Loading...
Search for:
ghasemi-taree--maryam
0.14 seconds
Total 422 records
Study of Light Depolarization in Biological Tissue by Means of the Monte Carlo Simulation
, M.Sc. Thesis Sharif University of Technology ; Amjadi, Ahmad (Supervisor) ; Ansari, Mohammad Ali (Supervisor)
Abstract
In this project, polarization properties, intensity of reflected light, by one layer tissue that has specified optical properties has been investigated by means of Monte Carlo simulation. Fresnel's coefficients were considered in this simulation too. The incident beam was assumed very thin with specified wave length and linear polarization parallel to plane of incidence.This beam was radiated from origin to the tissue vertically. The layer consists of homogenous particles with defined radius. Concentration of particles was constant. 10000 photons with specified weight were launched to tissue in each simulation. The results of reflected light from tissue showed that variation of the size and...
Transition from the Down State to the Up State of RBD Protein in SARS -CoV- 2
, M.Sc. Thesis Sharif University of Technology ; Ejtehadi, Mohammad Reza (Supervisor) ; Ghasemi Tarei, Maryam (Co-Supervisor)
Abstract
Since the first observed case in December 2019, millions of people have been infected by Coronavirus disease 2019 (COVID-¬19), which is caused by severe acute respiratory syndrome coronavirus 2 (SARS¬-CoV-¬2). Located on the viral membrane, trimeric spike glycoprotein is one of the most crucial parts of the virus’ structure as it is responsible for the attachment and entry of the virus to host cells. The spike glycoprotein undergoes hinge-like conformational movements and its receptor¬binding domains (RBD) can be in either an accessible (up) state or an inaccessible (down) state to the host cell receptors, such as ACE2. Having performed Molecular Dynamics Simulations and Targeted Molecular...
3d Design of a Microfluidic Chip for Anticancer Drugs Screening
, M.Sc. Thesis Sharif University of Technology ; Mashayekhan, Shohreh (Supervisor) ; Saadatmand, Maryam (Supervisor)
Abstract
Nowadays, advanced and inexpensive pre-clinical methods for investigating the effects of anti-cancer drugs are expanding. One of the latest three-dimensional laboratory modeling for evaluating the effects of drugs is the use of tumor-on-chip technology, which actually models the physiological system of the body through three-dimensional scaffolds, multicellular cultures, and shaped vascular systems. In this study, three-dimensional culture of cancer cells was performed in the form of spheroids. A chip of U-shaped microstructures with and without gaps was used to trap cells and form cancer spheroids. We simulated the simultaneous effect of drug and oxygen concentration distribution inside the...
Nanoparticle-based optical sensor arrays
, Article Nanoscale ; v. 9 , 2017 , pages 16546 – 16563 ; 2040-3364 ; Bigdeli, Arafeh ; Ghasemi, Forough ; Golmohammadi, Hamed ; Abbasi-Moayed, Samira ; Farahmand Nejad, M. Amin ; Fahimi-Kashani, Nafiseh ; Jafarinejad, Somayeh ; Shahrajabian, Maryam ; Sharif University of Technology
Royal Society of Chemistry
2017
Abstract
As in many other methods that have integrated nanoparticles (NPs), the chemical nose/tongue strategy has also progressed greatly since the entrance of NPs into this field. The fascinating tunable physicochemical properties of NPs have made them powerful candidates for array-based sensing platforms and have enabled the development of real-time, sensitive and portable systems that are able to target complex mixtures of analytes. In particular, the unique optical properties of NPs have a key role in providing promising array-based sensing approaches. This review will describe the main aspects and processes of most common NP-based optical sensor arrays. The fundamental steps in the design of a...
Model Checking of Stochastic Activity Networks
, M.Sc. Thesis Sharif University of Technology ; Movaghar, Ali (Supervisor)
Abstract
Modeling and performance evaluation of the real time distributed systems is a significant problem. Stochastic activity network is one of the high level models used for this purpose. This network is an extension of generalized stochastic Petri net which is more powerful and flexible than other Petri net extensions. Checking the satisfiability of properties such as performance, dependability and user's expected properties is considerable in these models. Thus, using the approaches and generating modeling and model checking tools with the mentioned purpose is attractive. A model checker automatically checks the correctness of the system behaviors as properties against the model by getting the...
Robust Estimation and Control of a Planet Lander
, M.Sc. Thesis Sharif University of Technology ; Kiani, Maryam (Supervisor)
Abstract
This study has focused on the important problem of landing on a planet as an important current and future space mission. In this regard, dynamics modeling and integrated state estimation and control problems have been investigated in different views. To this aim, first a novel concurrent representation for translational and rotational kinematics has been developed based on the extension of modified Rodrigues parameters to dual space. This parameter set, called dual modified Rodrigues parameters (DMRP), is then utilized to establish an integrated roto-translational dynamic. The proposed DMRP-based kinematics and dynamics have been verified via comparison to traditional methods of...
Optimal Energy Trading in a Smart Grid Based on Extremum-seeking Algorithm
, M.Sc. Thesis Sharif University of Technology ; Babazadeh, Maryam (Supervisor)
Abstract
Prevalent deployment of Distributed Energy Resources(DERs) in the demand side of electrical energy grids has several advantages such as greenhouse gases emission reduction, mitigation of power losses in the distribution grids and abatement of the dependency on the wholesale generation companies. At the same time, it paves the way for the advent of local interactive energy trading frameworks. In the following thesis, a distributed data-driven algorithm is developed for market-clearing in a community-based local energy market. The social welfare maximization is considered as the objective of the energy trading. The production and demand of electricity are the decision variables of sellers and...
Design of Microfluidic Chip for 3D Cell Culture
, M.Sc. Thesis Sharif University of Technology ; Saadatmand, Maryam (Supervisor)
Abstract
Understanding biological systems requires extensive knowledge of individual parameters, and to study the processes of cell differentiation and cell behavior, a suitable environment must be created with the physiological conditions of the human body. For this purpose, with the knowledge of microfluidics, a microenvironment can be provided to study the behavior of cells on a small scale. The use of bone tissue model microfluidic chips is an alternative and new method in which it is possible to study the behavior of cells to differentiate into bone and to examine the toxicity of drugs, which in itself can help in the effective and successful treatment of these cases show. Therefore, in this...
Navigation and Control of a Free-Flying Satellite for Cargo Transportation and Placement in Intra-Vehicular Environment
, M.Sc. Thesis Sharif University of Technology ; Kiani, Maryam (Supervisor)
Abstract
The main topic of this research is the navigation and control of a free-flying satellite with a robot manipulator while transferring and placing cargo on a space station. After connecting the cargo module, astronauts and robots need to deliver the available loads to the desired modules in a space station. Capturing an object or cargo is a critical issue studied extensively so far. However, delivery and placing of the cargo at the target point have not been investigated yet, to the best of the author’s knowledge; hence, this is a primary motivation for conducting the proposed research. After capturing the payload, the position and attitude of the manipulator with respect to the station’s...
Fabrication the Hydrogel Microfibers Using Bioprinter with Application in Cardiovascular Model
, M.Sc. Thesis Sharif University of Technology ; Saadatmand, Maryam (Supervisor)
Abstract
Cardiovascular disease (CVD) currently remains a considerable challenge for clinical treatments. CVDs account for N17.5 million deaths per year and will predictably increase to 23.6 million by 2030. The main purpose is to create human model systems to study the effect of disease mutations or drug treatment on the heart. In addition, engineered cardiac tissues are considered promising candidates to be transplanted to improve the function of diseased hearts. For engineered active tissues/organs, 3D bioprinting can fabricate complex tissue architecture with a spatiotemporal distribution of bioactive substances (cells, growth factors, and others) to better guide tissue regeneration. However,...
Utilizing Gaussian Processes to Learn Dynamics of Unknown Torques Acting on a Spacecraft
, M.Sc. Thesis Sharif University of Technology ; Kiani, Maryam (Supervisor)
Abstract
Accurate and fast attitude estimation of a rigid body plays an essential role in the performance of a vehicle’s control system, especially aerospace vehicles. Ample works have been done to increase the accuracy and speed of the attitude estimation process, but all have been developed according to a model-based approach. This approach assumes that the torques acting on the body have a known dynamical model that is used for the attitude estimation. The purpose of the present research is to estimate the attitude via a model-free approach, i. e. dynamics of the torques acting on the body are no longer assumed to be known, and its learning is the next step. Thus, the problem formulation of this...
Stabilization and Pole-Placement by Structurally-Constrained Controllers: A Graph-Theoretic Approach
, M.Sc. Thesis Sharif University of Technology ; Babazadeh, Maryam (Supervisor)
Abstract
This thesis presents a new approach to design structural output feedback controllers with stabilization and pole-placement at desired points on the S plane. It is assumed that the linear time-invariant system has no fixed mode corresponding to the specified control structure, outside the desired region of the closed-loop poles, such that the structural controller design problem is theoretically feasible. To this end, the structural output controller design problem is first transformed into a structurally equivalent problem based on the solution of a set of discrete linear programs. Then, by using the resultant structure, a new method is proposed for designing static and dynamic control loops...
Fabrication of Thick Scaffold with Microfluidic Channels by Bioprinter
, M.Sc. Thesis Sharif University of Technology ; Saadatmand, Maryam (Supervisor)
Abstract
Cardiovascular diseases are among the leading causes of death worldwide. For instance, in 2015, almost 31% of the world’s mortality rate was due to these causes. One of these diseases is cardiac coronary vessels’ occlusion which leads to the insufficient blood supply to the heart tissue and cardiomyocytes death after Myocardial Infarction (MI). After MI, a hierarchy of events in the heart tissue changes heart muscle and forms cardiac fibrosis. This fibrotic tissue does not have the native one’s properties and function, so it will cause cardiac arrest and patient death. Therefore, it is obvious that vascular network plays a crucial role in the heart function. The importance of cardiac...
Optimal Control of Unknown Interconnected Systems via Distributed Learning
, M.Sc. Thesis Sharif University of Technology ; Babazadeh, Maryam (Supervisor)
Abstract
This thesis addresses the problem of optimal distributed control of unknown interconnected systems. In order to deal with this problem, a data-driven learning framework for finding the optimal centralized and the suboptimal distributed controllers has been developed via convex optimization.First of all, the linear quadratic regulation (LQR) problem is formulated into a nonconvex optimization problem. Using Lagrangian duality theories, a semidefinite program is then developed that requires information about the system dynamics. It is shown that the optimal solution to this problem is independent of the initial conditions and represents the Q-function, an important concept in reinforcement...
Application of Machine Learning Algorithms in Analysis and Prediction of Football Goalkeepers Performance and their Valuation in the Transfer Market
, M.Sc. Thesis Sharif University of Technology ; Radman, Maryam (Supervisor)
Abstract
Football transformation into an industry with extraordinary financial flow has made this popular sport an attractive field for sports analysts. The development of the computer science and data science has led to the emergence of a concept called football match analysis. The goalkeepers, as a unique member of football teams and regrading their unique features and characteristics, play a crucial role in the outcome of competitions and the success of the teams. Therefore, analysis of various aspects of their performance is one of the essential issues in the application of data science in football. In this research, three separate parts have been studied. In the first part, by using pre-match...
Fixed-Time Consensus Control of Unknown Multi-Agent Systems Based on Distributed Reinforcement Learning
, M.Sc. Thesis Sharif University of Technology ; Babazadeh, Maryam (Supervisor)
Abstract
This thesis introduces a distributed backstepping control strategy based on reinforcement learning to achieve fixed-time consensus in high-order nonlinear multi-agent systems. Each agent, whether a leader or a follower, is modeled using a strict feedback approach, incorporating uncertainties as unknown nonlinear functions and disturbance signals across all state variables. The communication network among agents can be either directed or undirected, with a fixed topology. Each follower employs a control law derived from actor-critic networks, utilizing only the outputs from neighboring agents. The proposed method combines virtual and actual backstepping control laws, formulated from two key...
Employing humanoid robots for teaching english language in Iranian junior high-schools [electronic resource]
, Article International Journal of Humanoid Robotics ; Vol. 11, No. 3 (2014) 1450022 ; Meghdari, Ali ; Ghazisaedy, Maryam ; Sharif University of Technology
Abstract
This paper presents the effect of robotics assisted language learning (RALL) on the vocabulary learning and retention of Iranian English as foreign language (EFL) junior high school students in Tehran, Iran. After taking a vocabulary pre-test, 46 beginner level female students at the age of 12, studying in their first year of junior-high participated in two groups of RALL (30 students) and non-RALL (16 students) in this study. The textbook used was the English book (Prospect-1) devised by the Iranian Ministry of Education for 7th graders, and the vocabulary taught and tested (pre-test and post-test) were taken from this book. Moreover, the treatment given by a teacher accompanied by a...
Parallelized numerical modeling of the interaction of a solid object with immiscible incompressible two-phase fluid flow
, Article Engineering Computations (Swansea, Wales) ; Volume 34, Issue 3 , 2017 , Pages 709-724 ; 02644401 (ISSN) ; Nikbakhti, R ; Ghasemi, A ; Hedayati, F ; Malvandi, A ; Sharif University of Technology
2017
Abstract
Purpose - A numerical method is developed to capture the interaction of solid object with two-phase flow with high density ratios. The current computational tool would be the first step of accurate modeling of wave energy converters in which the immense energy of the ocean can be extracted at low cost. Design/methodology/approach - The full two-dimensional Navier-Stokes equations are discretized on a regular structured grid, and the two-step projection method along with multi-processing (OpenMP) is used to efficiently solve the flow equations. The level set and the immersed boundary methods are used to capture the free surface of a fluid and a solid object, respectively. The full...
Oscillating pipe flow: High-resolution simulation of nonlinear mechanisms
, Article 2006 ASME Joint U.S.- European Fluids Engineering Division Summer Meeting, FEDSM2006, Miami, FL, 17 July 2006 through 20 July 2006 ; Volume 1 SYMPOSIA , 2006 , Pages 1-10 ; 0791847500 (ISBN); 9780791847503 (ISBN) ; Sharif University of Technology
American Society of Mechanical Engineers
2006
Abstract
A new perspective suitable for understanding the details of nonlinear pumping (formation of traveling shocks) inside a pressurized cavity is constructed in this paper. Full compressible axisymmetric three-dimensional Navier-Stokes equations are used as the starting point to cover all complexities of the problem that exceedingly increase for particular ranges of Mach, Reynolds and Prandtl numbers. Then a very high-order numerical method is introduced to preserve the user-defined order of accuracy for practical simulations. For removal of spurious waves, higher-order compact filters are derived. All equations are marched in time using the classical Runge-Kutta algorithm which is appropriate...
An optimized large-stencil approach for capturing near-PI frequencies
, Article 12th AIAA/CEAS Aeroacoustics Conference, Cambridge, MA, 8 May 2006 through 10 May 2006 ; Volume 5 , 2006 , Pages 3010-3022 ; 1563478099 (ISBN); 9781563478093 (ISBN) ; Sharif University of Technology
American Institute of Aeronautics and Astronautics Inc
2006
Abstract
Large-stencil schemes which their spectral properties are acceptable in the vicinity of ω = π are analyzed for the first time. A machine independent model for evaluating the efficiency of generalized time-marching finite-difference algorithms over periodic domains is developed. This model which is based on operation count reveals that for small values of Total Computational Cost(TCC), the previous low-order small-stencil schemes are more efficient while for moderate TCC, the efficiency of optimized large-stencil schemes abruptly increases. This important result is the motivation for developing optimized large-stencil schemes. The current schemes are successfully implemented in a full...