Loading...
Search for:
ghane--n
0.099 seconds
Total 3246 records
Synthesis and analysis of the properties of ferro-fluids
, Article ICONN 2010 - Proceedings of the 2010 International Conference on Nanoscience and Nanotechnology, 22 February 2010 through 26 February 2010, Sydney, NSW ; 2010 , Pages 91-93 ; 9781424452620 (ISBN) ; Ghane Motlagh, B ; Ghane Golmohamadi, F ; Ghane Motlagh, R ; Rouhani, S ; Sharif University of Technology
2010
Abstract
We report the rheological properties of ferro-fluid (FF) containing iron oxide nano-particles. At first, a FF was synthesized by using chemical co-precipitaton[1]. The microstructure study using SEM revealed that the FF contained nano-particles with the mean particle size of 35nm. The XRD study revealed that we have well crystallized structures of magnetite; they appeared to be approximately single crystalline structures. The rheological results proved that the FF has non Newtonian behavior, it is a shear thinning fluid in all magnetic fields, Moreover, the magnetic field increases the viscosity in a definite shear rate due to the nano-particles agglomerations and formation of chain-like...
Development of a continuous kinetic model for prediction of coke formation in hydroconversion of Marlim crude oil in a slurry-phase reactor
, Article Petroleum and Coal ; Vol. 56, issue. 3 , 2014 , p. 249-256 ; Khorasheh, F ; Sharif University of Technology
2014
Abstract
A Continuous model was developed to describe the kinetics of hydroconversion of Marlim crude oil in a slurry-phase reactor. The model was able to accurately predict the liquid product distributions as well as coke formation. The model contained one temperature-independent and six temperature-dependent parameters.The model parameters were obtained by an optimization procedure using experimental data available in the open literature for reaction temperatures of 440-460°C, hydrogen pressure of 14.7 MPa, liquid hourly space velocity (LHSV) of 0.5 h-1, and a hydrogen to oil ratio of 100 to 1 ft3/bbl. Comparison between experimental and predicted product distributions and coke yields indicated a...
Synthesis of the Graphitic Carbon Nitride/Iron Oxide Nanocomposite
, M.Sc. Thesis Sharif University of Technology ; Sadrnezhad, Khatiboleslam (Supervisor)
Abstract
The g-C3N4/Fe2O3 nanocomposite was produced by the combustion synthesis. The product was characterized by x-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller study (BET), Ultraviolet-visible analysis (UV-vis) and photoluminescence measurement (PL). Effect of iron nitrate on stability and photocurrent density under simulated visible-light irradiation was determined. The highest photocurrent density obtained (4.25 μA/Cm2) was twelve times the pure g-C3N4. This improvement was due to a bandgap decrease, the specific surface area increase, reduction of the electron-hole recombination, and...
Improving Performance and Power Consumption of Optical CMPs Using Inter-core Communication Prediction
, M.Sc. Thesis Sharif University of Technology ; Sarbazi Azad, Hamid (Supervisor)
Abstract
Studying data flows in conventional applications of Multi-Processor System-on-Chips (MPSoCs) denotes that most of these flows are the ones that transfer huge volume of data in inter-core communications. Previous works try to present architecture for interconnection network which some paths with low power and latency are reserved (statically or dynamically). However all of the presented methods are based on subnetworks or mechanism of transferring control messages (to establish a path and tear it down after transmission of data). Optical connections with low cost, low power and high bandwidth are good candidates to reduce power consumption of Network-on-Chips (NoCs). Therefore, using optical...
An opto-electrical NoC with traffic flow prediction in chip multiprocessors
, Article Proceedings - 2014 22nd Euromicro International Conference on Parallel, Distributed, and Network-Based Processing, PDP 2014 ; 2014 , Pages 440-443 ; Arjomand, M ; Sarbazi Azad, H ; Sharif University of Technology
2014
Abstract
Network-on-Chip (NoC) paradigm has emerged as a revolutionary methodology to integrate numerous IP blocks on a single chip. The achievable performance of adopting NoCs is constrained by the performance limitation mainly imposed by the metal wires that are the physical realization of communication channels. According to the International Technology Roadmap for Semiconductors (ITRS) report, new interconnect paradigms providing huge bandwidth is in need for future products. The current wired channels have limited bandwidth, and consequently, they limit the performance enhancements that NoC architectures can provide. Optical interconnects are capable of achieving better performance via...
Fabrication of Monolithic Dye Sensitized Solar Cell Based on Composite Cathode with Platinum Nanoparticles
, M.Sc. Thesis Sharif University of Technology ; Taghavinia, Nima (Supervisor)
Abstract
Increasing of human demanding for energy and limiting of fossil fuels and bio-logical problems, it seems necessary to access new and clean source of ener-gy. For instance, one of these sources of energy is sun. If we can impart from this infinite energy source so health and natural life can be pictured for human. Nanostructure dye sensitized solar cells in compare with other photovoltaic cells are more economical and practical as a result of lower material cost and simpler manufacturing process. In general, a typical dye sensitized solar cell is a sandwich structure based on two transparent conducting oxide (FTO) glasses. The FTO glass substrates are expensive and account for most of...
Kinetic Modeling of Slurry Phase Residue Hydroconversion
, M.Sc. Thesis Sharif University of Technology ; Khorashe, Farhad (Supervisor) ; Kazemeini, Mohammad (Supervisor)
Abstract
Existing processes to improve the quality of heavy oil cuts catalytic converter hydroconversion can be mentioned in the slurry phase. This process is usually done in the temperature 440˚C to 470˚C be a heavy craking led to the production of light weight thermal feed can be more. With more products light, adverse reaction can also lead to the formation of coke be. Coke formation of secondary radical reactions can be feed from cracking of heavy compounds. Coke production is to eliminate or limit the ability of homogeneous catalysts (eg sulfide Molybdium) about 600-1000 ppm disposable food adds to be used. The main role of catalyst in the stable radicals fail thermal compound feed is heavy. The...
Combustion synthesis of g-C3N4/Fe2O3 nanocomposite for superior photoelectrochemical catalytic performance
, Article Applied Surface Science ; Volume 534 , 2020 ; Sadrnezhaad, S. K ; Hosseini H., S. M ; Sharif University of Technology
Elsevier B.V
2020
Abstract
The g-C3N4/Fe2O3 nanocomposite was produced by the solution combustion synthesis (SCS) of iron-nitrate/g-C3N4 mixtures of varying concentration ratios and using urea as a fuel. The following methods did characterization of the products: X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller investigation (BET), ultraviolet–visible light analysis (UV–vis) and photoluminescence measurement (PL). Effect of iron nitrate on stability and photocurrent density under simulated visible-light irradiation was determined. The...
One-pot microwave synthesis of hierarchical C-doped CuO dandelions/g-C3N4 nanocomposite with enhanced photostability for photoelectrochemical water splitting
, Article Applied Surface Science ; Volume 530 , 2020 ; Siavash Moakhar, R ; Soleimani, F ; Sadrnezhaad, S. K ; Masudy Panah, S ; Katal, R ; Seza, A ; Ghane, N ; Ramakrishna, S ; Sharif University of Technology
Elsevier B.V
2020
Abstract
Cupric oxide (CuO) is a semiconductor of choice for photocathode in photoelectrochemical (PEC) applications due to its great sunlight absorption capability. However, photocorrosion is the main drawback of CuO. Herein, CuO/graphitic carbon nitride (g-C3N4) with a unique microstructure, enhanced PEC performance, and considerable photostability is synthesized under microwave irradiation. A facile, one-pot method is utilized to directly deposit the nanocomposite onto fluorine-doped tin oxide from a solution containing copper precursor and urea. Possible mechanism of CuO/g-C3N4 formation through this novel method is investigated. It is elucidated that controlled amounts of urea critically...
Recent activities in science and technology and the progress of women in physics in the last three years in Iran
, Article AIP Conference Proceedings, Stellenbosch ; Volume 1517 , 2013 , Pages 108-109 ; 0094243X (ISSN); 9780735411388 (ISBN) ; Azad, M. T ; Mahmoudi, N ; Izadipanah, N ; Eshghi, N ; Sharif University of Technology
2013
Abstract
For the 4th IUPAP International Conference of Women in Physics, we report on activities in science and engineering in Iran, and conditions for women in physics, in the three years since the 3rd IUPAP International Conference of Women in Physics was held in 2008. Iran has made prominent advancements and astonishing progress in laser technology, biotechnology, nanotechnology, genetics, computer software and hardware, and robotics. Iranian scientists have been very productive in several experimental fields, such as pharmaceutical, organic, and polymer chemistry. Conditions for women in physics have improved greatly in recent years. A project to improve the environment for learning physics, and...
Lead-free MAGeI3 as a suitable alternative for MAPbI3 in nanostructured perovskite solar cells: a simulation study
, Article Environmental Science and Pollution Research ; Volume 30, Issue 19 , 2023 , Pages 57032-57040 ; 09441344 (ISSN) ; Akhavan, O ; Rabiee, N ; Afshar, E. N ; Zare, E. N ; Sharif University of Technology
Springer Science and Business Media Deutschland GmbH
2023
Abstract
The lead is a heavy metal with hazardous impacts on environment and human life. Lead-free perovskite solar cells have attracted much attention in recent years, due to eco-friendly characteristics. Meanwhile, Pb-containing cells showed the highest efficiencies among the various types of cells. Hence, designing novel Pb-free solar cells with comparable or better performance than the Pb-containing ones is highly required. In this work, a lead-free methyl-ammonium-germanium-iodide (MAGeI3)-based perovskite solar cell with ITO/TiO2/MAGeI3/Spiro-OMeTAD/Ag multilayer nanostructure has been proposed and its main characteristics including open-circuit voltage (VOC) and power conversion efficiency (η)...
Ab initio study of electronic effects in the ZnO/TiO2 core/shell interface: Application in dye sensitized solar cells
, Article RSC Advances ; Vol. 4, issue. 1 , April , 2014 , p. 301-307 ; Nafari, N ; Taghavinia, N ; Sharif University of Technology
2014
Abstract
Core/shell structure of ZnO nanowires coated with a monolayer of TiO 2 is investigated using Density Functional Theory (DFT). The electronic states of the semiconductor is calculated and compared before and after coating of the TiO2 monolayer on a ZnO [101 0] surface. The effect of TiO2 coating induce surface states changes and shifts the conduction and valence band edges to higher energies. Our results, in qualitative agreement with the experimental work of Matt Law et al. (J. Phys. Chem. B, 110, 22652), show an increase in open circuit voltage and a decrease in short circuit current in ZnO/TiO2 core shell dye sensitized solar cells. Regarding the semiconductor density of states (DOS), TiO2...
Analyzing factors effective on the development of relationship commitment
, Article Proceedings of the 2012 International Conference on Artificial Intelligence, ICAI 2012, 16 July 2012 through 19 July 2012 ; Volume 1 , July , 2012 , Pages 398-404 ; 1601322186 (ISBN) ; 9781601322180 (ISBN) ; Lotfi, N ; Karami, N ; Sharif University of Technology
2012
Abstract
Due to the important role of commitment and trust in the relationship marketing, the factors which can directly result in a committed relationship along with the factors which can influence the commitment through influencing trust, according to the model of commitment and trust by (Morgan & Hunt, 1994) have been introduced and their level of importance has been investigated here. The article uses fuzzy cognitive maps (FCMs) in the proposed model to find the most important paths leading to relationship commitment. The FCM analyzes the responses of a group of 30 people including general practitioners in dentistry, managers of dental departments in some of the public clinics and hospitals who...
Morphological dependence of light backscattering from metallic back reflector films: Application in dye-sensitized solar cells
, Article Physica Status Solidi (A) Applications and Materials Science ; Volume 212, Issue 4 , January , 2015 , Pages 785-790 ; 18626300 (ISSN) ; Ghazyani, N ; Taghavinia, N ; Sharif University of Technology
Wiley-VCH Verlag
2015
Abstract
Conventionally, a film of TiO2 particles of 300 nm size is employed in Dye-sensitized solar cells (DSCs) as the back reflector film to enhance the light harvesting. Perfect reflectance of silver in visible and near infrared motivates to investigate its potential as the material for the light back reflector film in DSCs. In this study, light back reflector films consisting of 300 nm-sized silver particles, as well as vacuum evaporated silver flat film, were fabricated and compared to 300 nm-sized rutile-type TiO2 particulate reflector film to study their optical aspects. Conventional TiO2 rutile-type particulate film demonstrates slightly lower performance...
Monolithic dye sensitized solar cell with metal foil counter electrode
, Article Organic Electronics ; Volume 57 , June , 2018 , Pages 194-200 ; 15661199 (ISSN) ; Taghavinia, N ; Ghazyani, N ; Sharif University of Technology
Elsevier B.V
2018
Abstract
Monolithic dye-sensitized solar cells are conventionally fabricated using carbon composite layer as the counter electrode. In the current research, the brittle carbon composite layer is replaced with a metal foil, aiming to decrease the device series resistance and using less catalyst material in counter electrode. This metallic structure has also an advantage of mechanical strength and decreases the fabrication complexity. The counter electrode is prepared by electrodepositing Cr film followed by electrodepositing Pt nanoparticles on a metal foil. As the porous spacer layer, different composite layers of SiO2, TiO2, and Al2O3 are investigated and the best results are obtained for TiO2...
A compact versatile microbial fuel cell from paper
, Article ASME 2013 11th Int. Conf. on Fuel Cell Science, Eng. and Technology Collocated with the ASME 2013 Heat Transfer Summer Conf. and the ASME 2013 7th Int. Conf. on Energy Sustainability, FUELCELL 2013 ; 2013 ; 9780791855522 (ISBN) ; Hashemi, N ; Hashemi, N ; Sharif University of Technology
2013
Abstract
Microbial fuel cells (MFCs) have been a potential green energy source for a long time but one of the problems is that either the technology must be used on a large scale or special equipment have been necessary to keep the fuel cells running such as syringe pumps. Paper-based microbial fuel cells do not need to have a syringe pump to run and can run entirely by themselves when placed in contact with the fluids that are necessary for it to run. Paper-based microbial fuel cells are also more compact than traditional MFCs since the device doesn't need any external equipment to run. The goal of this paper is to develop a microbial fuel cell that does not require a syringe pump to function. This...
Decentralized model predictive voltage control of islanded DC microgrids
, Article 11th Power Electronics, Drive Systems, and Technologies Conference, PEDSTC 2020, 4 February 2020 through 6 February 2020 ; 2020 ; Mahdian Dehkordi, N ; Sadati, N ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2020
Abstract
This paper proposes a novel decentralized control approach for islanded direct-current (DC) microgrids (MGs) based on model predictive control (MPC) to regulate the distributed generation unit (DGU) output voltages, i.e. the voltages of the point of common coupling (PCC). A local controller is designed for each DGU, in the presence of uncertainties, disturbances, and unmodeled dynamics. First, a discrete-time state-space model of an MG is derived. Afterward, an MPC algorithm is designed to perform the PCC voltage control. The proposed MPC scheme ensures that the PCC voltages remain within an acceptable range. Several simulation studies have been conducted to illustrate the effectiveness of...
Intelligent optimal feed-back torque control of a 6DOF surgical rotary robot
, Article 11th Power Electronics, Drive Systems, and Technologies Conference, PEDSTC 2020, 4 February 2020 through 6 February 2020 ; 2020 ; Ebrahimi Toulkani, N ; Zhilakzadeh, N ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2020
Abstract
Sophisticated surgeons are widely indicating the use of surgical robots in order to reject human error, increase precision, and speed. Among well-known robotic mechanisms, parallel robots are broadly more investigated regarding their special characters as higher acceleration, speed, and accuracy, and less weight. Specific surgical procedures confine, and restrict their workspace, while controlling and validating the robots are complicated regarding to their complex dynamic. To this end, in this paper, a 6-DOF robot, with rotary manipulators, is designed and controlled. Addressing nonlinearity of parallel robots, an innovative methodology is formulated to robustly penalize the error of...
Semi-Real evaluation, and adaptive control of a 6DOF surgical robot
, Article 11th Power Electronics, Drive Systems, and Technologies Conference, PEDSTC 2020, 4 February 2020 through 6 February 2020 ; 2020 ; Ebrahimi Toulkani, N ; Zhilakzadeh, N ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2020
Abstract
Sophisticated surgeons are widely indicating the use of surgical robots in order to reject human error, increase precision, and speed. Among well-known robotic mechanisms, parallel robots are broadly more investigated regarding their special characters as higher acceleration, speed, and accuracy, and less weight. Specific surgical procedures confine and restrict their workspace, while controlling and validating the robots are complicated based on their complex dynamic. To this end, in this paper, a 6-DOF robot, with linear manipulators, is designed and controlled. Addressing the inherent nonlinearity of the robot mechanism, an adaptive PID manipulator is employed and validated with nonlinear...
Modeling superconductive fault current limiter using constructive neural networks
, Article 2007 IEEE International Symposium on Industrial Electronics, ISIE 2007, Caixanova - Vigo, 4 June 2007 through 7 June 2007 ; 2007 , Pages 2859-2863 ; 1424407559 (ISBN); 9781424407552 (ISBN) ; Sadati, N ; Hosseini, M. N ; Sharif University of Technology
2007
Abstract
Although so many advances have been proposed in the field of artificial intelligence and superconductivity, there are few reports on their combination. On the other hand, because of the nonlinear and multivariable characteristics of the superconductive elements and capabilities of neural networks in this field, it seems useful to apply the neural networks to model and control the superconductive phenomena or devices. In this paper, a new constructive neural network (CNN) trained by two different optimization algorithms; back-propagation and genetic algorithm, is proposed which models the behavior of the superconductive fault current limiters (SFCLs). Simulation results show that the proposed...