Sharif Digital Repository

Nowdays, distributed generation (DG) systems based on renewable energy sources have significantly increased around the world as an alternative solution to enhance the power quality and reliability and reduce the need for extensive transmission system as well. An evolved recent concept called microgrid is developed by grouping a cluster of loads and DG units in a common local area which increases the integaration of sustainable energy generation systems. This thesis presents control of a medium voltage (MV) microgrid considering multi-hybrid distributed generation systems (MHGS) and renewable energy resources in island mode. The first part is focused on the development a control strategy for... 

Foam injection for enhanced oil recovery is concerned by petroleum engineers because it decreases adverse effects of fingering and gravity segregation caused by the injected fluid .Obviously foam stability is an important factor in the efficiency of this process. So investigating it is an imperative. One of the ways that less studied and can improve foam stability is using of nanoparticles. In this project effect of nanoparticles on foam stability and displacement mechanism during foam flooding has been discussed.
Study consisted of two sets of experiments. In the first part, the static foam stability in the presence of silica nanoparticles has been investigated. Also influence of... 

Miscible displacement in fluid flowing through a porous medium plays an important role in many environmental and industrial applications; for instance, miscible displacements in enhanced oil recovery processes and pollutant spreading in groundwater. A large number of numerical approaches have been developed to solve the advection-dispersion equation that describes the behavior of miscible displacement in porous media. Most of these numerical models suffer from numerical dispersion. Random walk seems to be an effective method to overcome this problem especially in heterogeneous media. Here, a random walk model was developed and used for simulating miscible displacement in heterogeneous porous... 

One the basic challenges during drilling of both vertical and horizontal wellbores is due to mud filtrate invasion into the formation. Addition of nanoparticles to composition of drilling fluid has been recognized as a measure of control and reduction of filtrate invasion. Despite notable advances in formulation of nano-enhanced drilling fluids, effects of surface wettability of nanoparticles on their performance have not been studied with any precision. Moreover, return permeability of a grain packed porous media after extreme invasion by mud filtrate has not been experimentally measured in a radial system, yet. The last but not least, Generation and development of mud cake opposite the... 

Using foam for reducing undesirable effects of fingering and gravity segregation in enhanced oil recovery through gas injection has attracted a rapidly increasing interest in recent years. Lack of stability of foam often limits its application. However there is a lack of systematic study of effects of unmodified and in-situ modified silica nano-particle on foam stability and foam behavior in the presence and absence of oil and also polymer effects from the prospective of analysis of foam dynamic stability, size of foam bubbles, and foam flow behavior in Hele – Shaw cell. Main objectives of this study are mechanistic investigation of effects of polymer – surfactant systems and in-situ... 

Formation damage in oil and gas wells is mainly induced by drilling operations. Filtrate and particle invasion into formation as the sources of this damage caused serious problems, e.g. reduction of production rates. Therefore numerical modeling of this phenomenon helps us to better understand the process, and as a result, control and reduce formation damage associated with this impairment. In this research, a model to estimate the invasion depth and damage of mud filtrate from water-based mud is presented. Filtrate invasion into the formation is investigated by convection-diffusion equation with regard to dispersion term. The invasion depth is obtained from mud filtrate profile in the... 

Gas injection as an enhanced oil recovery (EOR) method usually suffers from low recovery efficiency. The low viscosity and density of gas as well as reservoir heterogeneity are the main reasons of early breakthrough and override of gas in oil reservoirs. To mitigate the poor sweep efficiency of gas injection, surfactants can be co-injected or injected in an alternating manner with gas to form foam within the reservoir rock. The foam formation can reduce the mobility of the injection fluids in porous media. A significant challenge of foam injection is the stability of the foam in formations and the foam liquid drainage rate is one of the key factors which characterize or show the efficiency... 

Due to the fact that, over 60% of oil reserves are located in fractured reservoirs, this type of reservoirs requires a great deal of attention. The presence of the fractures in porous media results in many complexities in the liquid path and production, consequently, simulation and modeling of flow equations is highly important. In order to achieve a more profound understanding of liquid flow in gravity drainage mechanism, the concept of capillary tubes is initially used. By using the capillary tube concept, at first, the gravity drainage mechanism is investigated in the first block in a stack of blocks and an analytical solution is presented for this case. Then, the stack of blocks is... 

In this work, flow transport, distribution, and dissolution of non-aqueous phase liquids (NAPLs) in heterogeneous porous media were modeled by focusing on the dissolution process in pore-level and field scale. First, by adopting advection-diffusion and mass transfer equations, dissolution process and NAPL distribution were investigated in a heterogeneous porous media using pore network modeling. The 2-D developed model was based on observations of micromodel tests. The pore scale simulator which adopted by this work was improved in some aspects in comparison to previous models in the literatures. First, in the phase displacement, by considering more realistic geometries for pore structure... 

Gas injection is one of the common methods for enhance oil recovery from oil reservoirs. At miscible injection condition, the efficiency of the process is majorly affected by the molecular diffusion coefficient of the gas in the oil. Therefore, the accurate value of this coefficient is an essential for applying in reservoir simulator. However, determination of this coefficient only is possible through experimental methods. In this study, pressure decay method was applied to determine the diffusion coefficient of nitrogen, methane and carbon dioxide gases in crude oil. The reasons for choosing this method are : accuracy in designing the experiment, covering a wide range of pressure... 

gas injection method is one of the common methods of EOR, which has a long history. In gas injection, molecular entry gas mixing is the controlling factor of oil play. Therefore, the exact value of this coefficient becomes an important requirement for the simulation and modeling of oil reservoirs, which can only be determined by laboratory consumption methods. In this research, the pressure decay method is used as a common laboratory method to determine the penetration coefficient of methane, nitrogen and gas enriched with intermediate compounds in crude oil of one of Iran's oil reservoirs. In most of the available records in the investigation of the mentioned gas diffusion coefficient in... 

Fractured reservoirs have allocated a significant portion of Iran's and the world's oil and gas reserves, underscoring the importance of predicting the performance of these reservoir types in the oil and gas industry. Predicting the performance of fractured reservoirs by professional reservoir simulators, especially in enhanced recovery conditions, requires precise information on fracture flow functions, which is often limited. These functions vary for each reservoir based on the distinct characteristics of the rock and fluid, and the only way to determine them is through appropriate laboratory experimentation and modeling of the results. Currently, in simulation models, the relative... 

Most of oil content, especially in Iran, has been reserved in fractured reservoirs, so study and modeling of production mechanism of these reservoirs are great of importance. Gravity drainage is one of these effective production mechanisms in fractured porous media which dynamic pore scale modeling of this mechanism will lead to better understanding of it. In this work, the effects of variety of parameters such as oil gravity, interfacial tension between oil and gas, pore and throat size distribution, fracture aperture, and block to block interaction (capillary continuity and reinfiltartion) have been investigated. So developed simulator in this work has two main and separated parts, which... 

In the recent years, there has been an increasing attention toward usage of ultrasonic for enhanced oil recovery practices. But, thorough knowledge of active mechanisms and spreading and characterization of developed fingers during this practice is not available. From the other hand, due to limited amount of light oil fields, more attentions towards recovery from heavy oils is the need of the hour. Documents show that the big issues during the enhanced oil recovery from heavy crudes are high density of reservoir oil as well as poor development of fingers during injection due to high mobility ratios. In this study, results of ultrasound effect on the heavy oil recovery and its effect on the... 

The behavior of two-phase flow in porous media is influenced by the flow functions. Especially in fractured porous media where the relative permeabilities of the phases in the fracture and matrix are different, the flow behavior is significantly affected by these functions. On the other hand, the properties of the fluid and the fracture, such as length, orientation, and roughness of the fracture, also play an important role in determining the values of relative permeabilities and, consequently, the behavior of two-phase flow. However, the influence of fracture geometric properties on the relative permeability curves in fractured porous media is not well understood. In this study, firstly, a... 

The purpose of this study was to investigate the experimental and modeling of the drop formation process on calcite rock and calcite aged in nano fluid surfaces in order to analyze size dependent contact angle and wettability modification. To do this, the calcite surfaces were prepared by cutting to an approximately size of 3*3*0.4 cm and grinded and polished to achieve different roughnesses. The purity and roughness of the samples were determined by X-ray diffraction and atomic force microscopy, respectively. In order to conduct the dynamic and static contact angle measurements on the calcite surface in vapor saturated condition, a small laboratory device was designed. The advanced contact... 

This work concerns with experimental and modeling investigation of the asphaltene damage removal using ultrasonic wave irradiation. A specific core holder apparatus was designed and utilized for in situ ultrasonic exposure to damaged core plug at different conditions of exposure time, ultrasound power and distances between sound source and plug. Injection of many pore volumes of an asphaltenic crude oil was used for creating asphaltene induced damaged in porous media through permeability measurements. The deposited asphaltene during oil injection as well as asphaltene removal due to ultrasonic exposure was evaluated using IP-143 analysis. The results revealed that ultrasound application... 

Nowadays, due to limitation of production from conventional oil reservoirs, enhanced recovery from heavy oil reservoirs is of great concern. However, production from these energy resources is not a simple task and production using common technologies is not easily exploitable. Heterogeneous structure and also high surface tension between injected fluid and reservoir oil are of the main challenges during water flooding processes in heavy oil reservoirs. The high surface tension force causes a large part of the oil remains in the reservoir after the water flooding operation. One method for overcoming this problem is the use of surfactants that reduces capillary forces and consequently... 

Oil reservoir Protection and production optimization requires the proper use of EOR methods. One of the conventional methods of EOR is chemical flooding (for example polymer, alkaline – Polymer, Nano - Polymer and Alkaline - Nano – Polymer flooding) which used for controlling mobility ratio of fluid within a reservoir, altering surface tension between fluids, and change reservoir wettability. On the other hand prediction of oil production in reservoirs during chemical injection processis impossible without having two-phase relative permeability functions and meanwhile, data from the experimental results of these functions are limited.In this study, effect of polymer type and concentration in... 

Most of the Iranian oil reservoirs are reaching end of their natural production life, hence they are suitable candidates for EOR common processes like gas injection and WAG injection. Studies have shown that gas and WAG injection can be applied for optimal oil production. Past studies have been mainly on gas and WAG injection in immiscible or fully miscible conditions and there is a limited amount of data available on performance of these methods in near miscible conditions. Miscible injection is not feasible in old Iranian oil reservoirs due to their depleted pressure. Moreover injection in lower pressures is attractive from both economical and operational standpoints since this reduces the...