Loading...
Search for:
ghiasi--mina
0.117 seconds
The Study of Antioxidant Mechanism of some Flavonoids without and in Presence of Cyclodextrins: Theoretical Point of View
, Ph.D. Dissertation Sharif University of Technology ; Tafazzoli, Mohsen (Supervisor) ; Ghiasi, Mina (Co-Supervisor)
Abstract
Antioxidants are compounds with anti-cancer, anti-bacterial, anti-viral, anti-aging and anti-allergic properties. In the present study, a quantum mechanical approach has been used to shed light on the presence effect of glycoside group on the antioxidant ability of chrysin as one of the most important consumable flavonoids and two glycoside derivatives, chrysin-6-C-fucopyranoside and chrysin-3-malonyl-6-C-fucopyranoside which has electron-withdrawing group (EWG) in its C3 of glycoside group. Density functional theory (DFT) using B3LYP and UB3LYP functional and split-valance 6-311++G ** basis set were used to optimize chrysin, its different derivatives, and their radicals. Analysis of...
Chemometrics-assisted isotope ratio fingerprinting based on gas chromatography/combustion/isotope ratio mass spectrometry for saffron authentication
, Article Journal of Chromatography A ; Volume 1657 , 2021 ; 00219673 (ISSN) ; Parastar, H ; Sharif University of Technology
Elsevier B.V
2021
Abstract
In the present contribution, the capability of isotopic ratio mass spectrometry (IRMS) for saffron authentication and detection of four common plant-derived adulterants (marigold flower, safflower, rubia, and saffron style) was investigated. For this purpose, 62 authentic saffron samples were analyzed by elemental analyzer-IRMS (EA-IRMS) and gas chromatography-combustion-IRMS (GC-C-IRMS). In this regard, EA-IRMS and GC-C-IRMS isotope fingerprints of carbon-13 and nitrogen-15 isotopes of saffron components were provided and then analyzed by chemometric methods. Principal component analysis (PCA) showed two different behaviors regarding two main regions. Then, a representative saffron sample...
An Integrated Land-Use and Transportation Model for the Evaluation of Urban Development Decisions
, M.Sc. Thesis Sharif University of Technology ; Poorzahedy, Hossain (Supervisor)
Abstract
Land-use and transportation are inter-related, such that land-use may be used to control transportation. This study aims to design a suitable combination of the residential and service land-use on one side, and the transportation system on the other side. The model presented in this study has two external and internal levels, and its objective is to minimize the cost of residence, receiving goods and services, and transportation. The performance of any combination of spatial allocation of population and employment, as well as transportation, is evaluated by the internal level of the model which determines the interaction between population, employment, and transportation. This is done by a...
Cramér’s Model for Random Primes
, M.Sc. Thesis Sharif University of Technology ; Alishahi, Kasra (Supervisor)
Abstract
With Cramer’s model we have a probability measure on the power set of N. This probability measure is concentrated on the set that its elements are that subsets of N which number of their elements up to a certain natural number is asymptotically equal with the number of primes up to the same number. Let Pc be a sample obtained from this probability measure and consider 8n 2 N, an counts the number of ways that ncan be represented as a multiplication of some elements of Pc, such that changing the arrangement of factors in a representation does not introduce a new one. In this thesis, we prove that limn!1 a1++an n almost surely exists and is positive
Study & Analysis of Delays Causes of Gas Projects in Tehran Gas Company & presenting Optimized Solutions by Applying Project Management Principles
, M.Sc. Thesis Sharif University of Technology ; Mostafavi, Mostafa (Supervisor)
Abstract
To deliver gas in time to different consumers like as industrial, commercial and domestic users is one of the most important parts in gas industry. So it is very important to utilize these projects in the specified time. There are huge harms for client, contractors and consumers when there is a delay in project utilization. To identify effective parameters on delays to remove them in future is an essential factor. In this research, all delay causes for TPGC (Tehran Province Gas Company) projects are analyzed and some solutions to remove these delays are presented. 10 hypotheses in relation of gas delivery have been assumed as delay causes. Then some questions have been discussed in relation...
Green supply chain network design considering inventory-location-routing problem: A fuzzy solution approach
, Article International Journal of Logistics Systems and Management ; Volume 35, Issue 4 , 2020 , Pages 436-452 ; Ashoftehfard, A ; Mina, H ; Sharif University of Technology
Inderscience Publishers
2020
Abstract
The growing rate of population and technological advancement have led to an increase in natural resource consumption, which has caused irreparable damage to the environment. The implementation of green supply chain management is one of the most effective ways to deal with environmental degradation. Therefore, in this paper, a bi-objective mixed integer linear programming model is developed to design a green supply chain network. In the proposed model, the possibility of customer storage, being faced with shortage, locating of distribution centres, green vehicle routing problem, split delivery, multi-depot vehicle routing problem (VRP), capacitated VRP, and uncertainty in demands will be...
A dynamic decision support system for sustainable supplier selection in circular economy
, Article Sustainable Production and Consumption ; Volume 27 , 2021 , Pages 905-920 ; 23525509 (ISSN) ; Tavana, M ; Mina, H ; Sharif University of Technology
Elsevier B.V
2021
Abstract
Supplier selection is an important and challenging problem in sustainable supply chain management. We propose a dynamic decision support system (DSS) for sustainable supplier selection in circular supply chains. Unlike the linear take-make-waste-dispose production systems, circular supply chains are nonlinear make-waste-recycle production systems with zero-waste vision. The proposed DSS allows users to customize and weight their economic, social, and circular criteria with a fuzzy best-worst method (BWM) and select the most suitable supplier with the fuzzy inference system (FIS). Machine learning is used to maintain and synthesize the criteria scores for the suppliers after each supplier...
A dynamic decision support system for sustainable supplier selection in circular economy
, Article Sustainable Production and Consumption ; Volume 27 , 2021 , Pages 905-920 ; 23525509 (ISSN) ; Tavana, M ; Mina, H ; Sharif University of Technology
Elsevier B.V
2021
Abstract
Supplier selection is an important and challenging problem in sustainable supply chain management. We propose a dynamic decision support system (DSS) for sustainable supplier selection in circular supply chains. Unlike the linear take-make-waste-dispose production systems, circular supply chains are nonlinear make-waste-recycle production systems with zero-waste vision. The proposed DSS allows users to customize and weight their economic, social, and circular criteria with a fuzzy best-worst method (BWM) and select the most suitable supplier with the fuzzy inference system (FIS). Machine learning is used to maintain and synthesize the criteria scores for the suppliers after each supplier...
Dynamic stereochemistry of rutin (vitamin P) in solution: Theoretical approaches and experimental validation
, Article Carbohydrate Research ; Volume 345, Issue 12 , 2010 , Pages 1760-1766 ; 00086215 (ISSN) ; Taheri, S ; Tafazzoli, M ; Sharif University of Technology
2010
Abstract
The 3D structure of vitamin P, an important bioflavonoid, has been studied in solution by 2D NMR spectroscopy and QM calculations. Rutin, vitamin P, was extracted from Salvia macrosiphon and identified by 1H, 13C, 1H-1H COSY, HMQC, and HMBC spectroscopy. In parallel, density functional theory (DFT) using B3LYP functional and split-valance 6-311G basis set has been used to optimize the structures and conformers of rutin. Also experimental and theoretical methods have been used to correlate the dependencies of 1J, 2J, and 3J involving 1H and 13C on the C5″-C6″ (ω), C6″-O6″ (θ), and C1‴-O6″ () torsion angles in the glycosidic moiety. New Karplus equations are proposed to assist in the...
Chrysin/β-cyclodextrin supramolecular system: a quantum mechanical investigation
, Article Journal of the Iranian Chemical Society ; Volume 15, Issue 10 , 2018 , Pages 2401-2410 ; 1735207X (ISSN) ; Gerayeli, N ; Tafazzoli, M ; Sharif University of Technology
2018
Abstract
Chrysin is a bioflavonoid which possesses a wide range of important biological activities. In present study, we used a quantum mechanical approach to shed light on the antioxidant ability and antioxidant mechanism of chrysin to scavenge hydroxyl radical (˙OH) in solution phase. The analysis of the theoretical bond dissociation enthalpy (BDE) values and spin density of the radicals to determine the delocalization possibilities at B3LYP/6-311++G** level clearly shows the importance of the A-ring and the 7-OH group in antioxidant reactivity. In the next step, the inclusion of chrysin with β-CD has been investigated extensively using theoretical methods. Density functional theory (M05-2X)...
The Control of an exoskeleton and the reduction of interaction force using human intent detection by EMG signals and torque estimation
, Article Proceedings of the 6th RSI International Conference on Robotics and Mechatronics, IcRoM 2018, 23 October 2018 through 25 October 2018 ; 2019 , Pages 536-541 ; 9781728101279 (ISBN) ; Vossoughi, G. R ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2019
Abstract
Disability and motor disorders are some of the problems that people may face due to some factors such as accident, spinal cord injuries, brain damage, and the presence of a problem in neurological commands due to stroke. One of the proposed methods for solving the problems of these people is the use of exoskeletons to generate movement. The main goal of this paper is the control of Sharif Exoskeleton Robot and the reduction of interaction force between user and robot by using human intent detection. This goal is done by estimating the knee torque of one degree of freedom in a swing phase using Hill model based on the EMG data from the thigh muscles. Accordingly, the calibration algorithm is...
Role of axial ligand on the electronic structures of active intermediates in cytochrome P-450, peroxidase and catalase
, Article Journal of Molecular Structure: THEOCHEM ; Volume 820, Issue 1-3 , 2007 , Pages 18-25 ; 01661280 (ISSN) ; Tafazzoli, M ; Safari, N ; Sharif University of Technology
2007
Abstract
DFT method (B3LYP) with 6-31G* basis set was utilized in the computation of a fully optimized structure, net atomic charges and spin densities of the intermediate of cytochrome P-450-oxoiron(IV) porphyrin cation radical, compound I - in the presence of axial ligand such as thiolate (SMe-) imidazole (IM), phenoxide (OPh-), methoxide (OMe-) and chloride (Cl-). The results show doublet states in compound I are about 2-4 kcal/mol more stable than quartet states for all aforementioned ligands, and the doublet state is the ground state in all cases. However, electron donor ability of the ligands are in the order of SMe- > IM > OMe- > OPh- > Cl-. Also the active oxidant intermediate of cytochrome...
Knee Joint Torque Estimation using EMG Signals for Sharif Exoskeleton Control Applications
, M.Sc. Thesis Sharif University of Technology ; Vossoughi, Gholamreza (Supervisor)
Abstract
The human body has more than 600 muscles that cause movement. Disability and motor disorders are some of the problems that people may face due to some factors such as accident, spinal cord injuries, disorders and brain damage, and the presence of a problem in neurological commands due to stroke. One of the proposed methods for solving the problems of people with motor disorder is the use of exoskeletons to generate stimulus. Exoskeletones are electromechanical devices designed to assist human movement, and patients are used to correct their movements using specific motor patterns. Exoskeletones can also be used as an auxiliary device for carrying heavy loads. Many studies have been conducted...
Development of Chemometric Methods Combined with Isotope Ratio Mass Spectrometry (IRMS) for Isotope Pattern Recognition and Adulteration Detection in Foods
, M.Sc. Thesis Sharif University of Technology ; Parastar Shahri, Hadi (Supervisor)
Abstract
The purpose of this study was to investigate the capability of Isotopic Ratio Mass Spectrometry (IRMS) in the detection of four common natural plant frauds in saffron, namely Marigold flower, Safflower, Rubia and Saffron Style. For this purpose, first natural saffron isotopes were analyzed and used to investigate fingerprints of carbon-13 and nitrogen-15 isotopes by Elemental Analyzer Isotopic Ratio Mass Spectrometry (EA-IRMS) and carbon-13 isotopic ratio of saffron components by Gas Chromatography Isotopic Ratio Mass Spectrometry (GC-C-IRMS). Then, according to the isotopic behavior of the original saffron, they were sampled to form a mixture of saffron that is representative of the...
A fuzzy solution approach to supplier selection and order allocation in green supply chain considering the location-routing problem
, Article Scientia Iranica ; Volume 28, Issue 1 E , 2021 , Pages 446-464 ; 10263098 (ISSN) ; Haji, A ; Mina, H ; Sharif University of Technology
Sharif University of Technology
2021
Abstract
In the eld of supply chain, selecting a suitable green supplier could signi cantly help us decrease the cost and risks of the operations and increase the quality of green supply. This paper develops an integrated two-stage approach based on Fuzzy Analytic Hierarchy Process (FAHP) and multi-objective mixed-integer linear programming to select suppliers and allocate order in the green supply chain. In the rst stage, suppliers are evaluated using FAHP method and in the second stage, a multi-product multi-period supply chain is developed considering green location-routing problem, discounting, and time window under uncertainty. Then, a fuzzy solution approach is applied to solve the proposed...
Throughput-memory footprint trade-off in synthesis of streaming software on embedded multiprocessors
, Article Transactions on Embedded Computing Systems ; Volume 13, Issue 3 , December , 2013 ; 15399087 (ISSN) ; Foroozannejad, M. H ; Ghiasi, S ; Sharif University of Technology
2013
Abstract
We study the trade-off between throughput and memory footprint of embedded software that is synthesized from acyclic static dataflow (task graph) specifications targeting distributed memory multiprocessors. We identify iteration overlapping as a knob in the synthesis process by which one can trade application throughput for its memory requirement. Given an initial processor assignment and non-overlapped task schedule, we formally present underlying properties of the problem, such as constraints on a valid iteration overlapping, maximum possible throughput, and minimum memory footprint. Moreover, we develop an effective algorithm for generation of a rich set of design points that provide a...
Low-Frequency model for hand-calculations in circuit design with TMDC-based transistors
, Article IEEE Transactions on Electron Devices ; Volume 66, Issue 11 , 2019 , Pages 5011-5018 ; 00189383 (ISSN) ; Safarian, A ; Pourfath, M ; Sharif University of Technology
Institute of Electrical and Electronics Engineers Inc
2019
Abstract
This article presents an applicable intuitive current-voltage model for long-channel transistors based on 2-D materials. This model carefully predicts the transistor behavior in the saturation and triode regions, which are important for analog and digital applications. Moreover, the effect of mobility degradation on the characteristics of the transistor is probed. As a case study, the developed model has been applied to a transistor with mono-layer MoS2 as the channel material. The excellent agreement with experimental data verifies the accuracy of the model. Finally, the introduced model has been utilized to design an amplifier, a differential pair, and a low-frequency common source mixer...
A green closed-loop supply chain network: A bi-objective mixed integer linear programming model
, Article International Journal of Operational Research ; Volume 41, Issue 4 , 2021 , Pages 492-513 ; 17457645 (ISSN) ; Salehian, F ; Lamouchi, H ; Mina, H ; Sharif University of Technology
Inderscience Publishers
2021
Abstract
The increasing level of customer awareness and application of environmental laws by governments, on the one hand, and the increasing number of competitors, on the other hand, has obliged industry owners to include green activities in the design of the supply chain network. Green activities include any type of action that reduces environmental degradation. Hence, this study seeks to develop a bi-objective, mixed integer linear programming (MILP) model for designing a green supply chain network. In the proposed model, the minimisation of costs and detrimental environmental effects are discussed. LP metric method is used to solve the bi-objective model and the proposed model is run by using...
Using Supported Ionic Liquid Membranes (SILMs) for Selective Separation of CO2/CH4
, M.Sc. Thesis Sharif University of Technology ; Rashtchian ,Davood (Supervisor) ; Adibi, Mina (Supervisor)
Abstract
Supported Ionic Liquid Membranes (SILMs) are fabricated by saturating the pores of a porous support with ionic liquids. To assess the performance of SILMS, it is necessary to obtain data about the properties of ionic liquids such as diffusivity, solubility, and etc. To accomplish this task, in this project the permeability and diffusivity of CO2 and CH4 through three immidazolium-based ionic liquids: [bmim][PF6], [hmim][Tf2N], and "1-methyl-3-(3- tri methoxi silil propyl) imidazolium bis (tri fluoro methyl solphonyl)" , in the temperature range between 27-45 ℃ and pressures within 10-50 kPa, are measured. It is shown in data validation section that the results of this study are in good...
Optimization of Production of Biodiesel
,
M.Sc. Thesis
Sharif University of Technology
;
Rashtchian, Davood
(Supervisor)
;
Adibi, Mina
(Supervisor)
Abstract
Reduction in the oil reserves level and the increasing of fossil fuel prices and GHG has led to growing value of attention to biodiesel. Reserves of fossil fuels are running out and should have proper alternative for them. Environmental benign and renewable properties of biodiesel make it consider suitable candidate to replace fossil fuels.
In this study, continuous production of biodiesel and optimization of important and influential parameters have been investigated. The method is concluded of trans esterification of soya oil with methanol as feed in presence of homogeneous catalyst of NaOH. The reactor was simple with high efficiency and low operational and investment cost. The...
In this study, continuous production of biodiesel and optimization of important and influential parameters have been investigated. The method is concluded of trans esterification of soya oil with methanol as feed in presence of homogeneous catalyst of NaOH. The reactor was simple with high efficiency and low operational and investment cost. The...