Sharif Digital Repository

The characteristics of a cavitation water tunnel test setup and the experiments of cavitation around a circular cylinder with free stream turbulence are presented in this paper. The Reynolds number of flow is limited in the range of 1.26 × 105 to 3 × 105 and the far upstream flow has free turbulence. Drag force, back pressure, location of cavitation inception, length of cavity and appearance of cavitation are measured or observed and their results are presented here. It was found that the cavitation effects on the boundary layer and separation of flow over the cylinder and drag force become minimum at the cavitation number of 1.94. The cavitation inception occurs in the sub-layer and at an... 

Lithium-ion batteries should continuously be operated at the optimum temperature range (15∼40∘C) for the best performance. Surface temperature monitoring is critical for the safe and efficient operation of the battery. In this study, initially, the electrical parameters of the battery are determined by applying a second-order equivalent circuit model. This model then is integrated with a thermal model based on the temperature dependent behavior of the electrical parameters and the heat generated. The input parameters to the electro-thermal model include the current, the ambient fluid temperature and the output parameters include the terminal voltage, state of charge, cell core temperature... 

The battery management system (BMS) in electric vehicles monitors the state of charge (SOC) and state of health (SOH) of lithium-ion battery by controlling transient parameters such as voltage, current, and temperature prevents the battery from operating outside the optimal operating range. The main feature of the battery management system is the correct estimation of the SOC in the broad range of vehicle navigation. In this paper, to estimate real-time of SOC in lithium-ion batteries and overcome faults of Extended Kalman Filter (EKF), the Square-Root Sigma Point Kalman Filter is applied on the basis of numerical approximations rather than analytical methods of EKF. For this purpose, the... 

Carbon nanotubes can serve as one-dimensional nanoreactors for the in-tube synthesis of various nanostructures. Experimental observations have shown that chains, inner tubes, or nanoribbons can grow by the thermal decomposition of organic/organometallic molecules encapsulated in carbon nanotubes. The result of the process depends on the temperature, the diameter of the nanotube, and the type and amount of material introduced inside the tube. Nanoribbons are particularly promising materials for nanoelectronics. Motivated by recent experimental results observing the formation of carbon nanoribbons inside carbon nanotubes, molecular dynamics calculations were performed with the open source... 

Proton exchange membrane fuel cell (PEM-FC) aggregation pressure causes extensive strains in cell segments. The compression of each segment takes place through the cell modeling method. In addition, a very heterogeneous compressive load is produced because of the recurrent channel rib design of the dipole plates, so that while high strains are provided below the rib, the domain continues in its initial uncompressed case under the ducts approximate to it. This leads to significant spatial variations in thermal and electrical connections and contact resistances (both in rib–GDL and membrane–GDL interfaces). Variations in heat, charge, and mass transfer rates within the GDL can affect the... 

Proton exchange membrane fuel cell (PEM-FC) aggregation pressure causes extensive strains in cell segments. The compression of each segment takes place through the cell modeling method. In addition, a very heterogeneous compressive load is produced because of the recurrent channel rib design of the dipole plates, so that while high strains are provided below the rib, the domain continues in its initial uncompressed case under the ducts approximate to it. This leads to significant spatial variations in thermal and electrical connections and contact resistances (both in rib–GDL and membrane–GDL interfaces). Variations in heat, charge, and mass transfer rates within the GDL can affect the... 

Purpose – This paper aims to describe a structured review framework for managing business performance. The framework entails the review of business performance, including the strategic relevance of the measures, as well as the efficiency and effectiveness of the performance measurement system itself. Design/methodology/approach – A range of approaches and tools are employed in the framework, which features a review card providing a highlevel view of the review process, showing the different types of review perspectives and their interactions. Findings – The performance measurement system of an organisation is a mechanism to manage and control the organisation. Maintaining the effectiveness... 

An experimental investigation has been carried out to verify characteristics of pressure fluctuations inside a circular, horizontal and inclined pipeline (90mm inside diameter and 10 m long) carrying two-phase air-water flow in a controlled manner (operating at room temperature and normal pressure). The pressure fluctuation was considered to be due to interaction between the fluid and air bubble compressibility in the pipe. The fluctuating pressure was studied in detail while the flow pattern was mainly slug, wavy or stratified flow. The tests were carried out varying with time, space, water flow rate/air flow rate ratio and pipe inclination. The pressure fluctuations were measured... 

Transcritical-CO2, supercritical-CO2, and organic Rankine cycles are numerically investigated and compared in simple Rankine, Rankine with internal heat exchanger, and regenerative Rankine configurations to assess their thermodynamic and thermoeconomic performance indicators. Subsequently, the systems are optimized using a multi-objective optimization method. Pareto optimal solutions are provided to present the trade-off between thermodynamic and thermoeconomic indicators. In addition, scatter plots of decision variables are presented to ascertain the optimal operating range of input variables. The results show that transcritical-CO2 systems can generate the highest power. The levelized cost... 

In this paper, we propose an optimal control technique for a class of continuous-time nonlinear systems. The key idea of the proposed approach is to parametrize continuous stale trajectories by sequences of a finite number of intermediate target states; namely, waypoint sequences. It is shown that the optimal control problem for transferring the state from one waypoint to the next is given an explicit-form suboptimal solution, by means of linear approximation. Thus the original continuous-time nonlinear control problem reduces to a finite-dimensional optimization problem of waypoint sequences. Any efficient numerical optimization method, such as the interior-reflection Newton method, can be... 

There have been many previous works to determine the determinants of housing prices. All of these works relied on a relatively small set of data, mostly collected with the help of real estate agencies. In this work, we used web mining methods to generate a big, organized dataset from a popular national brokerage website. The dataset contains structural characteristics of more than 139,000 apartments, alongside their location and price. We provided our full dataset for the article, so that other researchers can reproduce our results or conduct further analyses. Using this dataset, we analyzed housing prices of Tehran in order to identify its major determinants. To this aim, we examine the... 

In the last decades, numerous attempts have been made to prevent microbial pollution spreading, using antibacterial agents. Zeolitic imidazolate framework-8 (ZIF-8) belongs to a subgroup of metal organic frameworks (MOFs) merits of attention due to the zinc ion clusters and its effective antibacterial activity. In this work, Ag-doped magnetic microporous γ-Fe2O3@SiO2@ZIF-8-Ag (FSZ-Ag) was successfully synthesized by a facile methodology in room temperature and used as an antibacterial agent against the growth of the Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus bacteria. Several characterization methods were applied to analyze the properties of the materials, and the... 

To meet stringent emission standards stipulated by regulatory agencies, the oil industry is required to bring down the sulfur content in fuels. Oil supplies 38% of the worldwide energy, and as the light oil is limited and meanwhile the energy demand is increasing, it is a must to use heavy crude oil and therefore desulfurize it to meet environmental standards. As it is not feasible to desulfurize all the sulfur containing compounds of heavy crude oil by the existing methods (such as hydro-desulfurization) we have focused on biodesulfurization of heavy crude oil. We have isolated the first native fungus which has been identified as Stachybotrys sp. and is able to remove sulfur and nitrogen... 

Background: To meet stringent emission standards stipulated by regulatory agencies, the oil industry is required to bring down the sulfur content in fuels. As some compounds cannot be desulfurized by existing desulfurizing processes (such as hydrodesulfurization, HDS) biodesulfurization has become an interesting topic for researchers. Most of the isolated biodesulfurizing microorganisms are capable of desulfurization of refined products whose predominant sulfur species are dibenzothiophenes so biocatalyst development is still needed to desulfurize the spectrum of sulfur-bearing compounds present in whole crude. Results: The first desulfurizing bacterium active at 60 °C has been isolated,... 

Ogee spillway with lateral stepped chutes is a kind of compound spillway which, the energy dissipates due to spillway, turbulence in lateral step chutes and jets impact. Therefore, beside extra energy loss respect to conventional spillways, the Froude number at the foot of the spillway reduces dramatically comparing with the ordinary spillways and a smaller stilling basin is needed with reduced dimensions. In this study the performance of experimental model of this kind of spillway with two opposite symmetrical lateral chutes with different slopes and roughness has been studied. Five different widths for downstream channel (or chute slope), three different kinds of chute roughness (with... 

Wireless sensor networks (WSNs) are composed of hundreds or thousands of small nodes, which work together and associate with a specific task or tasks to do. It is expected that wireless sensor networks will be used widely in many applications in the near future. One of the most important issues in WSNs is localisation. There are crucial problems over network localisation such as security attacks (internal or external), energy efficiency, and accuracy, which impact performance and energy-consuming of wireless sensor networks. The main source of these problems is network topology. A long-thin network topology (LTNT) in wireless sensor can produce errors in network localisation due to special... 

An experimental study on the onset of nucleate boiling (ONB) is performed for water annular flow to provide a systematic database for low pressure and velocity conditions. A parametric study has been conducted to investigate the effect of pressure, inlet subcooling, heat and mass flux on flow boiling. The test section includes a Pyrex tube with 21 mm inner diameter and a stainless steel (SS-304) rod with outer diameter of 6 mm. Pressure, heat and mass flux are in the range of 1.73 < P < 3.82 bar, 40 < q < 450 kW/m2 and 70 < G < 620 kg/m2 s, respectively. The results illustrate that inception heat flux is extremely dependent on pressure, inlet subcooling temperature and mass flux; for example... 

Adsorption ability of prepared magnetic nanoparticles supported on activated carbon (AC-MNPs) was evaluated to synthesize an efficient and a low cost adsorbent for removal of Pb(II) and Cr(VI) ions from single and binary component aqueous solutions in the presence of salinity. Magnetic adsorbent was prepared by co-precipitation over activated carbon derived from almond shell by physical activation method. AC-MNPs was modified by oxygen containing functional groups to enhance the adsorption capacity of adsorbent. XRD, XPS, BET, Boehm, TEM, FT-IR, DLS and XRF were used to characterize the AC@Fe3O4@SiO2-NH2-COOH. Characterization analyses indicated the high dispersion of Fe3O4 crystallites on... 

Al86Ni10MM4 (MM: Mischmetal) amorphous ribbons were prepared by melt spinning on a child copper wheel. Non-isothermal crystallization kinetics of the amorphous alloy was studied by differential scanning calorimetry (DSC). The crystallized phases were determined by X-ray diffraction method and transmission electron microscopy. DSC traces were analyzed by Kissinger method to determine the apparent activation energy of crystallization. Changes in the activation energy (Eα) with progression of crystallization were also evaluated by differential iso-conversional method of Friedman. For the precipitation of nanometer-sized Al particles, the activation energy slightly increased with increasing the...