Loading...
Search for:
ghasempour-negati--mobin
0.127 seconds
Csr Effect on Customer Loyalty during a Pandemic: a Case Study of Mobile-Phone Operator Companies in Iran
, M.Sc. Thesis Sharif University of Technology ; Kiamehr, Mehdi (Supervisor)
Abstract
Customer loyalty plays one of the most vital roles in business profitability. This concept gives special prominence to attaining new customers, which is by far less costly than attracting new ones. Therefore, investigating the impact of factors affecting customer retention is of precise significance. In the respect, corporate social responsibility, as an imperative factor impacting customer loyalty, gained more attention by various companies in the last decades.Over the past few months, the world has encountered the hazard of the Coronavirus pandemic. Most aspects of daily life in different parts of the globe have been affected by this disease. Companies are no exception. The coronavirus has...
Cyclic Behavior of Interior Reinforced Concrete Beam-column Connection with Self-consolidating
, Ph.D. Dissertation Sharif University of Technology ; Kazemi, Mohammad Taghi (Supervisor)
Abstract
A significant amount of research in self-consolidating concrete technology is being placed in evaluating the suitability of the material for use in structural applications. However, research is needed to confirm the ability of self-consolidating concrete structural elements to adequately resist vertical and lateral loads. In a reinforced concrete building subjected to earthquake type loading, the beam to column connections constitute one of the critical regions and they must be designed and detailed to dissipate large amounts of energy without a significant loss of stiffness or strength. In the experimental part of this study, four full size interior beam-column subassemblages with 3.0 m...
Experimental Investigation of Asphaltene Precipitation and Deposition in Enhanced Oil Recovery by Low Salinity Waterflooding
, M.Sc. Thesis Sharif University of Technology ; Ayatollahi, Shahabadin (Supervisor) ; Fatemi, Mobin (Supervisor)
Abstract
Asphaltenes are a polydisperse mixture of the heaviest and most polarizable fractions of the crude oil. They are defined according to their solubility properties as being soluble in aromatic solvents but insoluble in light paraffin solvents. Asphaltenes are usually responsible for many problems like wettability changes of the reservoir rock, pore clogging in the reservoir porous matrix and fouling in wellbore tubing and production surface facilities. Most of the studies in the literature, addressing the asphaltene precipitation and deposition (APD), are investigating natural depletion or gas injection process such as CO2 flooding. These studies show that asphaltene deposition and...
Hybrid multiwalled carbon nanotubes and trioxide tungsten nanoparticles for hydrogen gas sensing
, Article Journal of Physics D: Applied Physics ; Volume 42, Issue 16 , 2009 ; 00223727 (ISSN) ; Iraji zad, A ; Sharif University of Technology
2009
Abstract
The WO3/multiwalled carbon nanotubes (MWNTs) hybrid films were fabricated by spin-coating on an alumina substrate. The structure, morphology, chemical composition and quality of the as-prepared WO3 nanoparticles, functionalized MWNTs and WO3/MWNTs hybrid films were studied by SEM, TEM, XRD, XPS, DLS and Raman spectroscopy methods. Results show that WO3 nanoparticles were nucleated on oxygenated functionalized MWNTs in hybrid suspension. After coating and annealing the films at 350 °C, the hybrid WO3/MWNTs films present rather linear gas sensitivity as a function of hydrogen concentrations at 300 °C. Results are discussed based on surface increase as well as development of two types of...
Agile web development methodologies: a survey and evaluation
, Article Studies in Computational Intelligence ; Volume 722 , 2018 , Pages 1-25 ; 1860949X (ISSN) ; Ramsin, R ; Sharif University of Technology
Springer Verlag
2018
Abstract
Dynamic and accessible web systems have gained utmost importance in modern life. Due to the competitive nature of such systems, they need to be superior as to performance, scalability, and security. Web systems typically require short time-to-markets, and it should be possible to easily implement new requirements into working web systems. These ideals have made agile methods especially suitable for developing such systems, as they promote productivity, facilitate continuous interaction with customers, and enhance the flexibility and quality of the software produced. When starting a web development project, selecting the methodology that fits the project situation can be an important factor...
Safe Personalized Treatment Recommendation System for Multimorbidity
, M.Sc. Thesis Sharif University of Technology ; Habibi, Jafar (Supervisor)
Abstract
Multimorbidity in an individual is a typical and increasing condition and a major challenge in healthcare. The goal of treatment recommendation for such patients is to decide the most effective combination of treatments. Doctors typically prescribe medication based on their intuition and experience. However, due to knowledge gaps or unintended biases, often times these clinical decisions can be sub-optimal. Broad adoption and usage of electronic health records (EHRs) in the last decade has opened up a great opportunity to leverage healthcare data to improve clinical decisions.In this approach we use EHR and drug-drug interaction (DDI) information to prescribe medications. We use multiple...
Evaluation the Surface Settlement and Interaction Between Tunnelinline2 and Metro Station Inline1 of Mashhad Metro at Intersection Using 3-D Numerical Modeling
, M.Sc. Thesis Sharif University of Technology ; Sadaghiani, Mohammad Hossein (Supervisor)
Abstract
In this study, the interaction of tunneling of line 2 of Mashhad metro and existing metro station (Shariati station) in line 1 has been investigated. To produce the stress and displacement which is caused by excavation of station, the process of station excavation has been modeled by method of cut and cover.This method is the common method for station construction at Shallow depth and is used in several cases in line 1 of Mashhad metro. The piled-raft system is used in foundation of central part of the station to reduce the settlements and the effects of interactions between the station and new tunnel. The new tunnel under the station is surrounded by two rows of lateral piles with distance...
Approximation Approaches for Ontology Alignment
, M.Sc. Thesis Sharif University of Technology ; Abolhassani, Hassan (Supervisor)
Abstract
Ontology alignment is a process for selection of a good mapping between entities of two (or more) ontologies. It can be viewed as a two phase process of: 1) Find the similarity of each pair of entities from two ontologies, and 2) Extraction of an optimal or near optimal mapping. Many researches had been down in the first phase, but researches in the second phase are little. Mapping extraction approaches applied in ontology alignment use similarity matrix to extract mapping, and ontologies have not any role in mapping extraction phase. One of the most important components in ontology is its structure which can help us in alignment extraction.
In this thesis, an approach was proposed that...
In this thesis, an approach was proposed that...
Cyclic behaviour of interior reinforced concrete beam-column connection with self-consolidating concrete
, Article Structural Concrete ; Volume 17, Issue 4 , 2016 , Pages 618-629 ; 14644177 (ISSN) ; Kazemi, M. T ; Attari, N. K. A ; Sharif University of Technology
Wiley-Blackwell
2016
Abstract
A significant amount of research on self-consolidating concrete (SCC) technology has been devoted to evaluating the suitability of the material for its use in structural applications. However, more research is required to confirm the adequacy of SCC structural members for resisting gravity and seismic loads. This study focuses on the experimental investigation of the seismic performance of interior reinforced concrete beam-column connections with SCC. Four beam-column connection specimens, three with SCC and one with normally vibrated concrete (NC), were designed for this experimental study. Factors such as concrete type (SCC or NC) and axial load ratio (0, 7.5 and 15 % of column section...
2D Compositional Simulation of Reservoirs using Finite Volume Method
, M.Sc. Thesis Sharif University of Technology ; Pishvaie, Mahmoud Reza (Supervisor) ; Fatemi, Mobin (Supervisor)
Abstract
One of the main purposes of this project is to propose an efficient and stable algorithm of a semi-discretized formulation for compositional simulation of oil reservoirs. In this algorithm, all the equations including both mass balances and equilibrium equations are solved simultaneously. The gradient terms are discretized by the Finite Volume Method (FVM). The resulting Differential Algebraic Equation, the so-called DAE, are solved by MATLAB functions. Another novel technique developed, handles each block equations set, separately. In this block-by-block scheme, there are two set of equations; the primary (mass balance) and secondary (equilibrium) equations. In the primary ones, the...
Experimental Investigation of Fractures’ Water Shut-off in Low Salinity Water Injection Using Preformed Particle Gels
, M.Sc. Thesis Sharif University of Technology ; Fatemi, Mobin (Supervisor) ; Ghazanfari, Mohammad Hossein (Supervisor)
Abstract
As the reservoir matures, especially in fractured reservoirs, oil production is usually accompanied by the production of some unwanted water. Water production causes environmental problems and imposes high costs on the production system, including the cost of separating water and oil, corrosion of facility, and sometimes, leading to abandoning well. One way to solve this problem is to use gels as a blocking agent. Today, preformed particle gels are used as an alternative to in situ gels, which can solve some issues of in-situ gels, such as uncertainty in gelling time and penetration depth.This research comprises three main parts. In the first part, four samples of preformed particle gels...
Experimental Investigation and Modeling of Flow ّunction Variation in Enhanced oil Recovery Using Low Salinity/Smart Water Injection in a Carbonate Reservoir
, Ph.D. Dissertation Sharif University of Technology ; Ayatollahi, Shahaboddin (Supervisor) ; Fatemi, Mobin (Supervisor)
Abstract
Low salinity water flooding (LSWF) as an efficient enhanced oil recovery (EOR) technique is proved to affect both, fluid-fluid and rock-fluid interactions to potentially release the trapped oil from the porous rock. Despite more than one decade of extensive research works on the low salinity water effect (LSWE), there are still many parameters to be studied for very complex cases. Therefore, in the first part of the experimental study of the dissertation, a systematic investigation on the effect of the initial wetting state (water-wet or oil-wet) of pure calcite is conducted to study the importance of fluid/fluid and fluid/rock interactions for LSWE investigation. In the case of initially...
Compositional Simulation of Reservoirs Using Finite Element Method
, M.Sc. Thesis Sharif University of Technology ; Pishvaie, Mahmoud Reza (Supervisor) ; Mobin, Fatemi (Supervisor)
Abstract
One of the main purposes of this study is to present a robust and yet efficient semi-discretized algorithm for compositional simulation. All the equations including both the mass balance and the phase equilibrium equations are solved simultaneously which forms a Differential-Algebraic set of Equations and is solved by utilizing an efficient MATLAB solver. Furthermore, another formulation and algorithm is proposed which is consisted of two sets of equations, the primary equations (differential mass balance equations) and the secondary equations (the algebraic phase equilibrium equations). The gradient terms in the primary equations are discretized by using finite element method (Galerkin...
Investigating the Role of Molecular Diffusion on the Performance of Non-Equilibrium Gas Injection in One of the Fractured Reservoirs in Iran
, M.Sc. Thesis Sharif University of Technology ; Ghazanfari, Mohammad Hossein (Supervisor) ; Fatemi, Mobin (Supervisor)
Abstract
Major parts of Iran's oil reservoirs are fractured carbonates, which need time to produce oil due to their much lower permeability than sandstone reservoirs. Molecular diffusion mechanism is an efficient mechanism in oil recovery from fractured reservoirs under gas injection conditions. The main subject of this work is to investigate the role of molecular diffusion mechanism in the non-equilibrium gas injection project and its role in increasing the oil recovery rate in two southern fractured reservoirs located in the west of Iran, taking into account the capillary pressure, as well as the change of interfacial tension closely miscible conditions is also investigated through simulation. The...
The moment method for fiber raman amplifier gain ripple minimization
, Article Optics Communications ; Volume 281, Issue 14 , 2008 , Pages 3673-3680 ; 00304018 (ISSN) ; Farman, F ; Ghasempour, A ; Sharif University of Technology
2008
Abstract
We aim to propose a novel fiber Raman amplifier modeling based on the moment method, which is previously introduced for modeling the inhomogeneous Erbium doped fiber amplifiers and recently employed to analyze the fiber Raman amplifier with continuous pump spectrum. In this model, the number of governing equations is independent of the number of signals and according to the degree of accuracy it is proportional to the number of pumps. This method is employed to analyze the Raman fiber amplifiers with an arbitrary input signal line shape and to minimize the gain ripple of the fiber Raman amplifier with respect to the pump powers and pump frequencies. © 2008 Elsevier B.V. All rights reserved
Stochastic Cauchy Problem in UMD Banach Spaces
, M.Sc. Thesis Sharif University of Technology ; Zohuri Zangeneh, Bijan (Supervisor)
Abstract
We discuss, in the setting of UMD Banach spaces E, existence, uniqueness and the continuous dependence on the data A, F, G and of mild solutions of semilinear stochastic evolution equations with multiplicative noise of the form dX(t) = [AX(t) + F(t;X(t))]dt + G(t;X(t))dWH(t); t 2 [0; T]; X(0) = ; Where A generates an analytic C0-semigroup on a UMD Banach space E and WH is a cylindrical Brownian motion with values in a Hilbert space H. We can see that if the mappings F : [0; T] E ! E and G : [0; T] E ! L(H;E) satisfy suitable Lipschitz conditions and is F0-measurable and bounded, then this problem has a unique mild solution.And We arw going to review continuous dependence of the solutions...
Investigating the Effect of Communication of the Family Nature of Business on the Organizational Reputation, Measuring the Mediating Role of Brand Equity and Corporate Social Responsibility
, M.Sc. Thesis Sharif University of Technology ; Khalili Nasr, Arash (Supervisor)
Abstract
According to official statistics, family businesses form the majority of businesses around the world. When we talk about businesses, we are more likely to say that those firms face issues related to family businesses.One of the trending topics that has recently been considered by researchers and a lot of research has been done in this regard, is specific issues related to marketing and branding of family businesses.In this study, we tried to examine the family business brand in terms of reputation. Reputation is the perception in the minds of brand stakeholders about the brand and the organization. So we tried to take as fair and accurate a sample as possible, to seek the opinions of...
Visible light photoinactivation of bacteria by tungsten oxide nanostructures formed on a tungsten foil
, Article Applied Surface Science ; Volume 338 , May , 2015 , Pages 55-60 ; 01694332 (ISSN) ; Azimirad, R ; Amini, A ; Akhavan, O ; Sharif University of Technology
Elsevier
2015
Abstract
Antibacterial activity of tungsten oxide nanorods/microrods were studied against Escherichia coli bacteria under visible light irradiation and in dark. A two-step annealing process at temperatures up to 390 °C and 400-800 °C was applied to synthesize the tungsten oxide nanorods/microrods on tungsten foils using KOH as a catalyst. Annealing the foils at 400 °C in the presence of catalyst resulted in formation of tungsten oxide nanorods (with diameters of 50-90 nm and crystalline phase of WO3) on surface of tungsten foils. By increasing the annealing temperature up to 800 °C, tungsten oxide microrods with K2W6O19 crystalline phase were formed on the foils. The WO3 nanorods showed a strong...
In pursuit of a replacement for conventional high-density polyethylene tubes in ground source heat pumps from their composites – a comparative study
, Article Geothermics ; Volume 87 , September , 2020 ; Fatehifar, M ; Ghasempour, R ; Noorollahi, Y ; Sharif University of Technology
Elsevier Ltd
2020
Abstract
Ground-source heat pumps, as the most environmentally friendly and energy-efficient air conditioning technology, suffer from a great required length of ground heat exchanger, partly arising from the low thermal conductivity of high-density polyethylene tubes commonly used in ground heat exchangers. In an attempt to find a replacement with an acceptable thermal conductivity for high-density polyethylene tubes, in this study, first, a comprehensive comparative study on fillers commonly used in thermally conductive polymer composites and resulting high-density polyethylene composites was conducted. Then, based on the advantages and disadvantages presented, an appropriate composite was selected...
Experimental Investigation on the Performance of Preformed Particle Gel (PPG) in the Combined Injection of Low-Salinity Water and CO2: Conformance Control and for in the Naturally Fractured Systems
, M.Sc. Thesis Sharif University of Technology ; Fatemi, Mobin (Supervisor) ; Ghazanfari, Mohammad Hossein (Co-Supervisor)
Abstract
Excessive water production in highly heterogeneous mature reservoirs (water flooded or affected by water zones) leads to increased production costs. Water production causes sediment formation, creation of corrosion, water treatment and disposal, and finally due to the inefficiency of production, it leads to closure of the well.Among the methods introduced to reduce water production, the use of polymers and gels as an affordable and effective method has been widely used in enhanced oil recovery processes. The main mechanism in this method is blocking or limiting the major paths of water flow (fractures or high permeability zones) and thereby increasing sweep efficiency in water injection....