Sharif Digital Repository

The present study is work on fabrication and characterization of a chitosan/ gelatin/ Mg substituted hydroxyapatite nano composite scaffold for bone tissue engineering. At the first step pure and Mg-substituted hydroxyapatite (HA) (Ca10-xMgx(PO4) 6OH2) nano-hexagonal rods with 14–45 nmdiameter.for this, calcium nitrate, magnesium phosphate hydrate and potassium dihydrogenphosphate were used as precursors for Ca, Mg, and P, respectively. Calculated amounts of magnesium ions (Mg+2) especially from 0 to 8% (molar ratio) were incorporated as substituted into the calcium sol solution. Deionized water was used as a diluting media for HA sol preparation and ammonia was used to adjust the pH= 9.... 

In this research copper oxide ores were dissolved under acidic condition. Chemical analysis (XRF) and X-Ray diffraction analysis (XRD) were used to identify the phases and determine the percentage and amount of the elements in the mineral. The results showed that the mineral contains 4.464% by weight of copper, which is malachite in mineral. The experimental design method (DOE) was used to dissolve concentrate by sulfurice acid. The parameters of temperature, time, acid concentration and solid to liquid ratio, as well as the interaction of these parameters on leaching and optimization of parameters were also done by response surface method (RSM). To determine the amount of copper dissolved,... 

Today, users can easily access network and Internet services from anywhere, anytime, using mobile computing devices, such as laptops, tablets, smartphones, and so forth This trend has diversified users and their need for network protocol-based services, including VoIP. VoIP is an Internet protocol for voice transmission and reception, which has become one of the biggest challenges in today's world of communications and telecommunications. Analyzing and evaluating the quality of network service (QoS) in VoIP traffic is an essential part of the process of ensuring and improving the quality of multimedia networks. Therefore, monitoring and measuring "users’ satisfaction" toward voice... 

Due to the environmental concern for the harmful effect of the release of HFCs on global warming there has been more interest for the use of hydrocarbons as refrigerants in recent years. In this project the performance of these refrigerants have been studied and compared with common refrigerants from the quantitative and qualitative point of view using a real-scale model of Peugeot-405 air conditioning system. Charging amount, inside temperature, cooling load, energy consumption of cycle, coefficient of performance and required time to steady state condition are the important comparative criteria for such a study. After carrying out a series of tests it has been considered that charge... 

Due to the increasing development of digital systems based on limited energy sources (i.e. battery), energy efficiency has become one of the most important concerns in the design of these systems. The use of multi-core architecture is an effective solution for the problem of reducing energy consumption. Hence using it in digital systems has become more common. In addition, enabling methods for reducing energy consumption on processor, helps in making energy more efficient. DVFS and DPM are the two major methods used for reducing dynamic and static energy consumption of processors. The using of multi-core architecture due to the higher chip density, results the static and dynamic energy... 

The  aim  of  this  work  is  to  investigate  some  theoretical  models  developed  in  recent years for describing electronic correlation and apply them to some special problems  and  metallicity  and  insulating  behavior  of  one  type  of  paramagnetic  systems. One  of  the  vast‐applied  and  effective  routines  for  investigating  the  strongly  correlated electron systems is Dynamical Mean Field Theory (DMFT). In the first part,  the  equations  of  DMFT  are  solved  on  nearly  real  frequency  axis  with  a  effective and more reliable solver a little parameter γ above the real axis. This approach  appears  fine  structures  that  can’t  be  captured  with  the ... 

Multilevel converters are considered recently as one of the industrial solutions for high-power and power quality demanding applications. Casacade H-Bridge (CHB) converter is one of the well known topologies among multilevel converters. CHB converter is characterized by its high modularity allowing its power to be easily increased. Modularity also allows any faulty cell to be isolated, so the load can be fed by the remaining operative cells, which leads to an unbalanced output voltage of the CHB converter. To avoid the unbalanced operation, recently a solution based on modifying the phase and the magnitude of the voltage refereces has been proposed. This thesis presents a method to control... 

This study offers a framework to manage mass vaccination programs in response to an outbreak in a city. Compared to previous studies, we consider more operational challenges in the vaccination process; for example, transshipment between vaccinations units and availability of second doses. Our objective function is based on the risk of unvaccinated individuals. Therefore, the model aims at favoring those places in the city where the risk of unvaccinated people is high. Using different kinds of vaccines is another factor that our mathematical model includes. Vaccines are categorized into single-dose and double-dose classes. In this regard, the balanced access to different vaccine types is of... 

Planing hulls have been under rapid development during recent years and their maximum speed has increased significantly thanks to advancements in high power engines and light weight hull construction methods. In the past two decades, the main concern have been hydrodynamic characteristics and stability of the planing hulls in straight-line motion in calm and rough water, and no applied mathematical model is proposed for their dynamic motions in different maneuvers in contrast to displacement hulls. Moreover, control loss at high speeds is very prevalent and in most cases this leads to economy and human losses. The main target of this thesis is to develop and validate a mathematical model to... 

nowadays, due to population growth, unconventional use of water resources and on the other hand, climate change, limited renewable water resources, reduction of groundwater cavities, the need for water for agricultural use and energy production are increasing. Due to the fact that each cubic meter of dirty water pollutes 40 to 60 cubic meters of clean water and the entry of polluted effluent into the receiving sources of environmental degradation leads to a lot of wastewater treatment, water consumption management and The development of wastewater treatment processes is also becoming increasingly important. At present, wastewater treatment plants face the challenges of high energy... 

Sialons are materials which crystallize in four elements system (Si-Al-O-N). These materials have been widely observed by researchers because of their suitable properties like: high toughness and strength in high temperatures, high resistance to corrosion and stability in thermal shock. Because of these properties,Sialons are anti erosion materials. In this research, by controling the situations, mullite has been synthesized by sol-gel procedure. Then the powder has been ground by ballmill for 12 hours and by spex for 30 minutes. Then the produced powder was mixed with distinct amount of graphite and nano silica and was nitrided in the furnace at 1500 ̊C and was heated for 5 hours. Also... 

Concentrated photovoltaic systems (CPVs) allow simultaneous production of electrical energy and high-temperature thermal energy. These systems consist of a concentrator for collecting solar rays onto the surface of the recipient cells. Moreover, these systems are always facing the sun using a sun tracker. The heat generated by these systems can be used in industrial processes, heating, cooling, and water desalinating. Given the concurrent generation of power and high-temperature heat, it is possible to achieve higher efficiency than that of conventional solar systems. Furthermore, the electrical efficiency is also higher than conventional systems due to the use of multi-junction solar cells... 

Natural gas liquefaction is a gas refrigeration technology, which enables the export of natural gas worldwide, in liquids formed and stored at very low temperatures. In this project, a plate-fin type of heat exchanger, which is used for liquefaction of natural gas (mainly methane) at very low temperatures, has been investigated. The most important and effective part of this gas refrigeration cycle is the cold box heat exchanger. The cold box consists of two or more floors in which some sorts of fins are installed in each floor. In this simulation, the three-sream heat exchanger is designed in such a way that the input temperature of the natural gas is about 200 K and the output is 145 K at a... 

The water and energy demand increase as the population grows. Increased usage of energy leads to scarcity of available resources and limited absorption capacity of environment. Development of efficient and environmentally compatible energy conversion technologies are conceived as an important option for resolving pressing challenges. Compatibility with environment requires considerable reduction in the share of fossil fuels and efficient utilization of renewable energy sources. Hence, development of high-efficiency solar energy systems is becoming an important challenge in the energy sector. The present study is involved with development an integrated solar system based on the application of... 

Existing trend in the world transportation industries have created number of bottlenecks that in some cases have lead to substantial delays. Among which the most important one is the airport and how it is managed. This work investigates a new approach to increase an airport capacity in a procedural manner and without having to invest heavily on the infra-structure. The main objective of the work is to propose a sustainable approach to make use of military airports as a civilian one. In fact, we seek to define a model or process for the two major stakeholders (military airlines, civilian airlines) that guarantees a durable cooperation.Here, we have effectively made use of computer program... 

Conventional methods of solving partial differential equations such as finite difference method, finite volume method, and finite element method require mesh generation in the problem domain. When these methods are applied to solve problems involving shock propagation, crack propagation or deformable domain, or in the case of mesh refinement, multiple mesh regenerations are needed which is laborious and time consuming. In recent years, meshless methods have been developed to avoid difficulties of mesh-based methods. Meshless Local Petrov-Galerkin (MLPG) method is a truly meshless method that does not rely on mesh neither in function approximation nor in the integration of the weak form. In... 

The purpose of designing the foundation is to transfer the load of the structure to the subsoil without creating shear failure and additional settlement in the soil. Therefore, choosing the appropriate bearing capacity is an important point that should be considered in any project. Determining the bearing capacity of foundations is one of the topics that has long been considered by researchers and geotechnical engineering designers. For this reason, its design is not considered a new issue, but the application of new methods and the development of computers, raises new perspectives on this issue that justifies new studies.Most of the recent study, which have done so far on bearing capacity,... 

The number of GPS satellites, which are spent their life and work, have been increasingly on the rise. Hence with knowledge of debris numbers, we can get an estimate of collisions risk probability and functional interference of active satellites in the future time. In this study, by using three methods, least-squares, RBF and ANFIS and statistical data the growth pattern of retired satellite numbers has been expected in the future. Numbers estimated by curve fitting methods in 2014 have been compared to the number of satellites disabled and growth estimation error has been analyzed by two models. Solar activity, the sun's radiation incidence angle on the satellite solar panel and the Earth's... 

The low female labor force participation rate in the Iranian labor market relative to the global average and even to countries that do not differ significantly from the socio-economic characteristics of our country is one of the important questions of the Iranian labor market. In this study, we seek to answer the question of whether the economic participation rate of married women will increase if the gender gaps in wages, job findings and job losses among women and men are eliminated in the Iranian labor market. To answer this question using household expenditure and income data and labor force data, we show that between the two categories of occupations, in terms of the share of women's...