Sharif Digital Repository

A prey-predator fishery model with stage structure for prey is discusing in this thises. The adult preyand predator populations are harvested in the proposed system. The dynamic behavior of the model system is discussed. It is observed that singularity induced bifurcation phenomena is appeared when variation of the economic interest of harvesting is taken into account. We have incorporated state feedback controller to stabilize the model system in the case of positive economic interest. Fishing effort used to harvest the adult prey and predator population is used as a control to develop a dynamic framework to investigate the optimal utilization of the resource. Simulation results show that the... 

The chemical vapor deposition (CVD) of graphene from methane on a copper substrate is the most promising method for production of large-area graphene films. There have been long-standing challenges in this field such as controlling the graphene coverage, film quality, the number of layers, and the nucleation density of graphene domain. These challenges can be overcome by developing a fundamental understanding of the graphene growth process. The main aim of this study is to control nucleation density of graphene domains. Chemical vapor deposition (CVD) graphene is polycrystalline, and grain boundaries in graphene film have been identified to degrade the properties of graphene as a membrane... 

Different catalysts have been proposed for CO oxidation reaction and still many researches are performed to obtain a catalyst with high activity and stability. In this study, MOFs of CuBTC, MIL-101(Cr), and NH2-MIL-101(Cr) and active metal of Pd have been selected and their performances have been investigated in CO oxidation reaction. MOFs have been synthesized by hydrothermal method. Pd loading has been performed by impregnation method in various pH and in aqeous palladium nitrate solution and palladium nitrate solution in nitric acid. To reveal the effect of the nature of noble metal, activity of 1% Pt/MIL has been investigated. Amine-functionalized MIL-101(Cr) has been synthesized by... 

Final control elements usually have nonlinear dynamics which affect the stability of the closed- loop system. Four most common types of these nonlinearities are dead-zone, backlash, hysteresis and saturation. Because most of final control elements especially in chemical processes are subjected to saturation constraint and also due to lack of generaland practical control scheme to handle this limitation, our concentration will be focused on saturation nonlinearity. In this work, based on sliding mode control strategy, a control scheme for multi-input multi-state systems in the presence of input saturation is presented. Some numerical simulations are carried out to show the effectiveness of... 

Nowadays, one of the most basic human problem is how to manage energy resources for sustainable development and how to deal with problems caused by growing energy consumption. Various scenarios are being discussd that the most important of them can be considered research on finding alternative energy sources that are renewable and do not have common pollution. Thus, according to researches carried out until now, using sources such as wind, water, solar biomass, etc. have been proposed. However, due to problems in the development of each of these sources, biomass as the primary option has been introduced. because biomass has several subsidiaries, research shows microalgaes (as a subset) are... 

Hydrogen gas is considered as a clean fuel and energy carrier that its storage for future uses is a challenging issue. One of the methods to store it, is adsorption on a group of adsorbents called metal-organic frameworks. In this research, one of these frameworks called ZIF-8, has been selected to study hydrogen storage capability. To evaluate the effect of having two metals, a mixture of two metals was used in the synthesis process. To characterize the structure of the synthesized adsorbents, X-ray powder diffraction (XRD),adsorption and desorption of nitrogen at temperature of 77 K, Field Emission Scanning Electron Microscopy (FESEM), energy-dispersive X-ray Spectroscopy (EDS) and... 

The aim of this dissertation is to investigate the extraction of calcium ions using an emulsion liquid membrane (ELM) with an isotopic perspective. Considering the importance of ion extraction as a preliminary step to isotope separation, the factors affecting the extraction of Ca(II) ions in the ELM process were investigated and optimization of the process was performed in this study. Dicyclohexano-18-crown-6 (DC18C6) was used as the carrier due to isotopic considerations. However, its extractability for calcium ions is limited. In order to address this issue, it is possible to introduce an organic acid, specifically di-(2-ethylhexyl) phosphoric acid (D2EHPA), into the membrane phase. This... 

Thin film graphene oxide(GO) membranes have been promising potential for gas purification due to thin lamellar microstructure, stable a few atom thick layers and very short intersheet distances. In this research, the nanoporous graphene oxide membranes have been prepared by vacuum and pressurized ultrafiltration on the modified polyacrylonitryle(mPAN) sublayer for helium separation from Nitrogen and carbon dioxide gas mixture. The separation performance of synthesized GO membrane was controlled by varying parameters such as concentration of stabilized aqueous GO solution, pores size range of support and its surface properties, centrifuge time, applied pressure after synthesis, humidity,... 

Hydrothermal supercritical method is one of the most suitable methods for metal oxide nano powder, ceramics and mineral catalyst synthesis. Metal oxides nanopowder in its pure or mixed form has wide potential application as chemical industrial catalyst, hot Superconductors, magnetic material, gas sensors and car catalyst convertors. One of the most important metal oxides aspects of application is uranium oxide as nuclear reactor fuel is used. In addition, UO2 is selective catalyst for converting methane to methanol process and Decomposition of organic Chlorine material. In Supercritical hydrothermal method done in high pressure reactor with critical to fluid, is new method for the... 

Intelligent control or management of well or reservoir is a method which is used in order to optimize the production for increasing recovery factor so that the minimum damage or reduction of pressure occurs during production lifetime. Azar oilfield has 17 wells and the production from this field isn't started. Thereupon designing a suitable well completion model and a control algorithm to optimize the production for the first two years of production is necessary and indispensable. For this purpose, by collecting basic information and their analysis (for example pressure, temperature, production rate, the type and amount of produced fluids), designing of downhole installations and modeling... 

Detetrmination of particulate matter (PM), as one of the most important pollutants in big cities, requires extensive system of monitoring stations. Remotely sensed atmospheric data due to their large spatial coverage and frequent observations are emerging as an important addition to conventional ground based atmospheric monitoring. In this regards this study presents an approach to analyze the relationship between PM10 (particles with aerodynamic diameter less than 10 μm) and the satellite product of aresol optical depth (AOD), which is the measurement of the extinction of light due to interferences with particulate matter. In the current study AOD is observed by Moderate Resolution Imaging... 

Superalloys are widely used in aerospace and power industries due to the good performance at high temperatures for examples gas turbines, steam turbines and aircraft components. In addition to the turbines cobalt-base superalloys are used in medical implants such as knee and hip joints. The main strengths of the superalloys are heat-resistant, retaining their high mechanical and chemical properties at high temperatures, high melting temperatures, high corrosion resistance, resistance to thermal fatigue, thermal shock, creep, and erosion. Because of difficult to machine properties of superalloys, grinding is one of the effective methods for machining superalloys. The surface integrity of the... 

Drilling super alloys with a good hole quality and acceptable surface finish is a constant challenge in modern industries dealing with such materials. Ultrasonic assisted drilling is a modern and nonconventional method of drilling which has attracted many researchers attention recently. In this study deep drilling on Inconel 738 LC is done using ultrasonic assisted drilling technique and the results are compared with those of Electro Discharge Machininng or EDM method. The results show that Ultrasonic Assisted Drilling or UAD is an appropriate alternative for EDM of Inconel. The whole process time is decrease dimensional accuracy is improved and surface roughness is decreased significantly.... 

Due to popularity of mobile wireless devices, security of mobile ad hoc networks (MANETs) being more important than before. Traditional key management schemes based on symmetric key cryptography are became ineffective because of dynamic and infrastructureless nature of these networks.Recent studies are mainly based on traditional public key cryptography schemes and ID-based cryptography schemes. On the other hand, Contributory schemes seem suitable for MANETs because of their inherent self-organize property. Key update and Key revocation are the fundamental issues of key management schemes in mobile ad hoc networks. Certificateless public key cryptography, in addition to solve those issues,... 

International trade arrangements have been considerably developed in recent decadees. Especially, one can note the role of these factors in economic development and improvement of life standards in member countries. In the meantime, Economic Cooperation Organization (ECO) was established in 1985, by Iran, Pakistan and Turkey and then extended by seven other countries: Afghanistan, Azerbaijan, Kazakhstan, Kyrgyzstan, Tajikistan, Turkmenistan and Uzbekistan. Improving economic development and intra-group trade of member countries is one of the main objectives for the group. The purpose of this research is to estimate the ex-post effects of ECO on the intra-group trade of member countries.... 

Establishing an efficient free trade agreement (FTA) requires some conditions in both trading partners. The median voter approach insists on the direction of general interests (identified by the utility of a median voter) to explain how two countries may agree to sign an FTA. At the other side, lobbying approach emphasizes on the role of interest groups (groups with a large influence on the public decisions) in forming FTAs. Taking into account the theoretically based and empirically robust foundation of the median voter approach, we rely on it to investigate the major determinants of free trade agreements in the case of ECO countries besides all their main trade partners. The database...