Sharif Digital Repository

Propagation of acoustic waves in the one-dimensional (1D) random-dimer (RD) medium is studied by three distinct methods. First, using the transfer-matrix method, we calculate numerically the localization length ξ of acoustic waves in a binary chain (one in which the elastic constants take on one of two values). We show that when there exists short-range correlation in the medium-which corresponds to the RD model-the localization-delocalization transition occurs at a resonance frequency ωc. The divergence of ξ near ωc is studied, and the critical exponents that characterize the power-law behavior of ξ near ωc are estimated for the regimes ω> ωc and ω< ωc. Second, an exact analytical analysis... 

We study the metal–insulator transition in one-dimensional Anderson binary alloy with long-range disordered hopping integrals and on-site energies using the transfer matrix method. In this model, the on-site energies and hopping integrals are distributed randomly with long-range correlations characterized by power spectrum of the type (Formula presented.), with different exponents (Formula presented.) and (Formula presented.), respectively. We determine the critical value of long-range correlation exponent of hopping integral (Formula presented.) in the presence of only off-diagonal disorder in which the transition from localized to extended states occurs in thermodynamic limit. When both of... 

We study the electronic properties of superlattice with rough interfaces in two and three dimensions using the transfer-matrix method and direct diagonalization of the Anderson Hamiltonian. The system consists of layers with an average constant width, but with stochastic roughness added to the interfaces between the layers. The numerical results indicate that, in the thermodynamic limit, the two-dimensional superlattice is an insulator in the presence of even small roughness. In three-dimensional systems, however, the superlattice exhibits a metal-insulator transition with a well-defined mobility edge located at an energy E c that we compute numerically. For three-dimensional superlattice,... 

We study the metal-insulator transition in one-dimensional Anderson binary alloy with long-range disordered hopping integrals and on-site energies using the transfer matrix method. In this model, the on-site energies and hopping integrals are distributed randomly with long-range correlations characterized by power spectrum of the type S(k)∝1/k(2α-1), with different exponents αε and αt, respectively. We determine the critical value of long-range correlation exponent of hopping integral in the presence of only off-diagonal disorder in which the transition from localized to extended states occurs in thermodynamic limit. When both of the on-site energies and hopping... 

The electronic transmission and conductance of a gapped graphene superlattice were calculated by means of the transfer-matrix method. The system that we study consists of a sequence of electron-doped graphene as wells and hole-doped graphene as barriers. We show that the transmission probability approaches unity at some critical value of the gap. We also find that there is a domain around the critical gap value for which the conductance of the system attains its maximum value  

We study the electronic properties of disordered GaAs- Alx Ga1-x As semiconductor superlattices with structural long-range correlations. The system consists of quantum barriers and wells with different thicknesses and heights which fluctuate around their mean values randomly, following a long-range correlated pattern of fractal type characterized by a power spectrum of the type S (k) 1 k (2α-1), where the exponent α quantifies the strength of the long-range correlations. For a given system size, we find a critical value of the exponent α (αc) for which a metal-insulator transition appears: for α< αc all the states are localized, and for α> αc, we find a continuous band of extended states. We... 

We study the metal-insulator transition of the one-dimensional diagonal Anderson ternary model with long range correlated disorder. The starting point of the model corresponds to a ternary alloy (i.e. with three possible on-site energies), and shows a metal-insulator transition when the random distribution of site energies is assumed to have a power spectrum S(k) ∝ 1/k (2α-1). In this paper, we define a purity parameter for the ternary alloy which adjusts the occupancy probability of site potentials, and for any given α we calculate the critical purity parameter for which extended states are obtained. In this way, we show that the ternary alloy requires weaker correlations than the binary... 

In this paper, the influence of the excitation angle on the Endurance Time (TCT) analysis of skewed slab-on-girdcr bridges is studied. The excitation of the structure due to the critical angle produces maximum seismic responses that are sometimes significantly higher than the average. The modeled bridges are of slab-on-girder type that are typically used as highway bridges. The bridge models have skew angles of 0, 15, 30, 45, and CO degrees. The ET excitations exerted on structures cover a broad range of hazard levels. The results provide some insight with regard to choosing multiple excitation angles so as to balance computational costs and retain acceptable accuracy for practical design... 

Molybdenum(VI)–oxodiperoxo complex containing an oxazine ligand, ([MoO(O2)2(phox)], phox: 2-(2′-hydroxyphenyl)-5,6-dihydro-1,3-oxazine) was conveniently synthesized and immobilized onto chloro-functionalized mesoporous silica SBA-15 by covalent bonding between the chloropropyl group on the internal surface of the pores and the nitrogen atom of oxazine ligand yielding [MoO(O2)2(phox)]/SBA-15. The resulting material was characterized by FT-IR, TGA, XRD, SEM, TEM, EDX, ICP-AES, BET and UV–vis spectroscopy. The heterogeneous catalyst [MoO(O2)2(phox)]/SBA-15 was employed in the epoxidation of alkenes, exhibiting high catalytic performance and selectivity for epoxide similar to that of homogeneous... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared