Sharif Digital Repository

Nano-titania, up to 8 wt%, was added to magnesite–dolomite refractory matrix. The phase and microstructure analyses of samples heated up to 1650 °C for 3 h were studied by XRD and SEM/EDS, respectively. The physical properties are reported in terms of bulk density, apparent porosity, and hydration resistance. In addition, the mechanical behavior was studied by a cold crushing strength (CCS), and flexural strength at 1200 °C test. As a result, it was found that the presence of nano-TiO2 in the magnesite–dolomite matrix induced titanates formation (Mg2TiO4 and CaTiO3), which improved the sintering process. Nano-titania influenced the bonding structure through a direct bonding enhancement. In... 

Dolomite base refractories have advantages such as high refractoriness, potential to produce pure steel molten, high alkaline corrosion resistance, and economical for consumers. However, application of these refractories has been limited due to their high potential to hydration with atmosphere humidity. In this research work, the impact of ZrSiO4 nanoparticles addition on the physical, thermo-mechanical, mechanical, and microstructure of the dolomite base refractories is investigated. Also, XRD and SEM/EDX analyses were used for determining generated ceramic phases and microstructure evaluation, respectively. Up to 3 wt% ZrSiO4 nanoparticles were added to the compositions. Compositions fired... 

Up to 8wt. % of Nano-iron oxide was added to CaO refractory matrix. The crystalline phases and microstructure characteristics of specimens sintered at 1650°C for 5h in an electric furnace were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The physical properties are reported in terms of bulk density, apparent porosity and hydration resistance. The mechanical behavior was studied by a cold crushing strength (CCS) and flexural strength at 1200°C test. As a result, it was found that the presence of Nano-iron oxide in the CaO refractory matrix induced 2CaO.Fe2O3 (C2F), CaO.Fe2O3 (CF) and 3CaO.Al2O3 (C3A) phase's formation, which improved the sintering... 

In this research study, a comparative evaluation of the additional impact of nanometer-sized tetravalent oxides [Zirconia (ZrO2), Titania (TiO2), and Silica (SiO2)] on the properties and performance of Doloma-Magnesia (MgO-CaO) ceramic refractories, with an emphasis on their hydration resistance improvement, has been done. For this purpose, from 0 to 2.5 wt% ZrO2, TiO2, and SiO2 nanometer-sized particles have been added to the Doloma-Magnesia compositions. After formulation and mixing of the starting materials, the pressed samples (at 150 MPa) were tempered (at 250 °C for 12 h) and fired in a shuttle furnace (at 1650 °C for 3 h). The physical, mechanical, and thermo-mechanical properties of... 

In this work the effect of nano- and microZrO2 addition on the densification and hydration resistance of MgO–CaO refractories was investigated. 0, 2, 4, 6 and 8 wt% ZrO2 was added to MgO–CaO refractories that contain 35 wt% CaO. The crystalline phases and microstructure characteristics of specimens sintered at 1650 °C for 5 h in an electric furnace were studied by X-ray diffraction (XRD) and scanning electron microscopy (SEM), respectively. The physical properties are reported in terms of bulk density, apparent porosity and hydration resistance. Results show that with addition of ZrO2 the bulk density and hydration resistance of the samples increased while apparent porosity decreased. Also... 

The high hydration potential of CaO and MgO phases restricted the application of Mag-Dol refractory composites. In this study, the impact of nano-silica (SiO2) addition on the physical, mechanical, thermo-mechanical as well as microstructure of Mag-Dol refractory composites is investigated. Mag-Dol compositions were prepared by using calcined dolomite and magnesite particles (micron, 0–1, 1–3, 3–5, and 5–8 mm), liquid resin, and 0, 0.5, 1, 1.5, 2, and 2.5 wt% nano SiO2 as additives. Specimens were heated up to 1650 °C for the 3 h soaking period. Fired specimens were characterized by physical (apparent porosity, bulk density, and hydration resistance), mechanical (cold crushing strength), and... 

Many benefits of the MgO-C refractory bricks such as excellent corrosion resistance, high thermal shock resistance, good mechanical strength at high temperatures, and permeability have attracted attention of consumers in various industries. But on the other hand, the low oxidation resistance of these refractory bricks at high temperatures has restricted their application. For this purpose, in this research study, the impact of Nano-ZrSiO4 addition on microstructure and performance of MgO-C refractory was investigated. 0, 0.5, 1, 1.5, and 2 wt % of Nano-ZrSiO4 was added to compositions. After samples preparation, all specimens tempered and fired (in a coke bed) at the 250 °C and 1600 °C for 8... 

Magnesia-dolomite refractories have advantages such as stability in the basic environments, clean steel production, high corrosion resistance, proper covering in the cement furnace, and low production costs. However, their application is restricted due to low hydration resistance. In this research, the effects of nano and micro alumina particles on the microstructure, sintering behavior, and properties of magnesia-dolomite refractories were studied. For this purpose, MgO-CaO refractories were formulated using dolomite and magnetite and 0, 2, 4, 6 and 8 wt percentage nano and micro alumina were added to the formulation. Phase and microstructure analysis of the samples were performed using... 

Single-crystal hydroxyapatite (HAp) nanorods and nanogranules have been synthesized successfully by a mechanochemical process using two distinct experimental procedures. The experimental outcomes are characterized by transmission electron microscopy (TEM), and powder X-ray diffraction (XRD) techniques. In this work, the feasibility of using polymeric milling media to prepare hydroxyapatite nanoparticles is described. The resulting hydroxyapatite powder exhibits an average size of about 20 to 23 nm. Final results indicate that the proposed synthesis strategy provides a facile pathway to obtain single-crystal HAp with high quality and suitable morphology. © 2008 Elsevier B.V. All rights... 

Male infertility is mostly related to semen and spermatozoa, and any diagnosis or treatment requires the investigation of the motility patterns of spermatozoa. The movements of spermatozoa are fast and involve collision and occlusion with each other. In order to extract the motility patterns of spermatozoa, multi-target tracking (MTT) of spermatozoa is necessary. One of the most important steps of MTT is data association, in which the newly arrived observations are used to update the previous tracks. Dynamic Bayesian network (DBN) is a powerful tool for modeling and solving various types of problems such as tracking and classification. There can also be a hybrid-DBN (HDBN), in which both... 

A series of polyurethane elastomers (PUEs) based on 4,4′-cyclohexamethylene diisocyanate (H12MDI)/1,2-ethanediol as hard segment with the soft segments having different molecular weights of polycaprolactone diols, were effectively polymerized by two step technique. The structural characterization was performed by FT-IR spectroscopy. The X-ray diffraction (XRD) technique was used to study the crystallinity and hydrophilicity of the prepared polymer films. It was found that crystallinity and hydrophilicity increased with increasing the chain length of soft segments. The effect of molecular weight of polyols on the contact angle, water absorption (%) and swelling behavior of the synthesized... 

We consider the problem of interference management in wireless cellular networks with caches at both base stations and receivers, and we characterize the degrees of freedom (DoFs) per cell to within an additive gap of (1/3) and a multiplicative gap of 2 for all system parameters, under one-shot linear schemes. Our result indicates that the one-shot linear DoF per cell scales linearly with the total amount of cache available in the cell, i.e., the sum of the caches at the central base station and all the receivers within the cell, resembling a similar phenomenon previously observed for the case of fully connected wireless networks. To establish the result, we propose a decentralized and... 

This paper presents a dry mechanochemical process to produce hydroxyapatite (HAp) nanoparticles. Two distinct chemical reactions are introduced to prepare HAp powders using milling process. Structural and morphological properties of the obtained materials are studied by X-ray diffraction and transmission electron microscopy. The results reveal that the single crystal HAp nanoparticles have been successfully produced in metallic and polymeric vials through two different experimental procedures. Tempered chrome steel and polyamide-6 materials are adopted as the metallic and polymeric vials respectively. Nanoellipse, nanorod and nanosphere powders are obtained in these experimental procedures.... 

Purpose - A numerical method is developed to capture the interaction of solid object with two-phase flow with high density ratios. The current computational tool would be the first step of accurate modeling of wave energy converters in which the immense energy of the ocean can be extracted at low cost. Design/methodology/approach - The full two-dimensional Navier-Stokes equations are discretized on a regular structured grid, and the two-step projection method along with multi-processing (OpenMP) is used to efficiently solve the flow equations. The level set and the immersed boundary methods are used to capture the free surface of a fluid and a solid object, respectively. The full... 

A new perspective suitable for understanding the details of nonlinear pumping (formation of traveling shocks) inside a pressurized cavity is constructed in this paper. Full compressible axisymmetric three-dimensional Navier-Stokes equations are used as the starting point to cover all complexities of the problem that exceedingly increase for particular ranges of Mach, Reynolds and Prandtl numbers. Then a very high-order numerical method is introduced to preserve the user-defined order of accuracy for practical simulations. For removal of spurious waves, higher-order compact filters are derived. All equations are marched in time using the classical Runge-Kutta algorithm which is appropriate... 

Large-stencil schemes which their spectral properties are acceptable in the vicinity of ω = π are analyzed for the first time. A machine independent model for evaluating the efficiency of generalized time-marching finite-difference algorithms over periodic domains is developed. This model which is based on operation count reveals that for small values of Total Computational Cost(TCC), the previous low-order small-stencil schemes are more efficient while for moderate TCC, the efficiency of optimized large-stencil schemes abruptly increases. This important result is the motivation for developing optimized large-stencil schemes. The current schemes are successfully implemented in a full... 

Recently, several high-order accurate methods have been developed for solving nonlinear equations governing in the high-frequency oscillations of a fluid column. If we assume that the value of Reynolds and Prandtl numbers are high enough then it is possible to neglect the effect of Stokes Layer and it has been previously shown that the calculated pressure profile obtained by solving three-dimensional axisymmetric compressible NS (Navier-Stokes) equations is in good agreement with one-dimensional adiabatic model of Ilinskii. For this particular flow which is the typical of engineering flows inside acoustical compressors, it is clear that high-resolution simulation of NS equations in higher... 

A new perspective suitable for understanding the details of nonlinear pumping (formation of traveling shocks) inside a pressurized cavity is constructed in this paper. Full compressible axisymmetric three-dimensional Navier-Stokes equations are used as the starting point to cover all complexities of the problem that exceedingly increase for particular ranges of Mach, Reynolds and Prandtl numbers. Then a very high-order numerical method is introduced to preserve the user-defined order of accuracy for practical simulations. For removal of spurious waves, higher-order compact filters are derived. All equations are marched in time using the classical Runge-Kutta algorithm which is appropriate... 

How can we optimally trade extra computing power to reduce the communication load in distributed computing? We answer this question by characterizing a fundamental tradeoff between computation and communication in distributed computing, i.e., the two are inversely proportional to each other. More specifically, a general distributed computing framework, motivated by commonly used structures like MapReduce, is considered, where the overall computation is decomposed into computing a set of “Map” and “Reduce” functions distributedly across multiple computing nodes. A coded scheme, named “coded distributed computing” (CDC), is proposed to demonstrate that increasing the computation load of the...