Loading...
Search for:
gerashi--ehsan
0.125 seconds
Total 177 records
Investigation into the Effect of Adding Sr on Microstructure, Mechanical Properties and Biodegradability Behavior of Biodegradable Mg-Zn-Sr Alloys
, M.Sc. Thesis Sharif University of Technology ; Alizadeh, Reza (Supervisor)
Abstract
Biodegradable implants are new generation of implants that require no secondary surgery for their removal. Mg exhibits a great potential to be used as the biodegradable implant. However, mechanical properties and biocorrosion behavior of Mg are not suitable for being used as biodegradable implants. In this study, effects of Sr additions, heat treatments (T4 and T6), and multi-directional forging on the microstructural evolution, mechanical properties and biocorrosion behavior of Mg-4Zn-xSr alloys, and also the effect of hydrothermal coating on the biocorrosion behavior of Mg-4Zn-0.3Sr alloy were investigated. Potentiodynamic polarization and hydrogen evolution methods were used to...
Improved corrosion resistance and mechanical properties of biodegradable Mg-4Zn-xSr alloys: effects of heat treatment, Sr additions, and multi-directional forging
, Article Journal of Materials Research and Technology ; Volume 20 , 2022 , Pages 3363-3380 ; 22387854 (ISSN) ; Alizadeh, R ; Mahmudi, R ; Sharif University of Technology
Elsevier Editora Ltda
2022
Abstract
The effects of Sr additions, heat treatment (T4 and T6), and multi-directional forging on the microstructural evolution, mechanical properties and biodegradability of Mg-4Zn-xSr alloys were investigated. Corrosion behavior of the alloys was evaluated by the polarization and hydrogen evolution tests. Shear punch and hardness tests were employed to determine the mechanical properties. It was found that mechanical properties and corrosion resistance of the as-cast Mg-4Zn alloy increased by 0.3 wt% Sr addition. However, further increasing the Sr content not only did not improve the mechanical strength, but also had detrimental effects on the corrosion resistance, due to the increased size and...
Effect of crystallographic texture and twinning on the corrosion behavior of Mg alloys: A review
, Article Journal of Magnesium and Alloys ; 2021 ; 22139567 (ISSN) ; Alizadeh, R ; Langdon, T. G ; Sharif University of Technology
National Engg. Reaserch Center for Magnesium Alloys
2021
Abstract
Magnesium and its alloys have gained significant popularity due to their light weight and their potential for use as bioresorbable materials. However, their application is limited in practice due to their relatively poor corrosion resistance. Several methods are available for improving the corrosion resistance of Mg alloys for bio-applications such as using different coatings, alloying, and modifying the microstructural parameters such as the grain size and the crystallographic texture. This review provides a comprehensive summary of the effects of crystallographic texture and twinning, as one of the most important deformation mechanisms of Mg and Mg alloys, on the corrosion behavior....
Effect of crystallographic texture and twinning on the corrosion behavior of Mg alloys: A review
, Article Journal of Magnesium and Alloys ; Volume 10, Issue 2 , 2022 , Pages 313-325 ; 22139567 (ISSN) ; Alizadeh, R ; Langdon, T. G ; Sharif University of Technology
National Engg. Reaserch Center for Magnesium Alloys
2022
Abstract
Magnesium and its alloys have gained significant popularity due to their light weight and their potential for use as bioresorbable materials. However, their application is limited in practice due to their relatively poor corrosion resistance. Several methods are available for improving the corrosion resistance of Mg alloys for bio-applications such as using different coatings, alloying, and modifying the microstructural parameters such as the grain size and the crystallographic texture. This review provides a comprehensive summary of the effects of crystallographic texture and twinning, as one of the most important deformation mechanisms of Mg and Mg alloys, on the corrosion behavior....
Effects of Sr additions on the microstructural stability and mechanical properties of a cast Mg–4Zn alloy
, Article Materials Science and Engineering A ; Volume 843 , 2022 ; 09215093 (ISSN) ; Asadollahi, M ; Alizadeh, R ; Mahmudi, R ; Sharif University of Technology
Elsevier Ltd
2022
Abstract
The effects of Sr additions (0.3, 0.6 and 0.9 wt%) on the microstructural evolution, thermal stability, and mechanical properties of a cast Mg–4Zn alloy were investigated. The extent of grain growth and stability of the intermetallic compounds were studied by optical and scanning electron microscopy (SEM), respectively. Mechanical properties of the studied alloys were evaluated by shear punch testing (SPT) method and also the hardness test. Hardness and shear strength of the base alloy were increased by Sr additions in the as-cast condition, due to the grain refinement effect of Sr and also presence of the Sr-containing Mg17Sr2 and Mg70Zn25Sr5 precipitates. However, the optimum amount of Sr...
Effects of hydrothermal coating on the degradation behavior and biocompatibility of an Mg–4Zn–0.3Sr alloy
, Article Materials Letters ; Volume 330 , 2023 ; 0167577X (ISSN) ; Jamalpour, M ; Alizadeh, R ; Labbaf, S ; Mahmudi, R ; Sharif University of Technology
Elsevier B.V
2023
Abstract
Hydrothermal method was applied to create a protective coating on the Mg–4Zn–0.3Sr alloy, using de-ionized water (as precursor) for different synthesizing times of 3, 4, 5, and 6 h. XRD and EDS line-scan confirmed formation of Mg(OH)2 coating. Based on the surface morphological appearance, 5 h coating time at 160 °C was found to be the optimum condition. The corrosion current of 2.58 µA/cm2 in the uncoated sample decreased to 0.48 µA/cm2 in the coated condition. Also, the cytotoxicity assessments using Alamar blue test showed that the cell viability and cell attachment to the formed Mg(OH)2 coating are more pronounced in comparison with the uncoated alloy. © 2022 Elsevier B.V
Effects of heat treatment on the corrosion behavior and mechanical properties of biodegradable Mg alloys
, Article Journal of Magnesium and Alloys ; Volume 10, Issue 7 , 2022 , Pages 1737-1785 ; 22139567 (ISSN) ; Alizadeh, R ; Gerashi, E ; Asadollahi, M ; Langdon, T. G ; Sharif University of Technology
National Engg. Reaserch Center for Magnesium Alloys
2022
Abstract
Biodegradable magnesium (Mg) alloys exhibit great potential for use as temporary structures in tissue engineering applications. Such degradable implants require no secondary surgery for their removal. In addition, their comparable mechanical properties with the human bone, together with excellent biocompatibility, make them a suitable candidate for fracture treatments. Nevertheless, some challenges remain. Fast degradation of the Mg-based alloys in physiological environments leads to a loss of the mechanical support that is needed for complete tissue healing and also to the accumulation of hydrogen gas bubbles at the interface of the implant and tissue. Among different methods used to...
Genco's Bidding Strategy in Day-Ahead Energy Market Considering Demand Response
, M.Sc. Thesis Sharif University of Technology ; Ehsan, Mehdi (Supervisor)
Abstract
Since 1980s the electricity market has been gradually evolving from a monopoly market into a liberalized one for encouraging competition and improving efficiency. This brings the opportunity for generation companies (Gencos) to make more profits while embracing more risks of not being dispatched. Therefore, it has become a core interest for the Gencos to develop optimal bidding strategies to maximize the profits and minimize the risks while participating in such a competitive market. Error of determining day-ahead electricity price is one of the sources of the risk. Energy price has a high impact on bidding strategy optimization process. So it should be determined with low error which is not...
Multi Objective Distributed Generation Planning in a Flexible Environment
, Ph.D. Dissertation Sharif University of Technology ; Ehsan, Mehdi (Supervisor)
Abstract
The process of deregulation that has involved electricity many markets has introduced several new interesting research topics in power system area. This thesis addresses one of the most fascinating issues among them: the study of distributed generation both renewable and conventional integration in distribution networks. From the distribution network operator (DNO)'s point of view, it is of interest to develop a comprehensive methodology which considers various distributed generation technologies as an option for supplying the demand in distribution networks. In this thesis, the planning problem has been multi-objectively modeled. This will help the planner in decision making while knowing...
, M.Sc. Thesis Sharif University of Technology ; Ehsan, Mehdi (Supervisor)
Abstract
Losses are unavoidable in any parts of power systems, from generation to receiving nodes and occur in transmission and distribution networks. However, the main loss component is produced in distribution networks. Energy losses in distribution networks are about 70% of technological transport energy losses.
Energy losses in distribution networks are an important indicator for the planning and operation of the system. A fast, reliable and accurate energy loss calculation method is required for optimal operation of the distribution networks.
Energy loss depends on network's operating conditions. Loads values and loads factors are time variables; therefore, methods based on probability...
Energy losses in distribution networks are an important indicator for the planning and operation of the system. A fast, reliable and accurate energy loss calculation method is required for optimal operation of the distribution networks.
Energy loss depends on network's operating conditions. Loads values and loads factors are time variables; therefore, methods based on probability...
Methods of Clearing Reactive Power Market and Cost Allocation in Pool Structure
, M.Sc. Thesis Sharif University of Technology ; Ehsan, Mehdi (Supervisor)
Abstract
Restructuring and privatization in power system such as any industry leads to better market operation and more social welfare. Since two decade the power system in many countries have changed from monopoly to free market. In a restructured network the technical and economical aspects should be considered together. Ancillary services are needed for any power system to be operated in an optimal and secure manner. Reactive power and voltage regulation is one of the most important ancillary services in the network. this service should be supplied by its providers through a competitive market and system operator determines the optimal dispatch among different bids. The cost of purchasing reactive...
Dynamic Security Assessment in Restructured Power Systems
, Ph.D. Dissertation Sharif University of Technology ; Ehsan, Mahdi (Supervisor)
Abstract
This thesis addresses the problem of dynamic security assessment in power sys-tems with an emphasis on its application in restructured power systems and issues arising in its applications. The new electric utility environment has an immedi-ate consequence of emphasis on reliability and secure operation of power systems. This requires faster and more precise methods to assess the dynamic aspect of se-curity. On the other hand, this issue is becoming challenging when the determined dispatch might not be accommodated due to violation of the limits.This thesis addresses the problem of dynamic security assessment in power sys-tems with an emphasis on its application in restructured power systems...
Optimal Sizing and Operation of CHP Based on Stochastic Programming
, M.Sc. Thesis Sharif University of Technology ; Ehsan, Mehdi (Supervisor)
Abstract
CHP (Combined Heat and Power) generates electricity and thermal energy simultaneously from input fuel. Since it has high energy efficiency and low installation time, it is an appropriate approach in energy management of residential complexes. In this project, stochastic programming based on Monte Carlo approach is used to handle uncertainties in the optimal sizing of CHP for residential complexes. Availability of CHP, boiler and AC bus as well as the electrical and thermal load forecast errors are considered as stochastic variables. Minimizing system total cost considering the probability of each scenario obtained from the scenario reduction algorithm is the objective function. The system...
Planning of Energy Storage Systems with the Main Goal of Managing the Output Power of Wind Farms
, M.Sc. Thesis Sharif University of Technology ; Ehsan , Mehdi (Supervisor)
Abstract
Uncertain fuel prices and also global climate changes are accompanied by some state initiatives such as renewable portfolio standards (RPS). This has caused a fast growth in the amount of renewable energy installed worldwide especially wind energy over last decades. However, the intrinsic characteristics of wind farms output power, i.e. intermittency and volatility of wind speed along with being non-dispatchable in output generation of wind turbine raises many new technical and financial challenges for power system operators and planners. Up to these issues, large level of wind power penetration causes a growing concern in wind energy curtailment issue which the wind farm’s operator may be...
Retailer’s Medium-term Planning in Distribution Network Considering Uncertainty and Competitive Enviroment
, Ph.D. Dissertation Sharif University of Technology ; Ehsan , Mehdi (Supervisor)
Abstract
Electricity retailers are one of the power market entities which act as an intermediary between the producers in the wholesale market and the consumers in the retail side. The main task of a retailer in the power market is to set contract with the consumers to supply their electricity during a pre-specified time period and to participate in the wholesale market to supply the electricity needed by its costomers. Retailer’s contract with its customers may be a simple contract with a fixed pre-determined energy price or include some more complicated feathures such as involvement of a percent of green energy or variable price and demand response contracts. Moreover, retailer can supply its...
Scheduling of Retailers Performance in Electrical Energy Markets with Energy Production;Sell in Pool Market; and Demand Response Policies
, M.Sc. Thesis Sharif University of Technology ; Ehsan, Mehdy (Supervisor)
Abstract
Recent years of capitalism bold role and the competitive environment of variant fields of our life, sparking the idea which considers the electricity (one of the most crucial human requirement) as a commodity of a competitive market to be traded between confident subscribers by easy access. Therefore, by converting the exclusive structure of electricity supply system to a competitive one, some new roles are created to fulfill the electricity generation, transmission and distribution processes. Retail is one of the new roles, defined as a power system restructuring development helper by support of electricity trading, which can be involved in different transactions according to the market...
Linked Planning of Power Grids and Subsidy Policies on Using Photovoltaic Cells for Residential Electricity Supply
, M.Sc. Thesis Sharif University of Technology ; Ehsan, Mehdi (Supervisor)
Abstract
In recent years, due to restructuring in the electric power industry, distributed generation has become one of the most important subjects and DGs and renewable energy sources have been increasingly expected as a supplement and an alternative to a conventional large scale central power system. their success depends not only on the distribution of the available renewable energy sources in a region but also on the power grids connectable capacity in the area. Photovoltaic system is one of the best RESs for residential electricity supply because it is noiseless and solar power is widely available and households can use it via photovoltaic cells in their homes. There are two major problems...
Bidding and Offering Strategy of Hybrid Electric Companies in Day-ahead Energy Market
, Ph.D. Dissertation Sharif University of Technology ; Ehsan, Mehdi (Supervisor)
Abstract
This Thesis presents a new approach for determining the day-ahead bidding strategies of a hybrid electric energy company. The company has both energy generation and energy retailing businesses in a competitive electricity market. Demand response programs are also considered in the retail side of the company in order to hedge the risk of participation in wholesale market. Price-taker and price maker companies are considered in this thesis separateky.For the price-taker hybrid structure, the predivtion of day-ahead prices are used to evaluate the optimum bidding and offering strategies. Also, day-ahead market price uncertainty is modeled, using non-probabilistic Information Gap Decision Theory...
Security Constrained Unit Commitment With Natural Gas Transmission Delivery Constraints
, M.Sc. Thesis Sharif University of Technology ; Ehsan, Mahdi (Supervisor)
Abstract
Natural gas power plant installed in power system as rapid start unit. In the recent decades, with increasing in the number of gas generating units in the world, consideration of natural gas transmission network in optimal solution of security-constrained unit commitment (SCUC) become a non-negligible problem. The gas transmission grid constraints integrated into the scheduling of thermal units in the proposed model for minimizes power system operating cost. In a power plant transmission of natural gas to power plant is very important because congestion in natural gas pipeline increases. This model could consider natural gas storage tank in gas transmission network as decision variable....