Sharif Digital Repository

In this paper, as an application in biometrics, the electrical capacitance of normal and cancerous blood samples is experimentally determined in order to test the null hypothesis that the electrical capacitance of the two samples differs. The samples taken from healthy donors and patients diagnosed with different types of hematologic cancer are examined by a cylindrical capacitor with blood as its dielectric. The capacitance of these samples is measured at room temperature and a single frequency of 120 Hz, well below the frequency where β-dispersion starts, using a simple LCR meter device. The measurements indicate that the capacitance of the blood increases under applied electric field for... 

Treatment of cancer involves many invasive procedures that could be a source of distress in kids suffering from cancer. Distress itself can be an important obstacle in patients' acceptance of treatment and their adaptation to it, consequently reducing its efficiency. Distress symptoms, in a spectrum from mild to critical, are shown to be widespread in children struggling with cancer. In recent years to alleviate this psychological condition, researchers have proposed and examined several methods such as relaxation, hypnosis, desensitization, and distraction. This study presents a new approach to explore the impact of utilizing a humanoid robot as a therapy-assistant in dealing with patients'... 

Treating cancer encompasses many invasive procedures that can be a source of distress in oncology patients. Distress itself can be a major obstruction in the path of acceptance of treatment and the patient's adaptation to it, thereby reducing its efficiency. These distress symptoms have been found to be prevalent in children suffering from cancer, in a spectrum from mild to critical. In the past years in response to this psychological suffering, researchers have proposed and tested several methods such as relaxation, hypnosis, desensitization, and distraction. This paper propounds a new approach by exploring the effect of utilizing a humanoid robot as a therapy-assistive tool in dealing with... 

The present study provides an inverse solution and analysis on a new approach for Electrical Impedance Tomography (EIT) process as block method in EIT. In this method, it is assumed that all of the panicles of each block have the same electrical properties (electrical conductivities). This technique is used to enhance image resolution and also to improve reconstruction algorithm. Although this method has been developed for 3D objects, in this study it is assumed that the subject has a (two-dimensional) rectangular shape and is made of fixed size blocks. By considering the previous conditions and computing relationship among currents, voltages and electrical impedances of blocks, the required... 

Identification of different flow regimes in industrial systems operating under two-phase flow conditions is necessary in order to safely design and optimize their performance. In the present work, experiments on two-phase flow have been performed in a large scale test facility with the length of 6 m and diameter of 5 cm. Four main flow regimes have been observed in vertical air-water two-phase flow at moderate superficial velocities of gas and water namely: Bubbly, Slug, Churn, and Annular. An image processing technique was used to extract information from each picture. This information includes the number of bubbles or objects, area, perimeter, as well as the height and width of objects... 

Two-phase flow simulations around a body were not studied before and considering these flows can play a significant role in long-term reliability and safety of industrial systems. In this paper, flow regimes, drag coefficient and void fraction around different cross-section prisms were considered. To achieve this aim, main equations of flow have been developed for investigation of drag coefficient in air-water two phase. Our numerical analyses were performed by a designed and written CFD package which is based on Eulerian-Eulerian approach. Geometries, which have been studied in this article, are: circle, rectangle and triangle, for different aspect ratio (length over width) and leading edge... 

Micro/Nano mechatronic systems might be defined as systems that include nano- or micro-scale components. These components can be sensors, actuators, and/or physical structures. Furthermore, the high-precision control laws for such small scales are important to ensure stability, accuracy, and precision in these systems. In this writing, four categories of such small-scale systems are considered by providing multifarious novel or key examples from the literature: control engineering and modeling, design and fabrication, measurement engineering, and sensor/actuator development. The applications discussed in the examples vary from nano-positioners, crucial in systems such as atomic force... 

In order to safe design and optimize performance of industrial systems which work under two phase flow conditions, it's often needed to categorize flow into different regimes. In present work the experiments of two phase flow were done in a large scale test facility with length of 6m and 5cm diameter. Four main flow regimes were observed in vertical air-water two phase flows at moderate superficial velocities of gas and water: Bubbly, Slug, Churn and Annular. Some image processing techniques were used to extract information from each picture. This information include number of bubbles or objects, area, perimeter, height and width of objects (second phase).Also a texture feature extraction... 

In this study, the flow patterns of air-water, two-phase flows have been investigated experimentally in a vertical mini pipe. The flow regimes were observed by a high speed video recorder in pipes with diameters of 2,3 and 4 mm and length 27, 31 and 25 cm, respectively. The comprehensive visualization of air-water, two-phase flow in a vertical mini pipe has been performed to realize the physics of such a two-phase flow. Different flow patterns of air-water flow were observed simultaneously in the mini pipe at different values of air and water flow rates. Consequently, the flow pattern map was proposed for flow in the mini-pipe, in terms of superficial velocities of liquid and gas phases. The... 

In order to safe design and optimize performance of some industrial systems, it's often needed to categorize two-phase flow into different regimes. In each flow regime, flow conditions have similar geometric and hydrodynamic characteristics. Traditionally, flow regime identification was carried out by flow visualization or instrumental indicators. In this research3 kind of neural networks have been used to predict system characteristic and flow regime, and results of them were compared: radial basis function neural networks, self organized and Multilayer perceptrons (supervised) neural networks. The data bank contains experimental pressure signalfor a wide range of operational conditions in... 

Central Nervous System (CNS) malignant tumors are a leading cause of death worldwide with a high mortality rate. While numerous strategies have been proposed to treat CNS tumors, the treatment efficacy is still low mainly due to the existence of the Blood–Brain Barrier (BBB). BBB is a natural cellular layer between the circulatory system and brain extracellular fluid, limiting the transfer of drug particles and confining the routine treatment strategies in which drugs are released in the blood. Consequently, direct drug delivery methods have been devised to bypass the BBB. However, the efficiency of these methods is not enough to treat deep and large brain tumors. In the study at hand, the...