Sharif Digital Repository

The paper deals with investigation of the effects of vacancy defects on the pull-in behaviors of the carbon nanotubes. The influences of single, double and triple vacancies in different peripheral and longitudinal positions are studied. The results reveal that the vacancy defects drastically reduce the pull-in charge because they weaken the nanostructure. Moreover, the effects of residual stresses on the pull-in and vibrational properties of the carbon nanotubes are scrutinized. The influences of the angular deviations from the parallel positions of the CNT and ground plate during the fabrication process are also reported. Copyright  

The paper deals with studying the deflection and pull-in voltages of the carbon nanotubes under electrostatic actuation with various dimensions and boundary conditions. The size-dependent behaviors of the carbon nanotubes (CNTs) are considered via application of the strain gradient theory. The results obtained from the strain gradient theory are compared to those estimated using the classical elasticity. The outcomes reveal that the classical elasticity theory underestimates the pull-in voltages of the carbon nanotubes and strain gradient theorem results in stiffer nano-structures with higher pull-in voltages. Increasing of the deflection due to the higher voltages increases the differences... 

This paper deals with investigation of fluid flow on static and dynamic behaviors of carbon nanotubes under electrostatic actuation. The effects of various fluid parameters including fluid viscosity, velocity, pressure and mass ratio on the deflection and pull-in behaviors of the cantilever and doubly clamped carbon nanotubes are studied. Furthermore, the effects of temperature variation on the static and dynamic pull-in voltages of the doubly clamped carbon nanotubes are reported. The results reveal that altering the fluid parameters significantly changes the mechanical and pull-in behaviors. Hence, the proposed system can be applied properly as a nano fluidic sensor to sense the various... 

The paper deals with the investigation of nonlinear static and dynamic behaviors of electrostatically actuated carbon nanotubes with different geometries and boundary conditions. The deflection and pull-in properties are studied in detail in the presence of DC and combined DC+AC electrostatic voltages accompanying the interatomic interactions. The considered nano system can be applied in a wide range of nanoelectronics devices such as nano switches, nano resonators, nano transistors, nano capacitors and random access memories. Moreover, a useful mathematical model of the nano sensor application of the studied nano system to sense the stiffness of the nano particles is presented  

The paper presents the effects of fluid flow on the static and dynamic properties of carbon nanotubes that convey a viscous fluid. The mathematical model is based on the modified couple stress theory. The effects of various fluid parameters and boundary conditions on the pull-in voltages are investigated in detail. The applicability of the proposed system as nanovalves or nanosensors in nanoscale fluidic systems is elaborated. The results confirm that the nanoscale system studied in this paper can be properly applied for these purposes  

This paper analyzes the deflection and pull-in behaviors of cantilever and doubly clamped carbon nanotubes (CNTs) under electrostatic actuation using the homotopy perturbation method. The effects of electrostatic force and interatomic interactions on the deflection and pull-in instabilities of CNTs with different lengths, diameters, and boundary conditions are investigated in detail. The results reveal that larger diameters and shorter lengths result in higher pull-in voltages. Moreover, CNTs with doubly clamped boundary conditions, in comparison with cantilever boundary conditions, are more resistant to pull-in  

The paper presents size-dependant mechanical behaviors of carbon nanotubes under electrostatic actuation using modified couple stress theory. The behaviors of the carbon nanotubes with different geometries and boundary conditions are studied in detail. The results reveal that application of this theory results in higher pull-in voltages for both cantilever and doubly clamped boundary conditions  

The paper deals with scrutinizing the vibration and dynamic pull-in behaviours of carbon nanotubes with different dimensions and boundary conditions. The strain gradient theory as a nonclassical elasticity theorem is applied in this research to compensate the limitations of the classical theories in predicting the mechanical behaviours of the micro- and nanostructures in general and carbon nanotubes, in particular under electrostatic actuation. The results reveal that the mechanical properties of carbon nanotube (CNTs) computed using the strain gradient theory differ significantly with those obtained from the classical theory. The strain gradient theory leads to higher stiffness and pull-in... 

Modified couple stress theory is a size-dependent theorem capturing the micro/nanoscale effects influencing the mechanical behaviors of the micro- and nanostructures. In this paper, it is applied to investigate the nonlinear vibration of carbon nanotubes under step DC voltage. The vibration, natural frequencies and dynamic pull-in characteristics of the carbon nanotubes are studied in detail. Moreover, the effects of various boundary conditions and geometries are scrutinized on the dynamic characteristics. The results reveal that application of this theory leads to the higher values of the natural frequencies and dynamic pull-in voltages  

In this paper, the classical and nonlocal elasticity are applied to investigate the deflection and instability of electrostatically actuated carbon nanotubes. The results are presented for different geometries and boundary conditions. They reveal that increasing radius and gap and decreasing length confine to increasing pull-in voltages of the carbon nanotubes. The results prove that application of the nonlocal elasticity theorem leads to stiffer structures with higher pull-in voltages. Thus, in order to obtain more accurate results about the mechanical and electromechanical behaviors of the carbon nanotubes, one should apply the nonclassical elasticity theories such as that applied in this... 

This paper presents the deflection and pull-in instability of the double-walled carbon nanotubes with different dimensions and boundary conditions. Molecular dynamic technique is applied to model the desired behaviors of the nano systems. The effects of cross-linking between the carbon walls are investigated on the pull-in charge. In addition, the influences of axial stretching on the pull-in charge and vibrational frequencies of the carbon nanotubes are scrutinized. The effects of electrostatic charge distribution on the vibration amplitude are also reported  

The paper investigates the effects of fluid flow on the static and dynamic behaviors of electrostatically actuated carbon nanotubes using nonlocal elasticity theory. The influences of various parameters of fluid flow including fluid viscosity, velocity, mass and temperature on the mechanical behaviors of the carbon nanotubes under static and step DC voltages are studied using this theory. The results computed from the nonlocal elasticity theory are compared with those estimated using the classical elasticity theorem and the outcomes demonstrate the applicability of the electrostatically actuated carbon nanotubes as nano sensors and nano actuators in nanofluidic systems. The nanosystem can be... 

This paper deals with investigation of deformations and pull-in charges of the cantilever and doubly clamped carbon nanotubes (CNTs) with different geometries using molecular dynamics simulation technique. The well-known AIREBO potential for the covalent bonds between carbon atoms, Lennar-Jones potential for the vdW interaction and the Coulomb potential for electrostatic actuation are employed to model the nano electromechanical system. The results reveal that longer CNTs with smaller diameters have smaller pull-in charges in comparison with shorter CNTs possessing larger diameters. Furthermore, the pull-in charges of the doubly clamped CNTs are higher than the pull-in charges of the... 

The paper investigates the effects of application of nonlocal elasticity theory on electromechanical behaviors of single-walled carbon nanotubes under electrostatic actuation. The influences of different dimensions and boundary conditions on the vibration and dynamic instability of the carbon nanotubes are studied, in detail, using this theory. The results reveal that application of the non-local elasticity theory leads to the higher pull-in voltages for the nonlocal model applied for carbon nanotubes. Thus, in order to have more accurate results, one should apply nonclassical theorems such as the nonlocal elasticity theory to scrutinize the mechanical and electromechanical behaviors of the... 

The paper investigates the influences of fluid flow on static and dynamic behaviours of electrostatically actuated carbon nanotubes (CNTs) using strain gradient theory. This nonclassical elasticity theory is applied in order to obtain more accurate results possessing higher agreement with the experimental data. The effects of various fluid parameters such as the fluid viscosity, velocity, mass and temperature on the pull-in properties of the CNTs with two cantilever and doubly clamped boundary conditions are studied. The results reveal the applicability of the proposed nano-system as nano-valves or nano-fluidic sensors  

A single-degree-of-freedom model is considered for flexible exercise bars based on the lumped-element approach. By considering the side segment of a flexible bar as a cantilever beam with an equivalent mass at the free end, its free-vibration response, as well as the forced response under the excitation of the grip, are expressed parametrically. Experiments are performed on a particular flexible bar (FLEXI-BAR) in order to obtain numerical values for quantifying the model's parameters. The model is also computationally simulated to study the response of the flexible bar to various excitations. The results are imported into a multi-segment musculoskeletal software (AnyBody), where the effect... 

The first step to locate Partial Discharge in power transformers is to find a model that can clearly explain the behavior of the winding in high-frequency. The detailed model is one of the models used for the study of PD. One of the fundamental problems of the described model is to find its parameters. And the accuracy in calculating these parameters has significant impact on reducing the simulation error and PD locating. The current paper seeks to calculate the parameters of the detailed model 20kv distribution transformer winding by using the finite element method (FEM). Comparing the results of this model with pulse waveforms obtained from the PD to the winding in the laboratory... 

Bioinspired materials can mimic the stem cell environment and modulate stem cell differentiation and proliferation. In this study, biomimetic micro/nanoenvironments were fabricated by cell-imprinted substrates based on mature human keratinocyte morphological templates. The data obtained from atomic force microscopy and field emission scanning electron microscopy revealed that the keratinocyte-cell-imprinted poly(dimethylsiloxane) casting procedure could imitate the surface morphology of the plasma membrane, ranging from the nanoscale to the macroscale, which may provide the required topographical cell fingerprints to induce differentiation. Gene expression levels of the genes analyzed...