Sharif Digital Repository

Mobile and wireless services industry has been among the most attractive businesses recently and is progressing at a fast pace. In this huge industry various organizations and entities cooperate to deliver value to the end user. The mobile operator plays the pivotal role in this chain. Hence mobile operator’s market was chosen in this study as the representative of the industry. Market segmentation and customer satisfaction are the main topics of this study.
Market segmentation for MCI was done using data mining with two-step algorithm. Input data included the consumer behavior extracted from mobile post-paid bills. The results indicated five distinctive clusters. The next part included... 

In this study, aqueous two-phase systems (ATPS) containing Tween 20 as a biocompatible nonionic surfactant and three different salts (NH4HPO4, NH4CH3COO and Mg(CH3COO)2 ) were prepared and their extractive potential for Lysozyme enzyme was evaluated. These systems have surfactant-rich top phase and salt-rich bottom phase. Phase equilibrium diagrams at 23 ° C were obtained by using the cloud point method and the results were successfully fitted to the Merchuk correlation and their trends were correlated with the effective excluded volume (EEV) parameter. Afterward, the partitioning behavior of the lysozyme and its extraction efficiency in the systems of Tween 20/diammonium hydrogen phosphate,... 

Titanium dioxide, due to its specific semiconductive properties, has been a highly investigated material for a variety of applications including gas sensors, hydrogen generation by water photoelectrolysis, photocatalysis, dye-sensitized solar cells and purification of water and air. Several recent studies have indicated that titania nanotubes have improved properties compared to any other form of titania for mentioned application. Titania nanotubes have been produced by a variety of methods including deposition into a template and hydrothermal processes. Anodic oxidation of titanium foil in a fluoride-based solution is one of the best methods to produce of titania nanotube arrays. Highly... 

Oil refineries, petrochemical factories and oil platforms produce a large amount of oily wastewater every day. If these wastewaters are released in environment, it can damage soil and water seriously. Although, Biological treatment of oily wastewaters is a well-established method for remediation of these wastes, efficiency of conventional systems such as Activated Sludge, aren’t very high. Also these systems have many problems such as instability during hydraulics shocks and bulking phenomena. the hybrid bioreactor system are designed to increase the efficiency of treatment by allowing greater organic loads, increasing microbial concentration by using attached and suspended bacteria, and... 

Dietary CLA production for medicinal purposes needs a safe and selective process. Biological production methods meet this goal. In this study, the microbial species that was suitable for CLA production was selected; then the CLA produced by bioconversion methods was utilized to produce CLA-enriched triglycerides by trans-esterification. Also the biochemical kinetics of CLA production and esterification reactions to produce CLA-enriched triglycerides was studied. In the presence of two substrates, the kinetics of enzymatic reaction was studied. Then the factors influencing on the microbial yield and CLA production including reaction conditions (reaction time, cell concentration and substrate... 

Cancer has been known as one of the main reasons for disease-related deaths in the last decades. Early diagnosis could significantly reduce the level of fatality chances. Among the known cancer types, lung cancer is one of the most malignant ones. The common diagnosticmethods are expensive and using high-technology methods; therefore, the introduction of simple and cheap methods is very urgent to detect it. In this project, surface and interfacial tension measurement of cancerous and normal lung cells have been investigated as an easy detection technique. Among the common measurement methods, Pendant Drop and Capillary height techniques have been utilized in this research work. The obtained... 

Mechanosensitive (MS) channels are ubiquitous molecular force sensors that respond to a number of different mechanical stimuli including tensile, compressive and shear stress. One of the main mechanisms to functionally study these channels is the patch clamp technique. Here we use continuum mechanics to probe the question of how curvature, in a standard patch clamp experiment, at different length scales (global and local) affects a model MS channel. Firstly, to increase the accuracy of the Laplace’s equation in tension estimation in a patch membrane and to be able to more precisely describe the transient phenomena happening during patch clamping, we propose a modified Laplace’s equation. In... 

In this work, partitioning of amino acids such as glutamic acid, phenyl anine and tryptophan in aqueous and ionic liquid phases at 298.15 K and atmospheric pressure was measured. [C4mim][Tf2N] is used due can produce two phase with water rapidly. Studying the effect of liquid solution pH on amino acids partitioning shows that increasing of pH results in decreasing of amino acid partitioning coefficient. This phenomenon pertains to electrostatic interactions between cation of amino acid and anion of ionic liquid which reduces when pH increases. Considering the effect of pH, liquid-liquid equilibrium data of amino acids was obtained in a pH that owning maximum partioning coefficient. Chemical... 

Metabonomics is a quantitative measurement of time dependent metabolic interactions for living systems in response to the pathological or genetic variations. NMR spectroscopy has emerged as a key tool for understanding metabolic processes in living systems. In this project, the study of metabolomics was performed as classification and regression on samples of parkinson’s disease, multiple sclerosis disease, celiac disease and crohn’s disease. In classification part, various methods were applied using optimal parameters.classification methods in Parkinson’s disease, multiple sclerosis disease, celiac disease and crohn’s disease were RF, CART, PLS-DA, RF and RF respectively. Based on the... 

Prediction of groundwater level fluctuations is absolutely necessary for the proper manag ement of these precious resources. There are different methods to predict hydrological time series such as groundwater level. Linear models inefficiency in predicting nonlinear and n on-stationary time series cause researchers widely use artificial intelligence techniques such as Artificial Neural Networks (ANN), Fuzzy Inference System (FIS), Genetic Algorithm (GA) and their hybrid models such as Artificial Neural – Fuzzy Inference System (ANFIS). These smart models are capable to simulate nonlinear and non-stationary time series in suitable accu-racy using by a few time and data. By emersion of Wavelet... 

Foundation is the lowest load-bearing part of a structure and a part of underneath soil that is affected by the structure load. In fact, foundation transfers the loads from the superstructure to the substructure, preventing excessive settlement of soil or stresses exceeding soil bearing capacity. Indeed, almost all structures are placed on the ground, therefore the effects of soil and structure on each other, which is known as Soil Structure Interaction (SSI), is considered as a key factor in many important and engineered structures. In contrast to structures on a rigid footing, a flexible foundation may show stiffness degradation along with an increase of damping and natural period of the... 

In this project three models addressed before in the references are reviewed and the stability margins of radome error slope obtained by analytical method. Then a new model who is usefull in practical applications presented. Because of complication of this model the model is simplified and stability margins for radome error slope derived in simplified model. It is also shown that simplified applicative model is similar to model purposed in ref. [6]. Then a PD controller designed to stabilize some of models reviewed in chapter 3. The equations derived before verified in continuation of the project. The effects of parameters on the stability of missile analysed by equations derived in chapter... 

Due to the environmental concern for the harmful effect of the release of HFCs on global warming there has been more interest for the use of hydrocarbons as refrigerants in recent years. In this project the performance of these refrigerants have been studied and compared with common refrigerants from the quantitative and qualitative point of view using a real-scale model of Peugeot-405 air conditioning system. Charging amount, inside temperature, cooling load, energy consumption of cycle, coefficient of performance and required time to steady state condition are the important comparative criteria for such a study. After carrying out a series of tests it has been considered that charge... 

With the increasingly collected biological data, appropriate usage of this data is of great importance for understanding and predicting biological systems and has been the aim of experiments and data collections. A famous category of biological data is known as “omics” which refers to transcriptomics, proteomics, metabolomics, and fluxomics, from different cells or tissues in various media and conditions. This set of data is regularly used for tasks such as studying cells and organisms, understanding cell states, cancer prediction, etc. and is of great importance in Systems Biology.In this thesis, we concentrate on studying cells or organisms using such data, where during that process, we... 

One of the most important issues among defense is the increasing of the defense power using present facilities. Therefore, optimal setting and arrangement of equipment by considering different air-to-earth attack of enemy without knowing of properties and capabilities of available systems may not be possible. So, using defense equipment considering properties of them, and paying attention to existence restrictions and effective elements can have an effective role with the design of suitable algorithm.The main purposes of this thesis are: maximization of the efficiency of a defense system against. aerial invader targets, achieving the best arrangement of defense equipment based on suggested... 

In this research the problem is the development and simulation of Transfer Alignment algorithm for an aerial launch space launch vehicle. In the references there is no complete study on development of this algorithm for the case space launch vehicle. In order to develop the algorithm, the carrying airplane and the space launch navigation systems are considered as the Master INS and Slave INS respectively. First a 6DOF simulation of the airplane is presented. Then the desired inputs for simulation of Master and Slave INS are generated. Also the differences of the inputs of Slave INS caused by the distance between the Master and Slave INS is considered. Master INS performs as an ideal INS and... 

With the advancement of the space industry and the expansion of space missions, the need for satellites and spacecraft with more precise sensors and equipment has increased, which in turn increases the payload mass. In today's world, designing launch vehicles that are merely suitable for the mission is not enough; the launch vehicle must be the best and most appropriate system. The best launch vehicle system is one that not only performs the mission well but is also cost-effective, has higher efficiency, higher reliability, and is easier to maintain. This project aims to develop a multi-disciplinary launch vehicle design software with a graphical interface. In this project, using a... 

The purpose of this thesis is to provide an optimal and online flexible launch vehicle guidance algorithm and method under the occurrence of a random failure in the propulsion system in order to inject the satellite in the nominal orbit/the closest orbit to the nominal orbit. In addition, by recognizing the effects caused by the fault in the propulsion system on the flight dynamics of the launch vehicle, appropriate guidance decisions are applied in analyzes and calculations, and the flexible launch vehicle, according to the amount of error and the time of occurrence of the error and the amount of time left to reach the rated orbit, reaches the nominal orbit or the closest orbit to the...