Loading...
Search for:
ghasemi--hadi
0.233 seconds
Total 525 records
Modeling and Sliding Mode Control of a Roll-Pitch Seeker
, M.Sc. Thesis Sharif University of Technology ; Nobahari, Hadi (Supervisor) ; Pourtakdoust, Hossein (Supervisor) ; Mohammad Karimi, Hamed (Co-Supervisor)
Abstract
The purpose of this thesis is sliding mode control of a roll-pitch seeker by considering the zenith pass problem. This problem takes place when the target appears in front of the seeker’s head. First, the mathematical model of the roll and pitch frames is obtained by the Newton-Euler equations of motion. Then, a MIMO sliding mode controller is designed. The performance of the controller is investigated in the presence of model uncertainties and seeker disturbances. The results indicate that the designed controller is robust enough and provides a suitable performance in the stabilization, tracking and guidance loops.
Advances in heuristic signal processing and applications
, Book ; Chatterjee, Amitava ; Nobahari, Hadi ; Siarry, Patrick
Springer
2013
Abstract
There have been significant developments in the design and application of algorithms for both one-dimensional signal processing and multidimensional signal processing, namely image and video processing, with the recent focus changing from a step-by-step procedure of designing the algorithm first and following up with in-depth analysis and performance improvement to instead applying heuristic-based methods to solve signal-processing problems. In this book the contributing authors demonstrate both general-purpose algorithms and those aimed at solving specialized application problems, with a special emphasis on heuristic iterative optimization methods employing modern evolutionary and swarm...
Parallelized numerical modeling of the interaction of a solid object with immiscible incompressible two-phase fluid flow
, Article Engineering Computations (Swansea, Wales) ; Volume 34, Issue 3 , 2017 , Pages 709-724 ; 02644401 (ISSN) ; Nikbakhti, R ; Ghasemi, A ; Hedayati, F ; Malvandi, A ; Sharif University of Technology
2017
Abstract
Purpose - A numerical method is developed to capture the interaction of solid object with two-phase flow with high density ratios. The current computational tool would be the first step of accurate modeling of wave energy converters in which the immense energy of the ocean can be extracted at low cost. Design/methodology/approach - The full two-dimensional Navier-Stokes equations are discretized on a regular structured grid, and the two-step projection method along with multi-processing (OpenMP) is used to efficiently solve the flow equations. The level set and the immersed boundary methods are used to capture the free surface of a fluid and a solid object, respectively. The full...
Oscillating pipe flow: High-resolution simulation of nonlinear mechanisms
, Article 2006 ASME Joint U.S.- European Fluids Engineering Division Summer Meeting, FEDSM2006, Miami, FL, 17 July 2006 through 20 July 2006 ; Volume 1 SYMPOSIA , 2006 , Pages 1-10 ; 0791847500 (ISBN); 9780791847503 (ISBN) ; Sharif University of Technology
American Society of Mechanical Engineers
2006
Abstract
A new perspective suitable for understanding the details of nonlinear pumping (formation of traveling shocks) inside a pressurized cavity is constructed in this paper. Full compressible axisymmetric three-dimensional Navier-Stokes equations are used as the starting point to cover all complexities of the problem that exceedingly increase for particular ranges of Mach, Reynolds and Prandtl numbers. Then a very high-order numerical method is introduced to preserve the user-defined order of accuracy for practical simulations. For removal of spurious waves, higher-order compact filters are derived. All equations are marched in time using the classical Runge-Kutta algorithm which is appropriate...
An optimized large-stencil approach for capturing near-PI frequencies
, Article 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, 8 May 2006 through 10 May 2006 ; Volume 5 , 2006 , Pages 3010-3022 ; 1563478099 (ISBN); 9781563478093 (ISBN) ; Sharif University of Technology
American Institute of Aeronautics and Astronautics Inc
2006
Abstract
Large-stencil schemes which their spectral properties are acceptable in the vicinity of ω = π are analyzed for the first time. A machine independent model for evaluating the efficiency of generalized time-marching finite-difference algorithms over periodic domains is developed. This model which is based on operation count reveals that for small values of Total Computational Cost(TCC), the previous low-order small-stencil schemes are more efficient while for moderate TCC, the efficiency of optimized large-stencil schemes abruptly increases. This important result is the motivation for developing optimized large-stencil schemes. The current schemes are successfully implemented in a full...
Numerical solution of high-frequency oscillations of a gas column using a modified lax-wendroff scheme
, Article International Conference on Noise and Vibration Engineering 2006, ISMA 2006, Heverlee, 18 September 2006 through 20 September 2006 ; Volume 4 , 2006 , Pages 2191-2199 ; Sharif University of Technology
Katholieke Universiteit Leuven
2006
Abstract
Recently, several high-order accurate methods have been developed for solving nonlinear equations governing in the high-frequency oscillations of a fluid column. If we assume that the value of Reynolds and Prandtl numbers are high enough then it is possible to neglect the effect of Stokes Layer and it has been previously shown that the calculated pressure profile obtained by solving three-dimensional axisymmetric compressible NS (Navier-Stokes) equations is in good agreement with one-dimensional adiabatic model of Ilinskii. For this particular flow which is the typical of engineering flows inside acoustical compressors, it is clear that high-resolution simulation of NS equations in higher...
Oscillating pipe flow: high-resolution simulation of nonlinear mechanisms
, Article 2006 2nd ASME Joint U.S.-European Fluids Engineering Summer Meeting, FEDSM 2006, Miami, FL, 17 July 2006 through 20 July 2006 ; Volume 2006 , 2006 ; 0791837831 (ISBN); 9780791837832 (ISBN) ; Sharif University of Technology
2006
Abstract
A new perspective suitable for understanding the details of nonlinear pumping (formation of traveling shocks) inside a pressurized cavity is constructed in this paper. Full compressible axisymmetric three-dimensional Navier-Stokes equations are used as the starting point to cover all complexities of the problem that exceedingly increase for particular ranges of Mach, Reynolds and Prandtl numbers. Then a very high-order numerical method is introduced to preserve the user-defined order of accuracy for practical simulations. For removal of spurious waves, higher-order compact filters are derived. All equations are marched in time using the classical Runge-Kutta algorithm which is appropriate...
Development of an Evolutionary Algorithm Based on Surrogate Models to be used in Multi-disciplinary Design Optimization of a Flying Vehicle
, M.Sc. Thesis Sharif University of Technology ; Nobahari, Hadi (Supervisor)
Abstract
In this research, multi-disciplinary design optimization (MDO) of a flying vehicle has been done based on the flight simulation. A meta-heuristic algorithm called Multi-objective Adaptive Real-coded Memetic Algorithm (MARCOMA) has been used for optimization. Since solving a MDO problem is a time consuming process, a RBF neural network has been used in the optimization algorithm as a surrogate model. The new algorithm, called MARCOMA+NN, has been tested with some standard benchmarks. MDO problem has six disciplines consists structure, aerodynamic, propulsion, guidance, control, and fire control. The MDO problem has 31 design variables and two objective functions. The objective functions are...
Optimal Design and Real-time Implementation of a Cooperative Guidance Algorithm against a Flying Vehicle
, M.Sc. Thesis Sharif University of Technology ; Nobahari, Hadi (Supervisor)
Abstract
A cooperative aerial system to defense a Ground Station (GS), against an Incoming aerial Targets (IT) is presented. GS is surrounded by given terrains and a group of homogenous Unmanned Aerial Vehicles (UAVs) are employed using a novel online guidance algorithm in a decentralized manner. The proposed algorithm includes loiter, midcourse and terminal phases. During loiter; UAVs follow an optimal circular path. IT is supposed to approach GS along an optimal low altitude trajectory with respect to the terrains. UAVs are informed the initial position and velocity of IT and they are unaware of IT trajectory. Each UAV decides on whether to engage with IT or not, and shares its decision with other...
Synthesis and Characterization of PVDF Magnetic Nanocomposite
, M.Sc. Thesis Sharif University of Technology ; Forounchi, Massoud (Supervisor)
Abstract
PVDF (polyvinylidene fluoride) magnetic nanocomposite films were prepared by solution casting using two types of nanomagnetic particles: (i) magnetic nanoparticles synthesized by using an alkaline solution of mixed ferrous/ferric salts along with oleic acid as a coating agent at 70˚C; (ii) Fe3O4 nanoparticles prepared by hydrolysis of aqueous solution of ferrous/ferric salts with potassium hydroxide at room temprature. Scanning electron microscopy (SEM) showed that the PVDF magnetic nanocomposite had a porous structure with Fe3O4 nanoparticles dispersed inside the porous polymer matrix. The presence of crystalline magnetite within the polymer matrix was confirmed by X-Ray diffraction method...
Cooperative Search and Localization of Mobile RF Ground Targets, Using a Group of UAVs
, M.Sc. Thesis Sharif University of Technology ; Nobahari, Hadi (Supervisor)
Abstract
In this project, a method for cooperative search and localization of RF ground moving targets by a group of UAVs is developed. It should be noted that UAVs are just equipped with GPS and directional sensors. Since there is fuel constraint for UAVs, they take fuel from a tanker whenever they require. Moreover, searching method enables the UAVs to see different parts of the desired area with almost uniform distribution. In addition, the proposed approach enables the UAVs to perform a local search with the aim of finding the targets having lost their signal during localization mode. Finally, based upon a fueling decision function the UAVs take turn, approach to the fuel tanker, and start...
Attitude Control of a 3DOF Quadrotor Stand Using Intelligent Back-stepping Approach
, M.Sc. Thesis Sharif University of Technology ; Nobahari, Hadi (Supervisor)
Abstract
In this research a novel intelligent back-stepping control method is developed. This method is robust to sensor noise and external disturbances. In addition, the controller is robust under model uncertainty. This controller does not need precise knowledge of system parameters. This method is based on three methods of: back-stepping control, least squares estimation and a fuzzy compensator. This controller is used to control quadrotor stand witch is like an inverse pendulum. In quadrotor stand modeling, the inverse pendulum effect is considered too, witch is one of the innovations of the research. By doing various simulations, the validity of controller is tested. Also the performance of the...
Cooperative Search and Localization of Aerial Targets, Using a Group of Fixed Wing UAVs
, M.Sc. Thesis Sharif University of Technology ; Nobahari, Hadi (Supervisor)
Abstract
Topic that is investigated in this article include identify and localization a number of aerial target penetrating into a protected by area by a swarm of UAVs is fixed wing. UAVs do not have any prior notice of positioning targets. In addition, it is assumed that lacks any radiation exploitable targets and thus use UAVs for Targets Detection from an active radar system. Obviously this article focus on developing a guidance algorithm UAVs to this particular issue and also as the targets participatory is localization algorithm. In addition, extraction type and performance characteristics radar system required and also performance characteristics of the class of UAVs, which is suitable to...
A New Method for Integrated Controller and Observer Design of a Nonlinear System Using Genetic Programming
, M.Sc. Thesis Sharif University of Technology ; Nobahari, Hadi (Supervisor)
Abstract
The purpose of this paper is to design an integrated controller and observer (ICO) for a nonlinear system using genetic programming. ICO is a function that constructs control command directly from the measured state variables of the system. It means that, this function should imitate the behavior of the observer and controller and control the system with acceptable performance in different initial conditions, at the presence of disturbances and system uncertainties. The complexity of this design method, is not related to the complexity of the plant, in fact, the complexity in plant just effects at run time, but the design procedure does not change. So, if exact model of plant exist, using...
Development of Integrated Model of the Wastewater and Organic Solid Waste Flows to Minimize Environmental Impacts and Maximize Energy Recovery for a Residential Building
, M.Sc. Thesis Sharif University of Technology ; Avami, Akram (Supervisor)
Abstract
Nowdays much of the organic solid waste and wastewater is buried using centralized and traditional methods. This leads to many problems, including groundwater pollution, methane emissions into the atmosphere and rapid transmission of disease. In order to avoid these problems, using a decentralized approach can be a good solution. In this study, recovery of organic waste and wastewater of residential buildings using anaerobic digester as a decentralized way, have been examined. Using experiments, the optimum mass ratio of organic solid waste and wastewater is obtained as 80% and 20% respectively. Biogas production model is developed using mass balance and Balance of electrons in redox...
Parallel Multi-disciplinary Design Optimization of a Guided Flying Vehicle
, M.Sc. Thesis Sharif University of Technology ; Nobahari, Hadi (Supervisor)
Abstract
Multi-disciplinary design optimization (MDO) of a surface to air flying vehicle has been done in this research, on the basis of flight simulation. The MDO problem have five disciplines consists of aerodynamic, propulsion, guidance, control, and fire control. Multiple campaign scenarios are defined. The MDO problem has 31 design variables and two objective functions. The objective functions are flying vehicle weight and miss distance. A new meta-heuristic algorithm has been designed to solve multi-objective optimization problems. The new algorithm has been called Multi-objective Adaptive Real-coded Memetic Algorithm (MARCOMA). The MARCOMA can solve large-scale and multi-objective problems and...
Dynamic Modelling and Nonlinear Control of a Hybrid Powered Hexarotor for Precise Trajectory Tracking
, M.Sc. Thesis Sharif University of Technology ; Nobahari, Hadi (Supervisor)
Abstract
In this Thesis, an unmanned multicopter with a new structure is modeled and a nonlinear controller is designed for it to track the trajectories precisely. The multicopter in this thesis, has six propellers with a hybrid propulsion system (a combination of fuel and electric propulsion system) that has the ability to carry more payload and maintain more flight duration compared to electric multicopters. In the beginning, the performance characteristics and technical specifications of the hexacopter are presented. For modeling, first the equations of six degrees of freedom movement of the hexacopter are derived by the Newton-Euler method. In the next step, the forces and torques applied to the...
Theoretical Investigation of Ab-initio MD Approach to Increase the Efficiency and Accuracy of VCD Spectrum Calculation
, M.Sc. Thesis Sharif University of Technology ; Jamshidi, Zahra (Supervisor)
Abstract
Understanding of the Molecules is the main purpose of the chemistry. Ab-initio molecular dynamics (AIMD) as a branch of the computational chemistry, tries to give us a deep comprehension of the molecule, and its chemical, physical and optical activities. This comprehension, relies on the accuracy of quantum mechanics, in addition to the speed of the classical mechanics. The mixing of the quantum mechanics and the classical mechanics could simulate activities of the atoms in the time-domain, provided the mixing is done with precaution. This, in turn, helps us to forecast the response of a molecule in different situations, and also translating the macroscopic phenomena in a nanoscopic...
Developing a Heuristic Filter Utilizing Firefly Optimization Algorithm: A Case Study on State Estimation of a Slung Payload from a Quadrotor
, M.Sc. Thesis Sharif University of Technology ; Nobahari, Hadi (Supervisor)
Abstract
The aim of the present thesis is to develop a novel heuristic filter by utilizing Firefly Optimization Algorithm for state estimation of nonlinear, non-Gaussian systems. The proposed filter formulates the estimation problem as a dynamic, stochastic one. The swarm intelligence of the fireflies enables the filter to find and track the best estimation. To estimate the states of a system, the model of the system is required. Hence, an 8-DoF quadrotor with slung payload system, as a case study, is modeled by the tensor method. In this case, as a highly nonlinear system, in order not to rely on extra sensors for monitoring swing-angle, the estimation of payload states is needed. In this regard,...
Development and Implementation of Multiple Model Filters for Online Identification and Compensation of Atmospheric Disturbances in Automatic Landing of Fixed Wing UAV
, Ph.D. Dissertation Sharif University of Technology ; Nobahari, Hadi (Supervisor)
Abstract
In this study, a multiple model wind estimator is proposed to detect the wind type and to estimate the wind components as well as the states of a fixed-wing UAV without any direct measurement of the air data. Then, the identified wind model and the estimated states are compensated in the heuristic nonlinear model predictive controller during landing phase. For this purpose, a static multiple model approach is taken, comprised of four independent extended Kalman filters, each one is estimating the wind based on one of the four wind models including a constant wind, a “1-cosine” model, a wind shear and a microburst.Moreover, a new heuristic multiple model filter, called Multiple Model Extended...