Sharif Digital Repository

In this study, a novel idea of storing the latent heat of condensing vapor in solar stills by means of phase change materials (PCMs) as a thermal storage is experimentally investigated. During the daytime, the generated water vapor by the solar energy, is conducted to an external condenser filled with PCM to be condensed. The wasted latent heat is absorbed by PCM and thereby stored. It is worth noting that there is no direct contact between the saline water and the PCM, therefore, the solar energy is not directly stored in the PCM. In the evening, the energy stored in the PCM is transferred as heat to the saline water by heat pipes and enables the desalination process to continue. Several... 

In this study, the theoretical investigation of a novel heat pump assisted humidification-dehumidification desalination system has been carried out. The conventional dehumidifier of the humidification-dehumidification system was removed and the evaporator of the heat pump was utilized for direct dehumidification of air. Besides, the heat pump condenser was used as the saline water heater of the humidification-dehumidification cycle. First, the sizes of the components were calculated at design conditions for fixed input operational conditions namely the ambient air temperature, relative humidity, and inlet saline water temperature. However, the input operating conditions vary at off-design... 

A new design for heat pump integrated humidification-dehumidification (HDH-HP) desalination cycles was proposed in the current experimental study. An evaporative condenser was designed and fabricated instead of a separate humidifier, heater, and air/water-cooled condensers find in previous HDH-HP systems. Meanwhile, the air dehumidification process in this work directly occurred inside the heat pump evaporator. The effect of several operating parameters such as ambient wet-bulb temperature, spraying saline water and airflow rates, compressor speed, superheat, and evaporator saturation temperature control modes of the electronic expansion valve (EEV) on freshwater production and GOR were... 

Water and energy supply are two of the key issues human beings must address to attain sustainable development. Humidification-dehumidification technology has been proven to be a cost-effective approach to fulfill the freshwater demand. Particular attention has been given to coupling the humidification-dehumidification cycles with refrigeration, power and other desalination technologies with the aim of enhancing the performance of the combined cycle as well as increasing the amount of produced freshwater, cooling effect, power, etc. This paper provides a comprehensive review of the state-of-the-art investigations in terms of humidification-dehumidification technologies and their integration... 

A hybrid HDH desalination system integrated with a heat pump was experimentally studied. In this system, heat pump's heating was used to raise the temperature of the air entering the humidifier and its cooling effect was used for dehumidification of humid air and freshwater production. In other words, heat pump's condenser works as the heater of the HDH cycle and its evaporator works as the coolant for the dehumidifier of HDH cycle. The effects of different parameters such as mass flow rate of inlet saline water (relative humidity of the air passing the dehumidification section), volume flow rate of the air passing the dehumidification section and ambient air temperature on freshwater... 

In this study, a novel Magnetically Variable Conductance Thermosyphon Heat Pipe (MVCTHP) was investigated experimentally. The possibility of deactivating a portion of evaporator length and subsequently altering heat pipe resistance by positioning a steel ball inside the evaporator and moving it by an external magnet was studied. The effect of various ball positions in the evaporator and inclination angles on heat pipe performance was studied at 30, 60, 90 and 120 W. The results indicated that at a given heat input, moving the ball away from the beginning of the evaporator of heat pipe increases its thermal resistance. Furthermore, by increasing heat input, MVCTHP performance for various ball... 

In this article, a novel solar still which is equipped with thermoelectric modules to utilize the heat of vapor condensation is experimentally investigated. The use of thermoelectric modules as devices for generating electricity from the temperature difference between two environments (hot vapor steam and cold ambient air) as well as taking outstanding advantages of evacuated tubes as collectors with high performances in adverse climatic conditions, led to utilizing of the energy dissipated due to vapor condensation and a considerable increase in the performance of the system. The effect of using the generated electricity to operate a small propeller fan for inducing forced convection was... 

In common solar stills, a portion of the produced vapor undesirably condenses on the sidewalls and runs down to be mixed with saline water in the basin. This results in lower distillate output of the system. The aim of this study was to improve the condensation process of a solar still without complicating its structure to collect the water condensed on sidewalls. The proposed solar still was made of two containers nested one inside the other such that the smaller container, containing saline water, fitted easily into the larger container. There was a thin gap between the two in which condensed liquid on sidewalls, ran down and was collected from the bottom of the larger container. The... 

In this study, the application of data-driven methods for performance prediction of a heat pump assisted humidification-dehumidification (HDH-HP) desalination system was investigated for the first time. Although HDH-HP desalination systems have been widely studied both theoretically and experimentally, the application of data-driven models as a powerful predictive tool has not yet been investigated in these systems. To fill this gap, three data-driven models (MLPANN, RBFANN, and ANFIS) were applied using 180 experimental samples. The gain output ratio (GOR), heat transfer rates of the evaporator Q̇e, and evaporative condenser Q̇c, were considered as outputs. The results indicate that the... 

Low-temperature geothermal heat sources have the highest share of geothermal energy in the world. Utilization of these heat sources for energy and freshwater generation can play an important role in meeting energy and freshwater demands. To do so, this study aims to propose a novel trigeneration cycle powered by low-temperature geothermal sources. The proposed system, which is an integration of Kalina and humidification-dehumidification (HDH) cycles, is used for the generation of electricity, heating, and freshwater. For the Kalina cycle, an evaporative condenser is used. It also acts as a humidifier and heater of the humidification-dehumidification desalination cycle, resulting in a...