Sharif Digital Repository

By creating constant volume combustion, the rotating detonation chamber increases efficiency compared to conventional constant pressure chambers. The RDC is smaller and mechanically more straightforward than the other detonation chambers, such as the pulse chamber. In the current research, an RDC with an outer diameter of 76 mm and an inner diameter of 64 mm, using hydrogen and air as fuel and oxidizer, has been successfully tested and data collected in the laboratory. Data acquisition has been made by high-frequency and pressure measurement facilities. In the following, the chamber has been optimized and improved by applying parametric studies (equivalence ratio, mass flow rate, channel... 

Due to the large portion of organic fraction of municipal solid wastes in Iran, the needing for stabilization and treatment of this waste is obvious. An appropriate method for treatment of these wastes is anaerobic digestion. By skimming through open literature which are investigated about anaerobic bioreactors, declared that despite the benefits of thermophilic bioreactors over mesophilic ones, (more destruction of pathogens, more removal of volatile solids, more production of biogas and greater resilient to organic loading rate shocks) but because of more difficulties in controlling of thermophilic bioreactors, most studies have been done in mesophilic state. This motivated us to a deeper... 

Among the proposals for new physics, Supersymmetry is the most popular to gradually appear at a yet unreached center-of-mass energy at the Large Hadron Collider (LHC). However, that doesn’t seem very likely. This thesis represents a search for any evidence of a minimal supergravity inspired scenario (mSUGRA) of R-parity conserving supersymmetry at the Compact Muon Solenoid (CMS) experiment. The analysis employs an event topology , which consists primarily of opposite-sign di-leptons accompanied by hadronic jets and missing transverse energy. The search utilizes data produced by the proton-proton collision of the LHC at a center-of-mass energy p s = 7 TeV and recorded by the CMS detector in... 

Mass transfer of a drop moving in a bulk fluid is an interesting subject which has attracted a lot of attention. Understanding effective parameters in this process would be helpful in order to increase the efficiency of the industrial processes related to mass transfer. In this research, the deformation and mas transfer of a moving drop was studied numerically. Navier-Stokes equations and concentration equation were solved separately with a VOF method in an axisymmetric domain using Fluent software. Comparision between numerical results and former experimental results proves the accuracy of the modelling in both fields of deformation and mass transfer. Moreover, effects of the physical... 

e solution for fully non-linear equations do not exists in general and for this reason the notion of viscosity solutions has been defined in this context. In this dissertation, a Monte carlo method is introduced for parabolic fully non-linear together with its asymptotics. In the proof of convergence, the method of [6] is used. en the rate of convergence from both sides is introduced: Finally, the error due to estimation of conditional expectation is derived for the estimation whose error is known with respect to sample size  

Because of the increasing use of distributed computing and edge computing patterns, broadcast communications are becoming increasingly important. This communication should be such that each node can deliver its information to all or part of the network nodes. The quantity of delay should be small enough to not disturb the rest of the control processes.
There are different topologies such as Mesh, Tree and Star networks, each of which has efficiencies according to the type of its media access control. In this thesis, a clustering architecture is proposed using the combination of Frequency Division Multiple Access with Carrier Sensing Multiple Access, and mathematical analysis is performed... 

Einstein's general theory of relativity is an admirable successful and unifier geometrical modeling among concepts of space, time and gravity. This theory along with special theory of relativity made a massive change in our physical view and this, especially in its historical context, has deep and interesting consequences in man's philosophical viewpoint which can be studied. Some parts of this thesis relates to these consequences. Some of these interesting consequences may be hidden by computional or mathematical viewpoint and often these equations do not contain enough intuition. in one part, we provide a formulizatin of Einstein's equaion that is intuitional which can be translated in... 

Tropical algebraic geometry is a fairly new branch in geometry which is called so in honor of Brazilian mathematician Imre Simon who was pioneer of this field.The set equipped with the addition and multiplication is a semifield.Algebraic geometry objects like algebraic varieties can be defined over.Polynomials and rational functions are defined over.The functions that they define are piecewise linear and concave functions and the set of points where they are nonlinear is a tropical variety which is a concave polyhedral. Thus, tropical algebraic geometry is a piecewise linear version of algebraic geometry.Another approach to tropical algebraic geometry comes back to the works of Russian... 

Fatigue cracking has a major impact on the performance of flexible pavements. Many test methods have been established to evaluate and estimate the fatigue life of asphaltic materials. Most of these test methods cannot successfully examine the fatigue properties of asphaltic materials. Recent studies demonstrate that using a standardized composite, which consists of glass beads and asphalt binder, can simulate the stress states that binder experiences in the field. This research used standardized composite to investigate the effect of crumb rubber on the fracture properties of asphaltic materials. To validate the test results, the authors conducted fracture tests on the Fine Aggregate Matrix... 

In the last two decades, novel view synthesis has become increasingly important in the movie and game industries. The new generated views correspond to virtual viewpoints, where no real camera has taken snapshot. Depending on the amount of available information from the scene, different approaches have been proposed to create novel views. If the depth information is available, then by knowing camera relative motion, novel views can be constructed. The conventional cameras only record the intensity of the captured scene, and discard the depth information. In the recent concept of light field cameras, by locating an array of micro-lenses between the camera sensor and the main lens, one can... 

Chip seal is one of the most economical pavement maintenance practice that extends pavement life. To ensure chip seal good performance several quality control methods have been developed. However, most of these methods are qualitative and only measure the stone loss under a certain number on loading. This research developed a new method for quality control of chip seal, based on the assumption that characteristics of the bond between chips and pavement surface play a key role in chip seal performance. To validate this test method, the authors used a wheel track loading test. The results from this research clearly showed that the characteristics of the bond between chips and pavement surface... 

Recently, a new method to investigate chip seal performance has developed by a research team at Sharif University of Technology. This study investigates the effect of various additives such as CRM, SBR Latex, Hydrated Lime and Ordinary Portland Cement (OPC), on the curing time of chip seal by this method. In addition, the chip seal treatments were investigated in different climate conditions like Wet and Wet-Freeze zones. The overall performance of mixture specimens evaluated using creep loading test. In fact, the bonding properties between aggregates and surface of Hot Mix Asphalt measured. The test results were analyzed by using of the work and time parameters. These parameters were... 

A Spirit of Trust results from Brandom's thirty-year effort to give a pragmatistic reading of Hegel's Phenomenology of Spirit. In A Spirit of Trust, Brandom reformulates Hegel's arguments in the language of contemporary Analytical Philosophy and gives a unique interpretation of Hegel's key concepts. In this Thesis, we will examine one of its key concepts, namely, Trust; We will pursue the following questions: First, What is Trust? And what is its connection to other aspects of Brandom's philosophy? Second, How does Trust help us in overcoming Alienation? Third, Are Confession and Forgiveness, which are the constitutive concepts of Trust, psychologistic or normative? Fourth, What is the... 

Cracks or construction joints in an overlayed pavement can propagate into the overlay over time due to various factors, the most important of which are traffic and temperature loading, and cause premature failure of pavement. This propagated cracks are called reflective cracks and the phenomenon of crack propagation into the overlay is called reflective cracking. Use of stress-absorbing membrane interlayers (SAMI) is one of the ways can reduce the occurrence of reflective cracking and/or delay it. One of the most common SAMIs is an asphalt mixture consists of bitumen and aggregate layed down between the old and the veneer layers. The function of the SAMI depends on several factors such as... 

The objective of this research is evaluating the effect of filler type and content on the characteristics of asphaltic materials. The properties of the asphalt mixture are greatly influenced by its components. As asphalt mixtures are composed of two prominent components, aggregates and binder, the change in type and contents of these materials may lead to altering the performance of asphalt mixtures. Aggregates in the asphalt mixtures are categorized into three groups based on their particle sizes: coarse aggregate, fine aggregate and mineral filler. The effect of filler on the characteristics of asphalt mixtures can be examined by changing the type and content of filler and holding the... 

The conventional cameras and displays do not have the ability to record and display the full brightness of the world around us. These deficiencies have led to the development of methods known as High Dynamic Range Imaging. Most of the work done in this field falls into two groups: compression of the light range and its expansion. In compression, the brightness range is intended to display content with a high dynamic range in simple displays. But the goal of expanding the brightness range is to reconstruct HDR content from a low dynamic range one. In addition to the above classification, this field is also categorized based on the type of content (image or video). In this study, the... 

Studies have shown that use of crumb rubber additive can improve the mechanical and performance properties of hot mix asphalts. Nowadays, different methods are used for adding crumb rubber to asphalt mixtures. However, no comprehensive research has been done to investigate the effects of these different methods in cold mix asphalts. In this research, different crumb rubber modification methods were evaluated to compare their effects on cold mix asphalts’ performance. In this regard, various crumb rubber modification methods, such as pre blending crumb rubber into the asphalt before emulsification, post blending crumb rubber into the prepared asphalt emulsion and blending crumb rubber with... 

Nowadays in movie and photography industry, scene reconstruction is of high importance. Capturing data containing the depth information of the scene can help us achieve this goal more easily. Ordinary Cameras do not record depth information of the scene so they can’t ease our task. In 2005, some Stanford Researchers, inspired by Adelson’s work, were able to build the first camera that captures depth information. They called it the light filed camera. In these cameras an array of microlenses is inserted below the main lens. By doing this the camera is able to capture the rays’ intensities and their directions in space too. With this kind of information, we are able to obtain the depth of a...