Sharif Digital Repository

Heavy and extra heavy crude oils usually have a high weight percentage of asphaltene, which could induce many problems during production to refining processes. Also, asphaltene has the main role on the high viscosity of the heavy and extra heavy crude oils. In this paper, the effects of asphaltene characteristics on the crude oil rheological properties have been experimentally and theoretically investigated using different classes of the suspension models. For experimental investigation, the asphaltene was first precipitated from the original heavy crude oil and then 10 well-defined reconstituted heavy oil samples are made by dispersing the asphaltene into the maltene (i.e., deasphalted... 

The highly viscous property of heavy oil often causes problems in its transportation in pipelines. Mixing heavy oil with light oil as well as ultrasound treatment are viable solutions to this problem. In this study, extra heavy crude oil samples were first diluted with 0, 0.05, 0.1, and 0.15 mL/mL (0, 5, 10, and 15 vol%) of a light crude oil; then the mixture was irradiated by ultrasonic waves for 0, 5, 10, 15, and 20 min; finally the viscous shear functions of all mixtures was measured at different values of shear rate at different temperature levels. The results revealed that the minimum viscosity of the diluted extra heavy crude oil samples was obtained at 10 min of ultrasonic... 

In the present work, a fuzzy supervisory control approach combined with an adaptive model predictive controller (AMPC), has been proposed to maximize the productivity of an anaerobic digestion (AD) process, while keeping the operation stable. In the proposed hierarchal control strategy, the set-point of the inner loop is provided by a supervisory controller. In the inner loop an AMPC has been applied to achieve the desired methane production rate by manipulating the feed flow rate. The AMPC is designed based on the auto-regressive moving average (ARMA) model whose parameters are updated at each sampling time to make the controller more robust against uncertainties and external loads. In the... 

The authors regret Acknowledgement: The authors would like to express his gratitude to Iran National Science Foundation (INSF) for supporting this research under grant number 92037628. The authors would like to apologise for any inconvenience caused. © 2019 Elsevier B.V  

The COVID-19 epidemic is spreading day by day. Early diagnosis of this disease is essential to provide effective preventive and therapeutic measures. This process can be used by a computer-aided methodology to improve accuracy. In this study, a new and optimal method has been utilized for the diagnosis of COVID-19. Here, a method based on fuzzy C-ordered means (FCOM) along with an improved version of the enhanced capsule network (ECN) has been proposed for this purpose. The proposed ECN method is improved based on mayfly optimization (MFO) algorithm. The suggested technique is then implemented on the chest X-ray COVID-19 images from publicly available datasets. Simulation results are... 

The present study investigated the effect of laser input energy on the quality and mechanical behavior of a 304 stainless steel–polyamide 6 joint in the laser-assisted metal and polymer direct joining (LAMP) method experimentally and numerically. After the proposed heat transfer model was validated, it was determined whether there was an optimal amount of laser input energy that could produce a joint with favorable quality and mechanical behavior. Among different laser input energies used in this study, 28-J/mm energy can provide more uniform and extensive wetting of the metal surface by the polymer, while excessive polymer degradation in the joint zone was prevented. As a result, an optimal... 

Among the factors affecting the efficiency of laser-assisted metal and polymer (LAMP) joints, the surface condition of the joint components is one of the most important ones. So, the present study explored the effect of laser pre-oxidation of stainless steel 304 (SS304), as a novel pretreatment method, on SS304/polyamide 6 joint strength. The assessments revealed that in spite of the potential of surface pre-oxidation of SS304 for improving joint strength, the strength of the joint was reduced by ∼ 25 % in practice because, firstly, the wettability of the metal by the polymer was reduced due to the reduction of heat transfer by the metal in the preoxidized zone and secondly, the oxide layer... 

In this paper, we study theoretically the generation of high repetition rate short pulses using fiber optical parametric amplification. We show that the pulse shape and duration depend on the signal location relatively to the pump frequency. We demonstrate that in order to get the shortest pulse width, the signal must be located at one of the extremities of the gain spectrum associated with the pump peak power. We derive the analytical expression of the pulse shape in this case and compare it to the exponential gain regime case. Using numerical simulations, we also analyze the impact of walk-off and pump phase modulation that is required to suppress Stimulated Brillouin Scattering and derive... 

This paper reports a polarization controllable and angle-insensitive perfect metamaterial absorber (PMA). The proposed PMA consists of periodically arranged asymmetric omega-shaped resonators made of metallic copper. The absorptivity was analyzed considering the microwave C-band from 4 GHz to 8 GHz. The proposed PMA shows an absorption peak with almost 100% absorptivity at 6.2 GHz. Also, wideband negative index of refraction is observed. Further, the absorber is inspected for the different rotation angles of the top metasurface (omega-shaped ring) along the optical axis, and obliquity of incidence angle for both TE and TM polarized waves. Moreover, surface electric field and surface current... 

In cloud computing, services play key roles. Services are well defined and autonomous components. Nowadays, the demand of using Fuzzy inference as a service is increasing in the domain of complex and critical systems. In such systems, along with the development of the software, the cost of detecting and fixing software defects increases. Therefore, using formal methods, which provide clear, concise, and mathematical interpretation of the system, is crucial for the design of these Fuzzy systems. To obtain this goal, we introduce the Fuzzy Inference Cloud Service (FICS) and propose a novel discipline for formal modeling of the FICS. The FICS provides the service of Fuzzy inference to the... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

In the study presented herein, a simple method for laboratory calcite cementation of a reconstituted gravelly sand was presented. This method was used to prepare cemented gravelly sand specimens, which have similar natural characteristics to alluvial deposit of the city of Tehran. The formation and distribution of calcite bonds, as well as the effectiveness of the presented calcite cementation method in increasing interparticle cohesion, as observed in weakly to moderately cemented soil in Tehran, were evaluated by means of chemical analysis, X-ray diffraction technique, and unconfined compressive strength tests. The cementation technique was used to prepare triaxial specimens with calcite... 

Machine-to-Machine (M2M) communication is an important type of communication in the Internet-of-Things (IoT). How to send data in these high-density communications using relay selection can help improve the performance of this type of communication in various applications. In addition, the possibility of simultaneous use of different Radio Frequency (RF) interfaces helps to use the spectrum more efficiently. In this work, we try to further use machine communication RF equipment and improve the average data rate of networks in some applications such as the IoT, which have their own bandwidth requirements. Therefore, we provide an optimization algorithm for relay selection as well as the... 

The development of new technologies has confronted the entire domain of science and industry with issues of big data's scalability as well as its integration with the purpose of forecasting analytics in its life cycle. In predictive analytics, the forecast of near-future and recent past - or in other words, the now-casting - is the continuous study of real-time events and constantly updated where it considers eventuality. So, it is necessary to consider the highly data-driven technologies and to use new methods of analysis, like machine learning and visualization tools, with the ability of interaction and connection to different data resources with varieties of data regarding the type of big...