Sharif Digital Repository

In the presented research, feasibility of producing hybrid nano-composite on the surface of Al1050 with TiO2 (~15 nm) and Graphite (~100 μm) reinforcement particles via Friction Stir Processing (FSP) has been investigated. 1.93%, 1.68% and 1.44% are the weight percentage of added reinforcement particles in the nano-composite. Rotational and travelling speeds (and their ratio, ω/v) and volume fraction of the embedded reinforcement particles, mentioned as variable parameters in this research. Despite, effect of these parameters on the microstructural evolution and mechanical properties such as strength, hardness and wear, were studied. Results in the ratio of Gr/TiO2 = 1/3, revealed that by... 

While Cloud providers face problems during providing services to their clients, such as lack of resources or increasing idle resources in low workload; they can share their resources with other providers by participating in Cloud Federations, and take advantage of Cloud Computing benefits like high scalability and resource extension. Moreover collaborating Cloud Federations expands Geographical area of providers. The Resource Allocation Problem has been considered in many researches, but in fields like Cloud environment and Federated Clouds it comes with complications. This thesis analyzes an optimized mechanism based on game theoretic approach for Resource Allocation Problem in Federated... 

In recent years, due to urban expansion and population growth, number of floors and excavations depth has increased. Stabilization of excavations is one of the most important issues in geotechnical engineering. Today, one of the most widely used methods that is used in deep excavations is brace soil by steels and pretension them. In this thesis tries to evaluate static behavior of flexible supporting structures with pretension anchors by using PLAXIS2D, FLAC3D and GEOSTUDIO softwares. The objective of this modeling is better understanding the static behavior of walls, comparing the two and three dimensional modeling and the effect of corners of excavation on deformation. The results shows... 

Traffic flow modeling on different levels was always the topic of many studies. In this regard, many researchers have tried to eliminate traffic problems by developing precise models. Therefore, in this study and in its two major parts, we developed two models: one macroscopic and one microscopic. Like previous studies, the main purpose here was the development of traffic flow models that have better precision and give more information about the mechanism behind the traffic phenomena. Our focus was on the free spaces in front of drivers which were considered in a macroscopic traffic flow model and resulting microscopic traffic flow model.First part, addresses the first-order extension of the... 

In this study TiO2/SiO2 thin films were prepared by sol-gel method from Tetra isopropylortho Titanate(TIPT) as the principle of TiO2 material with Tera ethoxysilane(TEOS) as the principle of SiO2 material to achieve high scratch-resistant , antibacterial and self-cleaning surface area under the effect of various percentage of SiO2 . Film deposition was carried out using a dip-coating technique and heat-treatment was used at 700ºC to achieve crystalline of films with excellent adherence the of substrate.
The surface morphology of the films has been observed by Scanning Electron Microscope (SEM) and the tribological properties of the surface were investigated by Atomic Force Microscope... 

Ball mills are a category of industrial mills used for crushing and grinding non-metallic materials into powder. In these mills, as the mill rotates, steel balls move and by falling on materials, the process of crushing and grinding takes place. The mismatch between the rotation speed of the mill and the volume of balls inside it can result in ineffective collisions between the balls or between the balls and the inner protective layers of the mill, causing damage to the balls and liners and leading to repair costs and loss of production. The aim of this project is to design and prototype an intelligent system for monitoring the ball mass inside the mill to increase production efficiency and... 

The problem of path simplification is an important problem in computer science. With the advances in navigation and geographical information based systems, simplification and data compression have gained considerable importance. The intends to find a path with less weight than the provided path while estimating the initial path with good accuracy and simplifying the storage and process cost of path information. This problem is not only useful in Geographical Information Systems, but it also has use cases in image processing and computer graphics and has been studied a lot in computational geometry. In this research, we introduce a simplification game that models the limited version of the... 

The aim of this study was electrodeposition of Zn-Ni-P/Zn-Ni multilayer coatings by single-bath method from a citrate bath to produce a sacrificial coating with high barrier properties compared to Zn-Ni monolayer coating. The coatings that were prepared at 10 mA/cm2 was Zn-Ni-P (Ni-rich and percentage of zinc, nickel and phosphorus, respectively: 40, 50 and 10 %), and the alloy deposited in 60 mA/cm2 were practically Zn-Ni (Zn-rich, 85% zinc) and almost phosphorus free. Galvanostatic pulse deposition method through switching of the current density between the two values mentioned in monolayers (10 and 60 mA/cm2) in different time periods to create bilayers corresponding to the monolayers,... 

Many processes and real world systems indicate nonlinear behavior and operate either naturally in multiple regions or in a wide range of operation space. Modelling and control of these systems by nonlinear methods needs to have a deep insight. Furthermore, the nonlinear methods leads to complexity issues. To overcome these problems, multi-model methods are introduced which consist of two steps, decomposition and combination. In decomposition step, the complex system is divided into a set of simple models; in the combination step, the behavior of local models are combined. How to decompose to local models and how to combine them are two main questions in this area which not answered... 

By studying and evaluating methods for producing deuterium gas from heavy water, the electrolysis method with polymer membranes (PEM) was defined as the proposed method.The (PEMWEs) is a new method in electrolysis, which utilizes solid polymer electrolyte (SPE) membranes as electrolytes to play a significant role in reducing the resistivity in the electrolysis and also in comparison with alkaline electrolysis in terms of energy consumption and optimal being in condition is also a better condition for the purity of the produced gas.In this regard, a polymer electrolyte membrane water electrolysers (PEMWEs) was designed and developed on a laboratory scale. After analysis of the sample gas, and... 

Electromagnetic levitation(EML) provides a process producing nanoparticles using gas condensation method. In gas condensation processes, vapor is produced by heating the sample then inert gas is applied to provide the inert atmosphere and also cool and condense the sample vapor into a nano powder to obtain a sample nanoparticle. In the EML method, rapidly alternating electromagnetic field induces eddy current in the conducting sample which will heat the sample. The current in the sample result in an induced magnetic field. Consequently, the sample droplet is heated and levitated simultaneously by an induction furnace as a generator. The sample temperature is dependent on parameters such as... 

Digital computers, comprising universal logic gates, are tremendously versatile. This versatility associated with the increasing integrability of digital electronics due to Moore’s law has left nearly no room for analog computers in the last few decades. However, in the case of some specific problems such as modeling complex and nonlinear systems or pro-cessing large amounts of data, computation time and power is still a serious restriction of digital computing. Optical phenomena are fast enough and offer novel approaches to overcome the mentioned restrictions about the system speed and power consumption. Therefore, optical structures make possible to perform ultra-fast spatial analog... 

Shallow geothermal energy is a renewable and sustainable form of energy that has the potential to help alleviate the growing climate and energy crisis. The most common system used to extract shallow geothermal energy is the ground source heat pump (GSHP) system. The concept of using underground structures in exploiting shallow geothermal energy for space heating and cooling has received increasing attention. This study focuses on the use of geothermal tunnels as a means of extracting shallow geothermal energy.This research examines the effects of different heat transfer mechanisms, and highlights the effects of this phenomenon by focusing on the effects of natural convection around the... 

This study aims to propose a new correlation between in-situ horizontal stress and cone tip resistance in soils. Knowing the field in-situ stress state condition has an important role in stability assessment and stress-deformation analysis in a common geotechnical system. Although vertical stress could be measured easily, horizontal stress is still known as challenging work. Due to the difficulty in sampling undisturbed sand specimens, in-situ tests have been proposed in the previous literature to investigate the different characteristics of this soil. Cone Penetration Test (CPT) is one of the most used and accepted soil methods for soil investigation, identifying different soil parameters... 

In this research with Finite Element Methods in ABAQUS, numerical modeling has done in three-dimensions, which can be used to determine the effect of different factors on the surface settlement. Also, various factors such as geotechnical conditions, tunnel diameter,tunnel depth, the impact of the thickness of the segments and the amount of eccentricity of the structure relative to the longitudinal axis of the tunnel considered in this study. Face Pressure Supports, and Grout Injection Pressures are taken into account, too.Tunnel drilling causes a change in the displacement area and creates a changing zone around the tunnel. In this regard, not only adjacent buildings will be affected by... 

In recent years, with the growth of industrial societies, the amount of energy consumption in the world has been increasing. On the other hand, the most consumed energy sources in the world are non-renewable energy sources. For this reason, governments and industries have invested to facilitate and make renewable energy sources cheaper. One of these renewable energies is geothermal energy, which is one of the most economical ways to use this energy, using heat exchange systems in piles and foundations. Using a heat exchange fluid, energy piles transfer the heat of the earth's surface to the ground with a lower temperature in the hot seasons of the year and use the thermal energy of the...