Sharif Digital Repository

Steganalysis of least significant bit (LSB) embedded images in spatial domain has been investigated extensively over the past decade and most well-known LSB steganography methods have been shown to be detectable. However, according to the latest findings in the area, two major issues of very low-rate (VLR) embedding and content-adaptive steganography have remained hard to resolve. The problem of VLR embedding is indeed a generic problem to any steganalyser, while the issue of adaptive embedding specifically depends on the hiding algorithm employed. The latter challenge has recently been brought up again to the area of LSB steganalysis by highly undetectable stego image steganography that... 

Friction stir processing (FSP), as an advanced technique, was employed to fabricate in situ aluminum composites with the aim to elucidate the correlation between microstructure and mechanical properties of the obtained composites. The novelty of the work is to utilize simultaneous incorporation of Fe and Cu powders into the friction stir zone in order to fabricate in situ aluminum composites. To achieve the goal, the loading content of Cu and Fe powders and the process pass number (1 pass to 5 passes) were altered. While the total loading content of Fe and Cu powders was kept constant, the weight percentages of these reinforcements were varied (25%, 50%, and 75%). Microstructural... 

This paper addresses the fabrication of bronze-nano-graphite coatings containing 30. nm sized graphite particles. Addition of Poly Vinyl Pyrrolidone (PVP) and dispersing the suspension by ultrasound was utilized to stabilize the electroplating solution. Pulsed current electrodeposition was used and the deposits were characterized in terms of graphite content, particle dispersion in coating and morphology. The wear behavior of the coating was compared to bronze-micro-graphite coatings prepared with the same experimental conditions. The present coating showed improved wear resistance in comparison to bronze-micro-graphite coatings at the same graphite content  

Asymmetric sheet rolling is simulated by using an elastic-plastic arbitrary Lagrangian-Eulerian (ALE) finite element method. The ALE finite element approach easily predicts the curvature development due to inequality in work roll/plate surface finish (interface friction) and speed mismatch. An isotropic work hardening material is assumed. Reasonable agreements were found between the numerical method and the experimental results. © 2006 Elsevier B.V. All rights reserved  

Multi-dimensional spatial analysis of image pixels have not been much investigated for the steganalysis of the LSB Steganographic methods. Pixel distribution based steganalysis methods could be thwarted by intelligently compensating statistical characteristics of image pixels, as reported in several papers. Simple LSB replacement methods have been improved by introducing smarter LSB embedding approaches, e.g. LSB matching and LSB+ methods, but they are basically the same in the sense of the LSB alteration. A new analytical method to detect LSB stego images is proposed in this paper. Our approach is based on the relative locations of image pixels that are essentially changed in an LSB... 

Locally multipath adaptive routing (LMAR) protocol, classified as a new reactive distance vector routing protocol for MANETs is proposed in this paper. LMAR can find an ad-hoc path without selfish nodes and wormholes using a random search algorithm in polynomial-time. Also when the primary path fails, it discovers an alternative safe path if network graph remains connected after eliminating selfish/malicious nodes. The main feature of LMAR to seek safe route free of selfish and malicious nodes in polynomial time is its searching algorithm and flooding stage that its generated traffic is equiloaded compared to single-path routing protocols but its ability to bypass the attacks is much better... 

We investigate large wireless networks subject to security constraints. In contrast to point-to-point, interferencelimited communications considered in prior works, we propose active cooperative relaying-based schemes. We consider a network with nl legitimate nodes, ne eavesdroppers, and path loss exponent α ≥ 2. As long as n2e (log(ne))γ = o(nl ), for some positive γ , we show that one can obtain unbounded secure aggregate rate. This means zero-cost secure communication, given fixed total power constraint for the entire network. We achieve this result through: 1) the source using Wyner randomized encoder and a serial (multi-stage) block Markov scheme, to cooperate with the relays and 2) the... 

Investigating the impact of geological uncertainty (i.e., spatial distribution of fractures) on reservoir performance may aid management decisions. The conventional approach to address this is to build a number of possible reservoir models, upscale them, and then run flow simulations. The problem with this approach is that it is computationally very expensive. In this study, we use another approach based on the permeability contrasts that control the flow, called percolation approach. This assumes that the permeability disorder of a rock can be simplified to either permeable or impermeable. The advantage is that by using some universal laws from percolation theory, the effect of the complex... 

Recently, a new class of binary codes for overloaded CDMA systems are proposed that not only has the ability of errorless communication but also suitable for detecting active users. These codes are called COWDA. In [1], a Maximum Likelihood (ML) decoder is proposed for this class of codes. Although the proposed scheme for coding/decoding shows impressive performance, the decoder can be significantly improved. In this paper, by assuming practical conditions for the traffic in the system, we suggest and prove an algorithm that increases the performance of the decoder several orders of magnitude (the Bit-Error-Rate (BER) is divided by a factor of about 400 in some E b/N0's). The algorithm... 

In this paper we present new methods to estimate the effective permeability (keff) of heterogeneous porous media with a wide distribution of permeabilities and various underlying structures, using percolation concepts. We first set a threshold permeability (kth) on the permeability density function and use standard algorithms from percolation theory to check whether the high permeable grid blocks (i.e., those with permeability higher than kth) with occupied fraction of “p” first forms a cluster connecting two opposite sides of the system in the direction of the flow (high permeability flow pathway). Then we estimate the effective permeability of the heterogeneous porous media in different... 

It has long been understood that flow behavior in heterogeneous porous media is largely controlled by the continuity of permeability contrasts. With this in mind, we are looking in new methods for a fast estimation of the effective permeability which concentrates on the properties of the percolating cluster. From percolation concepts we use a threshold permeability value (Kth) by which the gridblocks with the highest permeability values connect two opposite side of the system in the direction of the flow. Those methods can be applied to heterogeneous media of a range of permeabilities distribution and various underlying structures. We use power law relations and weighted power averages that... 

Precise prediction of Remaining Useful Life (RUL) within the transportation industry is essential for cost reduction and enhanced energy efficiency, focusing on extending the operational lifespan of proton exchange membrane fuel cells (PEMFCs). In pursuit of this objective, this study employs data-driven prediction methodologies centered on deep neural networks and transfer learning. The fundamental premise is that these approaches hinge on the compatibility of functional conditions across diverse datasets. Multiple strategies, amalgamating transfer learning, and deep neural networks, are introduced to forecast the PEMFC stack's behavior and its associated RUL. Network hyperparameters are... 

Indium tin oxide (ITO) thin films have been deposited using RF sputtering technique at different pressures, RF powers, and substrate temperatures. Variations in surface morphology, optical properties, and film resistances were measured and analyzed. It is shown that a very low value of sheet resistance (1.96 ω/sq.) can be achieved with suitable arrangement of the deposition experiments. First, at constant RF power, deposition at different pressure values is done, and the condition for achieving minimum sheet resistance (26.43 ω/sq.) is found. In the next step, different values of RF powers are tried, while keeping the pressure fixed on the previously found minimum point (1-2 Pa). Finally,... 

Seven different types of gasification-based coal conversion processes for producing mainly electricity and in some cases hydrogen (H2), with and without carbon dioxide (CO2) capture, were compared on a consistent basis through simulation studies. The flowsheet for each process was developed in a chemical process simulation tool "Aspen Plus". The pressure swing adsorption (PSA), physical absorption (Selexol), and chemical looping combustion (CLC) technologies were separately analyzed for processes with CO2 capture. The performances of the above three capture technologies were compared with respect to energetic and exergetic efficiencies, and the level of CO2 emission. The effect of air... 

Single-crystal hydroxyapatite (HAp) nanorods and nanogranules have been synthesized successfully by a mechanochemical process using two distinct experimental procedures. The experimental outcomes are characterized by transmission electron microscopy (TEM), and powder X-ray diffraction (XRD) techniques. In this work, the feasibility of using polymeric milling media to prepare hydroxyapatite nanoparticles is described. The resulting hydroxyapatite powder exhibits an average size of about 20 to 23 nm. Final results indicate that the proposed synthesis strategy provides a facile pathway to obtain single-crystal HAp with high quality and suitable morphology. © 2008 Elsevier B.V. All rights... 

Migration to the cloud has been a popular topic in industry and academia in recent years. Despite many benefits that the cloud presents, such as high availability and scalability, most of the on-premise application architectures are not ready to fully exploit the benefits of this environment, and adapting them to this environment is a non-trivial task. Microservices have appeared recently as novel architectural styles that are native to the cloud. These cloud-native architectures can facilitate migrating on-premise architectures to fully benefit from the cloud environments because non-functional attributes, like scalability, are inherent in this style. The existing approaches on cloud... 

Estimating available hydrocarbon to be produced during secondary oil recovery is an ongoing activity in field development. The primary plan is normally scheduled during early stage of field's life through master development plan studies. During this period, due to the lake of certain data, estimation of the field efficiency is usually based on rules of thumb and not detailed field characterization. Hence, there is a great motivation to produce simpler physically-based methodologies. The minimum necessity inputs of percolation approach make it a useful tool for foration performance prediction. This approach enables us to attain a better assessment of the efficiency of secondary recovery... 

Development of reliable and accurate models to estimate carbon dioxide–brine interfacial tension (IFT) is necessary, since its experimental measurement is time-consuming and requires expensive experimental apparatus as well as complicated interpretation procedure. In the current study, feed forward artificial neural network is used for estimation of CO2–brine IFT based on data from published literature which consists of a number of carbon dioxide–brine interfacial tension data covering broad ranges of temperature, total salinity, mole fractions of impure components and pressure. Trial-and-error method is utilized to optimize the artificial neural network topology in order to enhance its...