Sharif Digital Repository

In the realization of adaptive beamforming algorithms, the least-mean-squares (LMS) algorithm had been the most popular scheme used for Smart Antenna systems. This Paper proposes an alternate scheme in the form of the Normalized LMS (NLMS) algorithm with active tap detection for WCDMA systems. By taking advantage of spatial filtering, the proposed scheme promises to reduce the bandwidth required for transmitting data by improving convergence rate. The performance of the Frequency Domain NLMS algorithm in the presence of multipath effects and multiple users is analyzed using simulations. This analysis is compared to that of LMS algorithm and suggests improvement in the convergence rate and... 

Past earthquakes had shown vulnerability of infill walls especially under out of plane (OOP) loading. Although some new infill walls show a good OOP performance, generally, they do not have the right economic justification or have complexity in construction. Therefore, in this paper, an innovative economical infill wall is presented that is not complicated in construction. The proposed wall constructed by light expanded clay aggregate in especial shape that reinforced with side plates, top, and bottom rebars. Experimental and numerical studies were carried out to investigate its seismic performance. Experimental results showed a high continuity between blocks of wall due to its especial... 

Steel plate shear walls (SPSWs) have shown a desirable performance in experimental studies and past earthquakes. The advantages of the SPSW and its good performance against lateral loads persuade designers to utilize the system in their practical projects. Some important aspects of the SPSW have remained unknown in spite of valuable experimental and numerical studies. One of these unknown characteristics is the effect of cracks on the SPSW behavior. Several experimental studies have reported fracture in SPSW due to crack propagation during testing, but the experimental studies have not investigated the crack effect. Due to low thickness of steel plate and inherence of crack, the crack... 

In spite of existing comprehensive studies on the behavior of steel plate shear wall (SPSW), some aspects of the SPSW have remained unknown, yet. One of the important aspects that is unknown is the crack effect on the SPSW behavior in linear and nonlinear zones. Some experimental studies have been reported that SPSWs were fractured due to crack propagation. Therefore, the crack effect on the behavior of SPSW should be accounted in considering of SPSW behavior. Although the effect of crack on the thin SPSW has been investigated to a limited extent numerically, stiffened SPSPW, especially diagonally stiffened SPSW, has not been studied. In doing so, in this paper, the effect of crack effect on... 

Concentrically braced structures are one of the most common resistant systems in steel structures due to their high stiffness and lateral strength. However, when these structures are subjected to moderate and severe earthquakes, their compression member begins to buckle. Also, buckling of compression members in Concentrically Braced Frames (CBFs) decreases ductility and degradation of the hysteresis curve. Numerous studies have been performed to improve the behavior of CBFs. Using steel dampers is considered one of the appropriate ways to improve the behavior of CBFs. Although steel dampers improve the hysteretic behavior of the CBFs, they impose additional costs on structures. Therefore, in... 

Current seismic design codes use lateral load distributions that do not consider 3D structural behavior, nonlinear structural state, and soil-structure interaction. Moreover, calculated seismic force does not reflect the energy content of the earthquake and record-to-record variability in its lateral distribution. This research proposes a new design procedure for steel structures that reach nonlinear state to address the mentioned shortcomings. First, nine 3D 6-story steel structures in 3 different soil types and three different structural systems are analyzed under 12 earthquakes for each soil type. Soil-structure interaction is taken into account using the cone model. Then, the general... 

Passive steel dampers have shown favorable performance in last earthquakes, numerical and experimental studies. Although steel dampers are more affordable than other types of damper, they are not economically justified for ordinary buildings. Therefore, in this paper, an innovative steel damper with shear yielding mechanism is introduced, which is easy to fabricate also can be easily replaced after sever earthquakes. The main goal of implementing such a mechanism is to control the possible damage in the damper and to ensure the elastic behavior of other structural components. The numerical results indicate an enhancement of the hysteretic behavior of the concentrically braced frames... 

This study investigates the roll decay of a fishing vessel by experiments and computational fluid dynamics (CFD) simulations. A fishing vessel roll decay is tested experimentally for different initial roll angles. The roll decay is also simulated numerically by CFD simulations and is validated against the experimental results. It shows that the roll damping could be obtained by CFD with high level of accuracy. The linear and nonlinear damping terms are extracted from the CFD roll decay results and are used in a potential-based solver. In this way we are using a hybrid solver that benefits the accuracy of the CFD results in terms of roll damping estimation and the fast computations of the... 

In this study, Lipase from Aspergillus Niger after extraction of medium culture was precipitated with different percentages of acetone and purified by ion exchange chromatography using SP-Sepharose HP and Q-Sepharose HP. The process of purification of the enzyme was studied by electrophoresis and the molecular weight was detected and determined by Zymography using overlying containing phenol red and Rhodamine B. The results showed that the vast majority of lipase from this strain has been precipitated by 70% saturation acetone, and leads to the 1.67 fold the purified enzyme, with special activities 32.8 U. mg-1 and efficiency of 38.5%. Using two-phase chromatography, enzyme specific activity... 

This paper is a counterfactual analysis investigating the consequences of the formation of a currency union for Canada and the USA: whether outputs increase and prices decrease if these countries form a currency union. We use a two-country cointegrated model to conduct the counterfactual analysis, where the conditional forecasts are generated based on the Gaussian assumption. To deal with structural breaks and model uncertainty, conditional forecasts are generated from different models/estimation windows and the model-averaging technique is used to combine the forecasts. We also examine the robustness of our results to parameter uncertainty using the wild bootstrap method. The results show... 

Objectives: This systematic review aims to strengthen the relationship between architecture and neuroscience by classifying data measurement techniques in the field of neuroarchitecture with a focus on the most practical and common methodological approaches. It classifies data recording techniques in different architectural categories (e.g., interior, urban, built environment). Backgrounds: With regard to urban life developments and technological breakthroughs, studies of human interactions with environments have been expanding in recent years. Additionally, recent advances in neuroscience have allowed architects to find out more about human experiences in built environments, but there are...