Sharif Digital Repository

In this paper, entropy generation in heat exchangers used in Indirect Evaporative Coolers (IDECs) is studied. First, expressions for the rate of entropy generation in tube-type and plate-type cross-flow heat exchangers used as IDECs are obtained. Then, by introducing appropriate geometric constraints and employing thermohydraulic design equations, the variation of the rate of entropy generation within the heat exchangers is investigated. The maximum EER, outlet temperatures and the optimum sizes are obtained for several cases. The results of several experiments conducted on an optimum tube-type experimental prototype are presented and compared with the numerical data. Copyright © 2009... 

Due to the complexity of the human spinal motion segments, the intervertebral joints are often simulated in the musculoskeletal trunk models as pivots thus allowing no translational degrees of freedom (DOFs). This work aims to investigate, for the first time, the effect of such widely used assumption on trunk muscle forces, spinal loads, kinematics, and stability during a number of static activities. To address this, the shear deformable beam elements used in our nonlinear finite element (OFE) musculoskeletal model of the trunk were either substantially stiffened in translational directions (SFE model) or replaced by hinge joints interconnected through rotational springs (HFE model). Results... 

The growing rate of population and technological advancement have led to an increase in natural resource consumption, which has caused irreparable damage to the environment. The implementation of green supply chain management is one of the most effective ways to deal with environmental degradation. Therefore, in this paper, a bi-objective mixed integer linear programming model is developed to design a green supply chain network. In the proposed model, the possibility of customer storage, being faced with shortage, locating of distribution centres, green vehicle routing problem, split delivery, multi-depot vehicle routing problem (VRP), capacitated VRP, and uncertainty in demands will be... 

Supplier selection is an important and challenging problem in sustainable supply chain management. We propose a dynamic decision support system (DSS) for sustainable supplier selection in circular supply chains. Unlike the linear take-make-waste-dispose production systems, circular supply chains are nonlinear make-waste-recycle production systems with zero-waste vision. The proposed DSS allows users to customize and weight their economic, social, and circular criteria with a fuzzy best-worst method (BWM) and select the most suitable supplier with the fuzzy inference system (FIS). Machine learning is used to maintain and synthesize the criteria scores for the suppliers after each supplier... 

Supplier selection is an important and challenging problem in sustainable supply chain management. We propose a dynamic decision support system (DSS) for sustainable supplier selection in circular supply chains. Unlike the linear take-make-waste-dispose production systems, circular supply chains are nonlinear make-waste-recycle production systems with zero-waste vision. The proposed DSS allows users to customize and weight their economic, social, and circular criteria with a fuzzy best-worst method (BWM) and select the most suitable supplier with the fuzzy inference system (FIS). Machine learning is used to maintain and synthesize the criteria scores for the suppliers after each supplier... 

The performance of perturbation method in nonlinear analyses of plates subjected to mechanical, thermal, and thermo-mechanical loadings is investigated. To this end, cylindrical bending of FG plates with clamped and simply-supported edges is considered. The governing equations of Mindlin's first-order shear deformation theory with von Kármán's geometric nonlinearity are solved using one- and two-parameter perturbation methods and the results are compared with the results of an analytical solution. The material properties are assumed to vary continuously through the thickness of the plate according to a power-law distribution of the volume fraction of the constituents. It is shown that the... 

The performance of perturbation method in nonlinear analyses of plates subjected to mechanical, thermal, and thermo-mechanical loadings is investigated. To this end, cylindrical bending of FG plates with clamped and simply-supported edges is considered. The governing equations of Mindlin's first-order shear deformation theory with von Kármán's geometric nonlinearity are solved using one- and two-parameter perturbation methods and the results are compared with the results of an analytical solution. The material properties are assumed to vary continuously through the thickness of the plate according to a power-law distribution of the volume fraction of the constituents. It is shown that the... 

In the eld of supply chain, selecting a suitable green supplier could signi cantly help us decrease the cost and risks of the operations and increase the quality of green supply. This paper develops an integrated two-stage approach based on Fuzzy Analytic Hierarchy Process (FAHP) and multi-objective mixed-integer linear programming to select suppliers and allocate order in the green supply chain. In the rst stage, suppliers are evaluated using FAHP method and in the second stage, a multi-product multi-period supply chain is developed considering green location-routing problem, discounting, and time window under uncertainty. Then, a fuzzy solution approach is applied to solve the proposed... 

Excessive loads on the human spine is recognized as a risk factor for back injuries/pain. Various lifting analysis tools such as musculoskeletal models, regression equations and NIOSH (National Institute for Occupational Safety and Health) lifting equation (NLE) have been proposed to evaluate and mitigate associated risks during manual material handling activities. Present study aims to compare predicted spinal loads from 5 different lifting analysis tools as well as to critically evaluate the NIOSH recommended weight limit (RWL). Spinal loads were estimated under different symmetric/asymmetric lifting tasks in which hand-load mass at each task was set based on RWL from NLE. Estimated... 

This paper presents the results of a series of shake table tests carried out on a half-scale single-story unreinforced masonry building with asymmetric openings. First, the unretrofitted building is subjected to seven increasing steps of bidirectional seismic excitation. The damaged building is then rehabilitated using steel mesh and shotcrete layer with two walls retrofitted from the exterior face and the other two from the interior face. Afterward, the shake table test is again conducted on the retrofitted specimen in nine increasing excitation levels. Three cases of interior-to-interior, interior-to-exterior, and exterior-to-exterior shotcrete connections are considered at the... 

The increasing level of customer awareness and application of environmental laws by governments, on the one hand, and the increasing number of competitors, on the other hand, has obliged industry owners to include green activities in the design of the supply chain network. Green activities include any type of action that reduces environmental degradation. Hence, this study seeks to develop a bi-objective, mixed integer linear programming (MILP) model for designing a green supply chain network. In the proposed model, the minimisation of costs and detrimental environmental effects are discussed. LP metric method is used to solve the bi-objective model and the proposed model is run by using... 

As a primary load-resisting component, annulus fibrosus (AF) maintains structural integrity of the entire intervertebral disc. Experiments have demonstrated that permanent deformation and damage take place in the tissue under mechanical loads. Development of an accurate model to capture the complex behaviour of AF tissue is hence crucial in disc model studies. We, therefore, aimed to develop a non-homogenous model to capture elastic, inelastic and failure responses of the AF tissue and the entire disc model under axial load. Our model estimations satisfactorily agreed with results of existing uniaxial (along fiber, circumferential and axial directions) and biaxial tissue-level tests. The... 

Background Motor control exercise was claimed to improve spinal stability in patients with chronic non-specific back pain, but to investigate the effectiveness of this exercise, other outcome measures have been used rather than spinal stability itself. The aim of our study is to assess motor control exercise effects on spinal stability using a biomechanical model. Methods Fifty-one patients were assigned to either motor control or general exercises. Before and after trainings, participants were tested for spinal stability at seven isometric tasks. Electromyography signals were recorded from ten superficial muscles, and a hybrid EMG-driven musculoskeletal model estimated spinal stability...