Loading...
Search for:
etesami--e
0.083 seconds
Total 2568 records
Relations between belief propagation on erasure and symmetric channels
, Article Proceedings - 2004 IEEE International Symposium on Information Theory, Chicago, IL, 27 June 2004 through 2 July 2004 ; 2004 , Pages 209- ; 21578097 (ISSN) ; Sharif University of Technology
2004
Abstract
We give an upper bound on the performance of the belief propagation algorithm in decoding a code over a binary-input output-symmetric channel in terms of the decoding threshold of the code over the erasure channel. Using this upper bound, we obtain the overhead of fountain codes on the erasure channel, provided that they are capacity-achieving on a symmetric channel. The upper bound is similar to a lower bound proved by Khandekar. The lower bound will be used to bound from above the reception overhead of fountain codes on symmetric channels
Maximal rank correlation
, Article IEEE Communications Letters ; Volume 20, Issue 1 , 2016 , Pages 117-120 ; 10897798 (ISSN) ; Gohari, A ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2016
Abstract
Based on the notion of maximal correlation, we introduce a new measure of correlation between two different rankings of the same group of items. Our measure captures various types of correlation detected in previous measures of rank correlation like the Spearman correlation and the Kendall tau correlation. We show that the maximal rank correlation satisfies the data processing and tensorization properties (that make ordinary maximal correlation applicable to problems in information theory). Furthermore, MRC is shown to be intimately related to the FKG inequality. Finally, we pose the problem of the complexity of the computation of this new measure. We make partial progress by giving a simple...
Performance Evaluation of Cloud Services Considering Live Virtual Machine Migration
, M.Sc. Thesis Sharif University of Technology ; Movaghar, Ali (Supervisor)
Abstract
The proliferation of cloud services and drastic growing of IaaS data centers,encourage providers to adopt more intelligent approaches to save more energy and as a result, save more money. Today’s novel techniques such as virtualization and live virtual machine migration, provide effective solutions to service providers to fulfill this need. However, investigate the effect of different resource management and virtual machine migration approaches in virtualized data centers, require great efforts. Therefore, in this research work, we propose a model based on Colored Petri Nets to investigate the effect of live virtual machine migration in cloud data centers. Our proposed model is able to...
Power-aware performance analysis of self-adaptive resource management in IaaS clouds
, Article Future Generation Computer Systems ; Volume 86 , 2018 , Pages 134-144 ; 0167739X (ISSN) ; Entezari Maleki, R ; Etesami, S. E ; Egger, B ; Ardagna, D ; Movaghar, A ; Sharif University of Technology
Elsevier B.V
2018
Abstract
In this paper, Stochastic Activity Networks (SANs) are used to model and evaluate the performance and power consumption of an Infrastructure-as-a-Service (IaaS) cloud. The proposed SAN model is scalable and flexible, yet encompasses some details of an IaaS cloud, such as Virtual Machine (VM) provisioning, VM multiplexing, and failure/repair behavior of VMs. Using the proposed SAN, a power-aware self-adaptive resource management scheme is presented for IaaS clouds that automatically adjusts the number of powered-on Physical Machines (PMs) regarding variable workloads in different time intervals. The proposed scheme respects user-oriented metrics by avoiding Service Level Agreement (SLA)...
Modeling and evaluation of dispatching policies in IaaS cloud data centers using SANs
, Article Sustainable Computing: Informatics and Systems ; Volume 33 , 2022 ; 22105379 (ISSN) ; Entezari Maleki, R ; Etesami, S. E ; Egger, B ; Sousa, L ; Movaghar, A ; Sharif University of Technology
Elsevier Inc
2022
Abstract
Infrastructure-as-a-Service (IaaS) clouds not only have to meet business requirements but also need to consider other important metrics that influence the quality of service, such as performance, availability, and power consumption. In this paper, we present a Stochastic Activity Network (SAN) based analytical approach that simultaneously computes these metrics under a given load for IaaS cloud data centers. The model's high-level abstraction of IaaS clouds allows us to evaluate different resource management strategies and features, including cloud federation and dispatching policies. In a first step, we model a single rack including its autonomous local manager responsible for scheduling...
Raptor codes on symmetric channels
, Article Proceedings - 2004 IEEE International Symposium on Information Theory, Chicago, IL, 27 June 2004 through 2 July 2004 ; 2004 , Pages 38- ; 21578097 (ISSN) ; Molkaraie, M ; Shokrollahi, A ; Sharif University of Technology
2004
Abstract
We extend the construction and analysis of Raptor codes originally designed in [1] for the erasure channel to general symmetric channels. We explicitly calculate the asymptotic fraction of output nodes of degree one and two for capacity-achieving Raptor codes, and discuss techniques to optimize the output degree distribution
Investigation of Buckling Phenomenon in Fiber Production Using Direct Electrospinning
, M.Sc. Thesis Sharif University of Technology ; Iraji Zad, Azam (Supervisor)
Abstract
Duringfalling a viscous liquid freely on a surface, the viscous thread bends due to a phenomenon called buckling. The gravity force in this process could be replaced by an electric force in electrospinning process. In the present thesis, we have designed a number of setups in order to investigate the buckling phenomenon in two categories of helical and non-helical buckling by using direct electrospinning process. By making the collector moving, the electrospun fibers show several shapes including coiling, meander, figure of 8 shape, etc. There are three effective forces acting in this process which are viscous force, electric force and inertia. Also there are three distinct regimes defined...
Theoretical comparative assessment of single- and two-phase models for natural convection heat transfer of Fe3O4/ethylene glycol nanofluid in the presence of electric field
, Article Journal of Thermal Analysis and Calorimetry ; 2020 ; Tavakoli, S ; Pishvaie, M. R ; Sharif University of Technology
Springer Netherlands
2020
Abstract
Natural convective heat transfer of Fe3O4/ethylene glycol nanofluids around the platinum wire as a heater in the absence and presence of the high electric field was investigated, numerically. The control volume finite element method was employed for the numerical simulation. Effects of the flow model, the volume fraction of nanoparticles, Rayleigh number, and the electric field intensity on the natural heat transfer coefficient (NHTC) of nanofluid were studied. Simulation results of single-phase and two-phase flow models showed that the two-phase model could better predict experimental data than the single-phase model due to take into account the velocity of each phase in the mixture. The...
Theoretical comparative assessment of single- and two-phase models for natural convection heat transfer of Fe3O4/ethylene glycol nanofluid in the presence of electric field
, Article Journal of Thermal Analysis and Calorimetry ; Volume 146, Issue 2 , 2021 , Pages 981-992 ; 13886150 (ISSN) ; Tavakoli, S ; Pishvaie, M. R ; Sharif University of Technology
Springer Science and Business Media B.V
2021
Abstract
Natural convective heat transfer of Fe3O4/ethylene glycol nanofluids around the platinum wire as a heater in the absence and presence of the high electric field was investigated, numerically. The control volume finite element method was employed for the numerical simulation. Effects of the flow model, the volume fraction of nanoparticles, Rayleigh number, and the electric field intensity on the natural heat transfer coefficient (NHTC) of nanofluid were studied. Simulation results of single-phase and two-phase flow models showed that the two-phase model could better predict experimental data than the single-phase model due to take into account the velocity of each phase in the mixture. The...
Design and fabrication of a floating social robot: CeB the social blimp
, Article 13th International Conference on Social Robotics, ICSR 2021, 10 November 2021 through 13 November 2021 ; Volume 13086 LNAI , 2021 , Pages 660-670 ; 03029743 (ISSN) ; 9783030905248 (ISBN) ; Nemati, A ; Meghdari, A. F ; Ge, S. S ; Taheri, A ; Sharif University of Technology
Springer Science and Business Media Deutschland GmbH
2021
Abstract
Robotic blimps have a wide range of applications, such as monitoring activities in their surroundings, advertising, and performing on stages. They also have remarkable capacities to be used as a social robot. In this research, a manually operated social robotic blimp has been developed intending to interact with children as a social agent and attract adults’ attention as an entertainer in indoor public environments. Since the appearance of a social robot has a significant impact on its acceptance, first, we acquired opinions of several participants on the shape of a desired floating robot. The results revealed that a simple spherical structure adequately draws people’s attention. After...
Dose-dependent effects of nanoscale graphene oxide on reproduction capability of mammals
, Article Carbon ; Volume 95 , December , 2015 , Pages 309-317 ; 00086223 (ISSN) ; Ghaderi, E ; Hashemi, E ; Akbari, E ; Sharif University of Technology
Elsevier Ltd
2015
Abstract
In vivo dose-dependent effects of nanoscale graphene oxide (NGO) sheets on reproduction capability of Balb/C mice were investigated. Biodistribution study of the NGO sheets (intravenously injected into male mice at dose of ∼2000 μg/mL or 4 mg/kg of body weight) showed a high graphene uptake in testis. Hence, in vivo effects of the NGO sheets on important characteristics of spermatozoa (including their viability, morphology, kinetics, DNA damage and chromosomal aberration) were evaluated. Significant in vivo effects was found at the injected concentrations ≥200 μg/mL after (e.g., ∼45% reduction in sperm viability and motility at 2000 μg/mL). Observation of remarkable DNA fragmentations and...
Accelerated differentiation of neural stem cells into neurons on ginseng-reduced graphene oxide sheets
, Article Carbon ; Volume 66 , January , 2014 , Pages 395-406 ; Ghaderi, E ; Abouei, E ; Hatamie, S ; Ghasemi, E ; Sharif University of Technology
2014
Abstract
Asian red ginseng was used for green reduction of chemically exfoliated graphene oxide (GO) into reduced graphene oxide (rGO). The reduction level and electrical conductivity of the ginseng-rGO sheets were comparable to those of hydrazine-rGO ones. Reduction by ginseng resulted in repairing the sp 2 graphitic structure of the rGO, while hydrazine-rGO showed more defects and/or smaller aromatic domains. The ginseng-rGO sheets presented a better stability against aggregation than the hydrazine-rGO ones in an aqueous suspension. Whilst the hydrophobic hydrazine-rGO films exhibited no toxicity against human neural stem cells (hNSCs), the hydrophilic GO and ginseng-rGO films (as more...
Contested framings and policy controversies: Analysing biosafety policy-making in Iran
, Article Science and Public Policy ; Volume 40, Issue 5 , 2013 , Pages 616-627 ; 03023427 (ISSN) ; Millstone, E ; Sharif University of Technology
2013
Abstract
Vigorous debates have taken place within and between many countries about regulatory policy regimes covering the assessment and approval of genetically modified (GM) crops. In Iran, a very vigorous and hotly contested policy debate concerning legislation covering GM crops occurred between 2004 and 2009, but it was confined within government circles with almost no public discussion. This paper analyses the Iranian policy-making process in the period 2006-9. It explains how and why a stalemate arose in disputes between ministries and departments. The chosen analytical framework draws mainly on the regulation of technological risks and the analysis of public policy-making. It deploys the...
On the possible volumes of μ-way latin trades
, Article Aequationes Mathematicae ; Volume 63, Issue 3 , 2002 , Pages 303-320 ; 00019054 (ISSN) ; Billington, E. J ; Bryant, D. E ; Mahmoodian, E. S ; Sharif University of Technology
Birkhauser Verlag Basel
2002
Abstract
A μ-way latin trade of volume s is a set of μ partial latin rectangles (of inconsequential size) containing exactly the same s filled cells, such that if cell (i, j) is filled, it contains a different entry in each of the μ partial latin rectangles, and such that row i in each of the μ partial latin rectangles contains, set-wise, the same symbols and column j, likewise. In this paper we show that all μ-way latin trades with sufficiently large volumes exist, and state some theorems on the non-existence of μ-way latin trades of certain volumes. We also find the set of possible volumes (that is, the volume spectrum) of μ-way latin trades for μ = 4 and 5. (The case μ = 2 was dealt with by Fu,...
The three-way intersection problem for latin squares
, Article Discrete Mathematics ; Volume 243, Issue 1-3 , 2002 , Pages 1-19 ; 0012365X (ISSN) ; Billington, E. J ; Bryant, D. E ; Mahmoodian, E. S ; Sharif University of Technology
2002
Abstract
The set of integers k for which there exist three latin squares of order n having precisely k cells identical, with their remaining n2 -k cells different in all three latin squares, denoted by I3[n], is determined here for all orders n. In particular, it is shown that I3[n] = {0,.,n2 -15}U [n2 - 12,n2-9,n2], for n ≫8. ©2002 Eisevier Science B.V. All rights reserved
Integration of spatial fuzzy clustering with level set for segmentation of 2-D angiogram
, Article IECBES 2014, Conference Proceedings - 2014 IEEE Conference on Biomedical Engineering and Sciences: "Miri, Where Engineering in Medicine and Biology and Humanity Meet", 8 December 2014 through 10 December 2014 ; December , 2015 , Pages 309-314 ; 9781479940844 (ISBN) ; Zahedi, E ; Fatemizadeh, E ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2015
Abstract
Coronary angiography is a vital instrument to detect the prevailing of vascular diseases, and accurate vascular segmentation acts a crucial role for proper quantitative analysis of the vascular tree morphological features. Level set methods are popular for segmenting the coronary arteries, but their performance is related to suitable start-up and optimum setting of regulating parameters, essentially done manually. This research presents a novel fuzzy level set procedure with the objective of segmentation of the coronary artery tree in 2-D X-ray angiography as automatically. It is clever to clearly develop from the early segmentation with spatial fuzzy grouping. The adjusting parameters of...
Deep relative attributes
, Article 13th Asian Conference on Computer Vision, ACCV 2016, 20 November 2016 through 24 November 2016 ; Volume 10115 LNCS , 2017 , Pages 118-133 ; 03029743 (ISSN); 9783319541921 (ISBN) ; Noury, E ; Adeli, E ; Sharif University of Technology
Springer Verlag
2017
Abstract
Visual attributes are great means of describing images or scenes, in a way both humans and computers understand. In order to establish a correspondence between images and to be able to compare the strength of each property between images, relative attributes were introduced. However, since their introduction, hand-crafted and engineered features were used to learn increasingly complex models for the problem of relative attributes. This limits the applicability of those methods for more realistic cases. We introduce a deep neural network architecture for the task of relative attribute prediction. A convolutional neural network (ConvNet) is adopted to learn the features by including an...
A public code for astrometric microlensing with contour integration
, Article Monthly Notices of the Royal Astronomical Society ; Volume 505, Issue 1 , 2021 , Pages 126-135 ; 00358711 (ISSN) ; Khalouei, E ; Bachelet, E ; Sharif University of Technology
Oxford University Press
2021
Abstract
We present the first public code for the calculation of the astrometric centroid shift occurring during microlensing events. The computation is based on the contour integration scheme and covers single and binary lensing of finite sources with arbitrary limb darkening profiles. This allows for general detailed investigations of the impact of finite source size in astrometric binary microlensing. The new code is embedded in version 3.0 of vbbinarylensing, which offers a powerful computational tool for extensive studies of microlensing data from current surveys and future space missions. © 2021 The Author(s) Published by Oxford University Press on behalf of Royal Astronomical Society
Toward electrically tunable, lithography-free, ultra-thin color filters covering the whole visible spectrum
, Article Scientific Reports ; Volume 8, Issue 1 , 2018 ; 20452322 (ISSN) ; Serebryannikov, A. E ; Khavasi, A ; Vandenbosch, G. A. E ; Ozbay, E ; Sharif University of Technology
Nature Publishing Group
2018
Abstract
The possibility of real-time tuning of optical devices has attracted a lot of interest over the last decade. At the same time, coming up with simple lithography-free structures has always been a challenge in the design of large-area compatible devices. In this work, we present the concept and the sample design of an electrically tunable, lithography-free, ultra-thin transmission-mode color filter, the spectrum of which continuously covers the whole visible region. A simple Metal-Insulator-Metal (MIM) cavity configuration is used. It is shown that using the electro-optic dielectric material of 4-dimethyl-amino-N-methyl-4-stilbazoliumtosylate (DAST) as the dielectric layer in this...
A novel method for modeling the magnetizing yoke
, Article Electromagnetics ; Volume 30, Issue 3 , 2010 , Pages 297-308 ; 02726343 (ISSN) ; Norouzi, E
2010
Abstract
Magnetic flux leakage is the most widely used method for oil and gas pipeline non destructive testing. The saturation level of the sample under test has a significant effect on its efficiency; therefore, the magnetizing yoke requires an elaborate design. The finite element method is the conventional approach used for this purpose, but it is very time consuming. In this article, a neuro-fuzzy method is presented to model the behavior of the magnetizing yoke. Modeling a few different designs with the finite element method and using the results for training the neuro-fuzzy model eradicates the necessity of modeling a huge number of designs with the finite element method. The acquired...