Sharif Digital Repository

One of the major challenges in Additive Manufacturing is the creation of residual stresses due to the high temperature gradient in the solidification zone. This will cause problems such as cracks in the structure, metallurgical defects as well as deformation and dimensional accuracy reduction in the finished product. The purpose of this study is to perform mathematical modeling and computer simulation of the selective laser melting process (SLM) to predict these stresses as well as identify the effective parameters on this phenomenon. The conditions were adjusted in this model with the actual coefficients of the device. Additionally, the powder used in this project is Ti6Al4V material. By... 

Multimorbidity in an individual is a typical and increasing condition and a major challenge in healthcare. The goal of treatment recommendation for such patients is to decide the most effective combination of treatments. Doctors typically prescribe medication based on their intuition and experience. However, due to knowledge gaps or unintended biases, often times these clinical decisions can be sub-optimal. Broad adoption and usage of electronic health records (EHRs) in the last decade has opened up a great opportunity to leverage healthcare data to improve clinical decisions.In this approach we use EHR and drug-drug interaction (DDI) information to prescribe medications. We use multiple... 

In this study, the interaction of tunneling of line 2 of Mashhad metro and existing metro station (Shariati station) in line 1 has been investigated. To produce the stress and displacement which is caused by excavation of station, the process of station excavation has been modeled by method of cut and cover.This method is the common method for station construction at Shallow depth and is used in several cases in line 1 of Mashhad metro. The piled-raft system is used in foundation of central part of the station to reduce the settlements and the effects of interactions between the station and new tunnel. The new tunnel under the station is surrounded by two rows of lateral piles with distance... 

Ontology alignment is a process for selection of a good mapping between entities of two (or more) ontologies. It can be viewed as a two phase process of: 1) Find the similarity of each pair of entities from two ontologies, and 2) Extraction of an optimal or near optimal mapping. Many researches had been down in the first phase, but researches in the second phase are little. Mapping extraction approaches applied in ontology alignment use similarity matrix to extract mapping, and ontologies have not any role in mapping extraction phase. One of the most important components in ontology is its structure which can help us in alignment extraction.
In this thesis, an approach was proposed that... 

Lead-containing solder alloys in particular Sn-37Pb is the most common alloy used in electronics industry, this alloy has the good mechanical properties and excellent wetting properties and low prices. Recently, increasing environmental and health concerns over the toxicity of lead combined with strict legislation to ban the use of lead-based solders have provided an inevitable driving force for the development of lead-free solder alloys. A group of these lead-free solders are nanocomposite solders that because of having the reinforcement nano particles exhibit lots of unique properties, such as good mechanical and thermal properties. The aim of this research produce a new tin base... 

More than 70 weight percentage of using parts in diverse industries (such as military, civil, automobile productions and etc.) are produceed by the casting processes. For each one of the casting procceses, mold cavity is requisite for arrived molten metal in the mold cavity to get eventuated as a solidified part. Based on mold ilk, if the mold is permanent, the cast part must be capable to be remoeved from the the mold inside. For the non-permanent mold (asssuming multi-piece and non-monolithic), if the model requires to be removed from the mold inside after molding and before casting, only model (no cast part) has to be moldable (why for removing the solidified cast part from the... 

Physical and mechanical properties of cast alloys is partly a function of the morphology and volume fraction of phases from freezing. The microstructure of the eutectic solidification is function of physical properties (especially mobility and surface tension) and the volume fraction of phases involved in the evolution. The prediction of solidification microstructures will be very helpful for improving the mechanical properties of casting alloys and designing of new families of alloys. The theoretical study of the formation of eutectic microstructures is very difficult and almost impossible in general cases and empirical studies are expensive. The purpose of this study is to predict the... 

In this thesis, by deliberately embedding “emplacements” in the system to locally break the inversion and the time reversal symmetries, the manifold of all possible microstructures is navigated in pursuit of the one that can give rise to maximal magnetoelectric effect mediated by elastic energy of piezoelectric-piezomagnetic phases via their interface --- needless to mention the low intensity of such an effect in single-phase multiferroics. The configuration with the maximal coupling is sought within the context of phase-field modeling. In order to numerically track the conserved dissipative dynamics of the interface (namely, the Cahn-Hilliard equation) --- that is nonlocal by the nature of... 

We discuss, in the setting of UMD Banach spaces E, existence, uniqueness and the continuous dependence on the data A, F, G and of mild solutions of semilinear stochastic evolution equations with multiplicative noise of the form dX(t) = [AX(t) + F(t;X(t))]dt + G(t;X(t))dWH(t); t 2 [0; T]; X(0) = ; Where A generates an analytic C0-semigroup on a UMD Banach space E and WH is a cylindrical Brownian motion with values in a Hilbert space H. We can see that if the mappings F : [0; T] E ! E and G : [0; T] E ! L(H;E) satisfy suitable Lipschitz conditions and is F0-measurable and bounded, then this problem has a unique mild solution.And We arw going to review continuous dependence of the solutions... 

According to official statistics, family businesses form the majority of businesses around the world. When we talk about businesses, we are more likely to say that those firms face issues related to family businesses.One of the trending topics that has recently been considered by researchers and a lot of research has been done in this regard, is specific issues related to marketing and branding of family businesses.In this study, we tried to examine the family business brand in terms of reputation. Reputation is the perception in the minds of brand stakeholders about the brand and the organization. So we tried to take as fair and accurate a sample as possible, to seek the opinions of... 

Customer loyalty plays one of the most vital roles in business profitability. This concept gives special prominence to attaining new customers, which is by far less costly than attracting new ones. Therefore, investigating the impact of factors affecting customer retention is of precise significance. In the respect, corporate social responsibility, as an imperative factor impacting customer loyalty, gained more attention by various companies in the last decades.Over the past few months, the world has encountered the hazard of the Coronavirus pandemic. Most aspects of daily life in different parts of the globe have been affected by this disease. Companies are no exception. The coronavirus has... 

bulk metallic glass Unlike metal materials that have a crystalline structure, amorphous glass is an amorphous material with an irregular atomic structure that simultaneously has the same physical properties as metals. Due to the absence of crystal defects such as dislocation and grain boundaries, these materials show unique mechanical properties such as high strength and elastic strain, abrasion resistance and proper corrosion. However, their plastic deformation is heterogeneous, concentrated, and accompanied by sudden failure. Unlike metals, these materials do not have a long-range crystalline order, and their atomic structure includes short-range and mid-range order. The short-range order... 

Continuous casting is one of the ingot production methods in which the product has uniform chemical structure, low defects and high production rates. These days, carbon steel and nonferrous alloys are mainly produced by this special method. The design of continuous casting process includes a lot of difficulties due to its technological complexity. One of the most important aspects of this process is the heat transfer during solidification. In the present study, a new mathematical model and its corresponding numerical solution method have been introduced to establish the condition of directional solidification along the major ingot’s axis. The controlling parameters used in the model are... 

The current study is dedicated to free vibration and buckling analysis of thick FGM conical shells conveying hot flows with the consideration of initial geometric imperfections. To this end, the higher order governing equations of motion and the corresponding boundary conditions are derived using Hamiltonian formulations. Due to the solution procedure of Frobenius series expansion, the differential form of equations is obtained by applying by part integration to the integral form of equations of motion. Radial and longitudinal temperature distributions are considered while pressure distribution and geometric imperfection variations are found to be in longitudinal direction, only. The final...