out, while the cost for the synchronization and data link increases, at the same time. In this work, a novel reconfigurable intelligent surface (RIS)-aided localization system is proposed that enjoys... 

In order to examine the impact of structural and thermal scale parameters on thermoelastic vibrations of Euler-Bernoulli nanobeams, this article intends to provide a size-dependent generalized thermoelasticity model with the help of nonlocal strain gradient theory (NSGT) in conjunction with dual-phase-lag (DPL) heat conduction model. To highlight the role of each scale parameter in size-dependent motion and heat conduction equations, normalized forms of these nonclassical coupled thermoelastic equations are extracted by introducing and exploiting some dimensionless parameters. By exploiting power series expansion as a general solution for arbitrary boundary conditions, system of partial... 

The preparation of high aspect-ratio TiO2 nanotubes and their photocatalytic activity were demonstrated in this study. The high aspect-ratio TiO2 nanotube thin films were produced by electrochemical anodic oxidation of Ti in chloride-containing electrolytes. Nanotubes were doped with different concentrations of ZnO particles through anodization. The catalytic behavior was evaluated under batch reactor with photo-degradation test of Red Dye. The experimental results collectively demonstrate the successful ZnO doping of the resultant nanotube layers with significant abundant OH groups on their increased surfaces. The nanotubes doped with high content combined with an anatase as a two phase... 

An efficient algorithm for the design optimization of the compressible fluid flow problem through a flexible structure is presented. The methodology has three essential parts: first the behavior of compressible flow in a supersonic diffuser was studied numerically in quasi-one-dimensional form using a flux splitting method. Second, a fully coupled sequential iterative procedure was used to solve the steady state aeroelastic problem of a flexible wall diffuser. Finally, a robust Genetic Algorithm was implemented and used to calculate the optimum shape of the flexible wall diffuser for a prescribed pressure distribution. © 2006 Elsevier Ltd. All rights reserved  

With the rise in oil price and population growth, renewable energies are assumed to be the main source of energies for the next generation. Wind as a natural, eco-friendly and renewable source of energy has been at the center of concentration for decades. Recently there has been some ideas regarding the self-regulating urban wind turbines. Researchers have shown that a proper enclosure increases the wind velocity and therefore more torques can be exerted on the rotors, therefore more power can be generated. These enclosures are light and cheap, therefore they are applicable and effective. In the present study, an enclosure was modified to increase the exerted torque with implementing a step...