Sharif Digital Repository

Fuel management in PWR nuclear reactors is comprised of a collection of principles and practices required for the planning, scheduling, refueling, and safe operation of nuclear power plants to minimize the total plant and system energy costs to the extent possible. Despite remarkable advancements in optimization procedures, inherent complexities in nuclear reactor structure and strong inter-dependency among the fundamental parameters of the core make it necessary to evaluate the most efficient arrangement of the core. Several patterns have been presented so far to determine the best configuration of fuels in the reactor core by emphasis on minimizing the local power peaking factor (Pq). In... 

The concentration and temperature behaviors of the self-diffusion coefficient were analyzed in glycerol-water and methanol-water solutions using Diffusion-Ordered Spectroscopy (DOSY) experiment. Our results indicate that the self-diffusion coefficient dips with increasing concentration and decreasing temperature. The concentration behavior shows that there is hydrogen bond interaction between water and alcohol, which declines the self-diffusion coefficients of both in the aqueous binary mixtures. The self-diffusion activation energies were estimated 13.6, 29.4, and 32.8 (kJ/mol) for methanol and 24.8, 25.5, and 27.6 (kJ/mol) for water in the methanol-water solutions with 0.03, 0.10, and 0.20... 

We study the problem of maximizing constrained non-monotone submodular functions and provide approximation algorithms that improve existing algorithms in terms of either the approximation factor or simplicity. Different constraints that we study are exact cardinality and multiple knapsack constraints for which we achieve (0.25-)-factor algorithms. We also show, as our main contribution, how to use the continuous greedy process for non-monotone functions and, as a result, obtain a 0.13-factor approximation algorithm for maximization over any solvable down-monotone polytope  

Magnetite nanoparticles with an average particle size of 28.8 nm were synthesized, coated with oleic acid, and characterized using various techniques such as DLS, FT-IR, SEM, XRD, VSM, and UV-Vis analysis. A nanofluid consisting of synthesized nanoparticles and 5 wt % acetic acid in toluene as the dispersed phase was prepared and used in the chemical test system, Toluene-Acetic Acid-Water, for the single drop extraction in the presence and absence of an external oscillating magnetic field. Influences of various operating and design parameters such as nanoparticle concentration, drop diameter, and the applied current and frequency on the overall mass-transfer coefficients for the... 

Gas sparging and back-flushing treatments were compared as a means to tackle the problem of fouling in yeast microfiltration. Based on the feed and membrane characteristics, it was shown that either of these techniques could be superior to the other in order to overcome the problem. At more concentrated feed streams the main cause of flux decline was cake formation. In this condition gas sparging showed greater efficiency in flux enhancement. On the other hand at lower feed concentration the relative importance of internal fouling due to pore blockage, increased. In this case back-flushing was more effective. © 2007  

Originally, the application of nano zero valent iron/nickel (nZVI/Ni) particles for nitrate removal in porous media was studied. nZVI/Ni was prepared and employed in batch and continuous modes. Based on batch experiments, the reaction kinetics was consistent with the adsorption model by the order of 1-1.5. The variation of the kinetics order depends on pH and nickel content. So that highest reactivity was observed for nZVI with 10% of Ni at pH ≤ 3. Nitrate remediation in a continuous system was mostly influenced by seepage velocity, quantity and freshness of nZVI/Ni and particle size of porous media. In a batch mode, the maximum nitrate removal was 99% while in a continuous mode it did not... 

Originally, application of nano zero valent iron (nZVI) particles for the removal of lead (Pb2+) in porous media was studied. At first, stabilized nZVI (S-nZVI) was prepared and characterized, then used in batch and continuous systems. Based on the batch experiments, corresponding reaction kinetics well fitted with the pseudo-first-order adsorption model, and reaction rate ranged from 0.01 to 0.04 g/mg/min depend on solution pH and the molar ratio between Fe and Pb. In batch tests, optimal condition with more than 90% removal efficiency at 60 min was observed at a pH range of 4 to 6 and Fe/Pb ratio more than 2.5. Continuous experiments exposed that Pb2+ remediation was as well influenced by... 

In this work, forced-convection heat transfer of magnetic-sensitive nanofluids has been investigated in the presence of rotating magnetic field. In this regard, the laminar, Newtonian, incompressible, and two-dimensional (2D) fluid flow in a horizontal duct subject to constant wall temperature boundary condition was modeled. Moreover, the fluid was supposed to be non-electrical conductive and the magnetic field source comprised of two time varying components perpendicular to each other. Influences of magnetic field intensity and frequency, inlet fluid velocity, and spin viscosity on the forced-convection heat transfer of the magnetic nanofluids were investigated. It was found that the...