Sharif Digital Repository

'Three-link-model' Exergoeconomic methodology optimises the design and operability of a system. Contrary to traditional iterative Exergoeconomic optimisation methods, a reversed method is used, since assumptions considered by Tsatsaronis for calculating cost-optimal Exergetic efficiency and relative cost difference, were not applicable, new assumptions have been adopted. In a case study applied to Mazandaran paper industry, iterative reversed optimisation results have been compared with evolutionary programming results. Replacement of Pressure Valve and Direct Cyclone Contact Evaporation is proposed, while by selection of the optimum decision variable, recoverable black liquor is increased... 

4E analysis is used on a Brayton-Rankine combined cycle power plant (CCPP) with a dual pressure heat recovery steam generation (HRSG) system. A multi-objective genetic-based evolutionary optimization has been used to estimate the most optimal exergy efficiency status, exergy cost reduction, carbon emission reduction, and NOx emission reduction. For the validation of the data, the simulation results are compared with the plant's data. This study investigates the effect of every decisive parameter on the objective performance parameters of the CCPP. The primary estimated results are the emission rates, efficiencies, and the exergoeconomic cost of the system. At the optimum operational state,... 

Bitcoin's (BTC) mining process utilizes the proof of work (PoW) concept as the consensus algorithm., which consumes electricity. As a result., there are concerns regarding its sustainability and carbon emission. If one wants to estimate these, they first should have an estimation of the network's energy consumption which is hard to calculate due to its decentralized nature. To do so., two methods are conceivable. First, considering electricity price and miner's revenue (electricity costs are considered as a part of total revenue., then divided by electricity price to obtain electricity consumption), second, using hash rate along with the efficiency of mining devices. The latter is utilized... 

Gasification of black liquor is an alternative recovery technology. Pulp and paper industries are turning their attention to black liquor gasification as a replacement for recovery boilers. Gasification-combined cycle exergoeconomic analyses have been used to study the economical and exergetical performance of black liquor. Both conventional iterative exergoeconomic optimization and multi objective evolutionary optimization have been applied. The iterative optimization results have been compared with evolutionary programming results in order to evaluate the accuracy. The strength of proposed optimization methods are elucidated in a case study applied to Mazandaran Wood and Paper Industries... 

By simultaneously applying pinch technology and the exergoeconomic method to a complex process system, beneficial and energy-efficient measures are identified. The "three-link-model" exergoeconomic methodology optimizes the design and operability of a system. In this work, contrary to traditional exergoeconomic methods, a reversed method is used. The approach proposed for the optimization of such a complex system is to iteratively optimize subsystems. Since the reversed exergoeconomic method is used, assumptions considered by Tsatsaronis (based on four assumptions for calculating the cost-optimal exergetic efficiency and relative cost difference) are not applicable and new assumptions are to... 

Optimization methods for process integration of industrial networks presented so far have dealt with grass-root situation. For retrofit ones, the actual design of the existing heat exchanger network must be taken into account. Berntsson and Stromberg (1996) developed new Composite Curves for use in a targeting and options scanning in retrofitting. The aim of this development has been to create Pinch Technology based methods, with which the general problems with process integration in Retrofit can be treated. New Pinch Technology based curves for retrofitting of heat exchanger networks have provided a graphical representation of existing HEN, including heaters and utility levels, from which... 

This paper proposes using sodium-cooled fast reactor technologies for use in hydrogen vapor methane (SMR) modification. Using three independent energy rings in the Russian BN-600 fast reactor, steam is generated in one of the steam-generating cycles with a pressure of 13.1 MPa and a temperature of 505 °C. The reactor's second energy cycles can increase the gas-steam mixture's temperature to the required amount for efficient correction. The 620 ton/hr 540 °C steam generated in this cycle is sufficient to supply a high-temperature synthesis current source (700 °C), which raises the steam-gas mixture's temperature in the reactor. The proposed technology provides a high rate of hydrogen... 

In this paper, we investigate the processes of evaporation and accretion of primordial black holes during the radiation-dominated era and the matter-dominated era. This subject is very important since usually these two processes are considered independent of each other. In other words, previous works consider them in such a way that they do not have a direct effect on each other, and as a result, their effects on the mass of primordial black holes are calculated separately. The calculations of this paper indicate that assuming these two processes independent of each other will lead to wrong results that only give correct answers within certain limits. In fact, in general, it is a mistake to... 

This study combines an investigation of Kish Island's transition to sustainable energy and transportation with a focus on the integration of hydrogen port infrastructure, employing nonlinear optimization to chart the path forward. It emphasizes the pivotal role of such infrastructure in transitioning from traditional vehicles and gas-fired power, evaluating scenarios like a 30% reduction in fossil fuels and the implementation of carbon taxes to encourage a shift to electric and hydrogen-powered vehicles. Forecasts suggest an increase in electric vehicle adoption to 46% by 2023, with a goal of complete electrification by 2042, thereby transforming the energy landscape and reducing emissions.... 

One of the fundamental questions about quasars is related to their central supermassive black holes. The reason for the existence of these black holes with such a huge mass is still unclear, and various models have been proposed to explain them. However, there is still no comprehensive explanation that is accepted by the community. The only thing we are sure of is that these black holes were not created by the collapse of giant stars or the accretion of matter around them. Moreover, another important question is related to the mass distribution of these black holes over time. Observations have shown that if we go back through redshift, we see black holes with more mass, and after passing the... 

The thermal history of the intergalactic medium is full of extremely useful data in the field of astrophysics and cosmology. In other words, by examining this environment in different redshifts, the effects of cosmology and astrophysics can be observed side by side. Therefore, simulation is a very powerful tool to reach a suitable model for the intergalactic medium, both in terms of cosmology and astrophysics. In this work, we have simulated the intergalactic medium with the help of the 21cmFAST code and compared the evolution of the neutral hydrogen fraction in different initial conditions. Considerable works have arbitrarily determined many important effective parameters in the thermal...