Loading...
Search for:
gholi--h
0.118 seconds
Total 9437 records
Evaluation of Effective Factors on Utility of Urban Bus for Work Trips (Case Study: Regular Bus of the City of Tehran)
, M.Sc. Thesis Sharif University of Technology ; Kermanshah, Mohammad (Supervisor)
Abstract
Improvement of public transportation systems through attention to service quality of these systems, is important in order to increase the use of these systems. Various quantitative and qualitative attributes of travel are known effective on service quality of public transportation. The investigated factors in this research, with refrence to regular bus system of the city of Tehran, are: in-vehicle time, fare, crowding and headway. For this purpose, the stated preference data of the respondents who travel to work by regular bus, collected. The survey was conducted during the last month of spring and 360 questionnaires were completed. Stated preference scenarios relating to aforementioned...
Investigating the sources of heterogeneity in passengers’ preferences for transit service quality
, Article Journal of Public Transportation ; Volume 24 , 2022 ; 1077291X (ISSN) ; Kermanshah, M ; Reza Mamdoohi, A ; Sharif University of Technology
Elsevier B.V
2022
Abstract
Improving the service quality of public transport is necessary to maintain the loyalty of current users and attract new travelers. Past studies show that users’ preferences for transit service quality are heterogeneous, but recognizing the factors describing this heterogeneity has not been investigated in depth. This paper aims to evaluate the sources of heterogeneity in passengers’ preferences for service attributes of bus transit regarding the regular bus system in the city of Tehran. Four attributes of bus travel, including in-vehicle travel time, fare, vehicle crowding, and headway, were considered. Stated preference (SP) data of 360 commuters with work purpose was collected through...
Analysis of Degradation for Laminated Notched Plate in Micromechanics by “Strain Energy Release Rate” Method and Illustrations the Results in Ansys
, M.Sc. Thesis Sharif University of Technology ; Hosseini Kordkheili, Ali (Supervisor)
Abstract
By developing composites, difficulties of modeling of degradation of properties as stiffness is most considered. The recent advances in the modeling of degradations in stratified composites have led to improved models on all scales. Macro scales methods are good to estimate fracture but not to estimate the failure in micro scale (as microcrack) and moreover, they need many experimental data. Therefore by considering a stratified structure which contains fiber, matrix and intermediate area, mesoscale modeling method is most suitable. In this research Micromechanical Progressive Algorithm (MPA) is used. The method employed is Micromechanic Method of Fracture (MMF). In this work by developing a...
Enhancement of the MAC Layer of Mobile Broadband Wireless Access Network
, M.Sc. Thesis Sharif University of Technology ; Ajorloo, Hossein (Supervisor)
Abstract
Mobile Broadband Wireless Access technologies provide mobile users with broadband services, for example music downloading, online games and etc. IEEE 802.20 standard is one of the Mobile Broadband Wireless Access technologies , which has been published to support mobile users with high vehicular speed up to 250(km/h). The issue studied in this research is enhancement of MAC layer in IEEE 802.20 standard.
By having this intention in mind we firstly developed a simulator for IEEE 802.20 MAC layer implementation , then we tried implementing 3 different approaches for connecting mobile users to a new network in order to analyze their performance. Then we provided a method for decreasing...
By having this intention in mind we firstly developed a simulator for IEEE 802.20 MAC layer implementation , then we tried implementing 3 different approaches for connecting mobile users to a new network in order to analyze their performance. Then we provided a method for decreasing...
Structure of human errors in tasks of operators working in the control room of an oil refinery unit
, Article Indian Journal of Science and Technology ; Volume 5, Issue 2 , Feb , 2012 , Pages 2065-2070 ; 09746846 (ISSN) ; Jafari, M. J ; Ghalehnoi, M ; Mehrabi, Y ; Ghadiri, M ; Nikbakht, M ; Sharif University of Technology
2012
Abstract
In the present research, human errors existed in tasks of operators working in two control rooms (Northern and Southern control rooms) in the Tehran oil refinery are identified and evaluated. Then, corrective strategies and actions are advised to decrease errors. At first, using hierarchical task analysis (HTA) method, four positions including shift controller, head operators, control room's operators, and outside operators are analyzed. Afterwards, human errors in the considered positions are identified and assessed using technique for retrospective and predictive analysis of cognitive errors (TRACEr). Results present 670 internal errors and 738 external errors in the Northern sector while...
Relay Selection for Machine-to-Machine Communication with the Same Source Requests in Heterogeneous Wireless Networks
, Ph.D. Dissertation Sharif University of Technology ; Hemmatyar, Ali Mohammad Afshin (Supervisor) ; Bayat, Siavash (Co-Supervisor)
Abstract
Machine-to-machine communication (M2M) can be considered as one of the most important types of high-density communication in the Internet of Things (IoT). Therefore, how to send data using the cooperation of machines with each other and selecting the appropriate relay can play an effective role in improving the quality of network communication, especially when communication between sources and their destinations is weak. Since in the real world some of the applications used on a set of IoT machines require the similar bandwidth, we also followed this assumption. For this purpose, we went through three steps in this thesis. First, two new relay selection algorithms with static RF interface...
Nonlinear interstory drift contours for idealized forward directivity pulses using "modified fish-bone" models
, Article Advances in Structural Engineering ; Volume 18, Issue 5 , May , 2015 , Pages 603-627 ; 13694332 (ISSN) ; Khosravi, H ; Jamnani, H. H ; Sharif University of Technology
Multi-Science Publishing Co. Ltd
2015
Abstract
Four 5-, 10-, 20- and 30-story moment frames, representing low-, mid-, and two high-rise structures, were subjected to a great number of idealized directivity pulses. The amplitudes and periods of pulses vary from 0.02 g to 1.0 g and 0.5 to 12 sec, respectively. Over 1400 nonlinear dynamic analyses of low- to high-rise moment frames were performed which were feasible through using modified fish-bone model. The distribution of interstory drift along the height was studied and two applied contours were proposed: (i) the maximum interstory drift contour, and (ii) the critical story contour. These contours were demonstrated versus the ratio of natural period of the structure to the pulse period...
Analysis of singularities of a 3DOF parallel manipulator based on a novel geometrical method
, Article 8th Biennial ASME Conference on Engineering Systems Design and Analysis, ESDA2006, Torino, 4 July 2006 through 7 July 2006 ; Volume 2006 , 2006 ; 0791837793 (ISBN); 9780791837795 (ISBN) ; Sadeghian, H ; Roozbehani, H ; Zohoor, H ; Sharif University of Technology
2006
Abstract
In this article singular points of a parallel manipulator are obtained based on a novel geometrical method. Here we introduce the constrained plain method (CPM) and some of its application in parallel mechanism. Given the definition of constraint plane (CP) and infinite constraint plane (ICP) the dependency conditions of constraints is achieved with the use of a new theorem based on the Ceva geometrical theorem. The direction of angular velocity of a body is achieved by having three ICPs with the use of another theorem. Finally, with the use of the above two novel theorems singularities of the 3UPF_PU mechanism are obtained. It should be emphasized that this method is completely geometrical,...
Melting enthalpy and entropy of freestanding metallic nanoparticles based on cohesive energy and average coordination number
, Article Journal of Physical Chemistry C ; Volume 115, Issue 35 , August , 2011 , Pages 17310-17313 ; 19327447 (ISSN) ; Delavari H., H ; Madaah Hosseini, H. R ; Sharif University of Technology
2011
Abstract
An analytical model is proposed to study the effect of particle size on melting enthalpy and entropy of metallic nanoparticles (NPs). The Mott's and Regel's equations for melting entropy in the combination of core average coordination number (CAC) and surface average coordination number (SAC) of freestanding NPs are considered. Clusters of icosahedral (IC), body centered cubic (BCC), and body centered tetragonal (BCT) structure without any vacancies and defects are modeled. Using the variable coordination number made this model to be in good agreement with experimental and molecular dynamic (MD) results of different crystal structures. The model predicts melting entropy and enthalpy of...
On the temperature and residual stress field during grinding
, Article WCE 2010 - World Congress on Engineering 2010, 30 June 2010 through 2 July 2010 ; Volume 2 , 2010 , Pages 1196-1200 ; 9789881821072 (ISBN) ; Farrahi, G. H ; Ghadbeigi, H ; Sharif University of Technology
2010
Abstract
Grinding is widely used for manufacturing of components that require fine surface finish and good dimensional accuracy. In this study a thermo-mechanical finite element analysis is conducted to find out how grinding parameters can affect temperature and residual stress distribution in the workpiece. Results of parametric study presented in this work indicate, by carefully selecting the grinding parameters, minimum thermal and mechanical damage can be achieved. Higher workpiece velocities produce higher surface residual stress. By increasing depths of cut, depth of tensile residual stresses increases. Convection heat coefficient does not have any considerable effect on surface residual stress...
A new lattic LP-based post filter for adaptive noise cancellers in mobile and vehicular applications
, Article Proceedings of the 8th IEEE International Symposium on Signal Processing and Information Technology, ISSPIT 2008, 16 December 2008 through 19 December 2008, Sarajevo ; 2008 , Pages 407-412 ; 9781424435555 (ISBN) ; Sameti, H ; Veisi, H ; Abutalebi, H. R ; Sharif University of Technology
2008
Abstract
Adaptive Noise Cancellation (ANC) is a well-known technique for background noise reduction in automobile and vehicular environments. The noise fields in automobile and other vehicle interior obey the diffuse noise field model closely. On the other hand, the ANC does not provide sufficient noise reduction in the diffuse noise fields. In this paper, a new multistage post-filter is designed for ANC as a solution to diffuse noise conditions. The designed post-filter is a single channel Linear Prediction (LP) based speech enhancement system. The LP is performed by an adaptive lattice filter and attempts to extract speech components by using intermediate ANC signals. The post-filter has no...
Finite element analysis of shot-peening effect on fretting fatigue parameters
, Article Tribology International ; Volume 44, Issue 11 , 2011 , Pages 1583-1588 ; 0301679X (ISSN) ; Alvandi Tabrizi, Y ; Farrahi, G. H ; Majzoobi, G. H ; Ghadbeigi, H ; Sharif University of Technology
2011
Abstract
Shot peening is widely used to improve the fretting fatigue strength of critical surfaces. Fretting fatigue occurs in contacting parts that are subjected to fluctuating loads and sliding movements at the same time. This paper presents a sequential finite element simulation to investigate the shot peening effects on normal stress, shear stress, bulk stress and slip amplitude, which are considered to be the controlling parameters of fretting damage. The results demonstrated that among the modifications related to shot peening, compressive residual stress has a dominant effect on the fretting parameters
Mechanically activated synthesis of single crystalline MgO nanostructures
, Article Journal of Alloys and Compounds ; Volume 506, Issue 2 , September , 2010 , Pages 715-720 ; 09258388 (ISSN) ; Yoozbashizadeh, H ; Askari, M ; Kobatake, H ; Fukuyama, H ; Sharif University of Technology
2010
Abstract
One-dimensional (1D) MgO structures were successfully synthesized via carbothermic reduction of mechanically activated mixture of MgO and graphite. Mechanical activation of source materials before carbothermic reduction can substantially enhance the formation of MgO products at a temperature (1000 °C) relatively lower than that required in previous approaches (≥1200 °C). However, the morphology of MgO formed is dependent on the degree of mechanical activation and the condition of the subsequent carbothermic reduction. Two distinctive morphologies were found for MgO products synthesized using our method: single crystalline nanorods with rectangular cross-sections whose diameters range from 50...
Boundary control design for vibration suppression and attitude control of flexible satellites with multi-section appendages
, Article Acta Astronautica ; Volume 173 , 2020 , Pages 22-30 ; Salarieh, H ; Nejat Pishkenari, H ; Jalili, H ; Sharif University of Technology
Elsevier Ltd
2020
Abstract
Attitude and vibration control of a general form of flexible satellites is addressed in this paper. Partial differential dynamic equations are derived considering new details such as multi sectioned solar panels and elastic connections between main hub and solar panels. Boundary control approach is adopted to eliminate simplification errors of discrete models, using just one actuator in the hub. Asymptotic stability of attitude dynamics is proved for a group of boundary controllers and necessary conditions for asymptotic stability of vibrations are discussed. Being independent of modeling accuracy and using easily measurable feedbacks are among advantages of the proposed class of...
Characterization and calcination behavior of a low-grade manganese ore
, Article Materials Today Communications ; Volume 25 , 2020 ; Becker, H ; Eftekhari, H ; Yoozbashizadeh, H ; Safarian, J ; Sharif University of Technology
Elsevier Ltd
2020
Abstract
Characterization and calcination behavior of a low-grade manganese ore, as a part of Mn ferroalloys production, was studied by XRF, ex-situ XRD, in-situ XRD, and SEM-EDS techniques. Calcination experiments were carried out at and up to 900 °C (1173 K) in air and argon atmospheres. The samples were in particles and powder forms. The results indicated that both quartz and calcite phases in the ore exhibit a bimodal spatial distribution; as relatively large regions and finely distributed in the Mn- and Fe-containing phases. By Rietveld analysis of the in-situ XRD data, the reactions occurring upon heating during the calcination process were deduced. Thermal decomposition and reactive diffusion...
Minimizing the error of time difference of arrival method in mobile networks
, Article 2005 International Conference on Wirelessand Optical Communications Networks, Dubai, 6 March 2005 through 8 March 2005 ; 2005 , Pages 328-332 ; 0780390199 (ISBN); 9780780390195 (ISBN) ; Aghababa, H ; Radfar, M. H ; Khalaj, B. H ; Sharif University of Technology
2005
Abstract
Estimating the position of a mobile set is of great importance in new mobile services. However, in most cases, the accuracy should be less than 100 meters. This accuracy is hard to reach especially in urban areas. The main problem is that there are a lot of obstacles like buildings between the BTS and the mobile set. Thus the time measured between BTS and the mobile set is somehow greater than the time it takes the wave to travel directly between two points. This paper introduces an optimized solution for TDOA as one of the most efficient ways for finding the location of a mobile phone. Considering the standards and limitations of both GSM and UMTS, the Authors present a solution for...
A fast and novel method of pattern synthesis for non-uniform phased array antennas
, Article Proceedings International Radar Symposium, 24 June 2015 through 26 June 2015 ; Volume 2015-August , 2015 , Pages 924-929 ; 21555753 (ISSN) ; 9783954048533 (ISBN); 9783954048533 (ISBN); 9783954048533 (ISBN) ; Sebt, M. A ; Nayebi, M. M ; Behroozi, H ; Rohling, H ; Rohling, H ; Rohling, H ; Sharif University of Technology
IEEE Computer Society
2015
Abstract
Weighting elements to achieve radiation patterns with desired characteristics is a classical work in phased array antennas. These characteristics can be low sidelobe level, narrow beamwidth, high directivity, pattern nulling in special angle and etc. For each of these characteristics, different methods have been introduced. Most of methods have been presented for uniform arrays, however there are lots of methods to obtain a desired pattern for antennas with non-uniform element distances. The problem with these methods is complexity or not very good results. In this paper, fast and easy methods based on Least Square Error that leads to good results are presented. In addition, weighting of...
Size-dependent interaction of an edge dislocation with an elliptical nano-inhomogeneity incorporating interface effects
, Article International Journal of Solids and Structures ; Volume 49, Issue 5 , March , 2012 , Pages 759-770 ; 00207683 (ISSN) ; Ahmadzadeh Bakhshayesh, H ; Gutkin, M. Y
2012
Abstract
The elastic behavior of an edge dislocation, which is positioned outside of a nanoscale elliptical inhomogeneity, is studied within the interface elasticity approach incorporating the elastic moduli and surface tension of the interface. The complex potential function method is used. The dislocation stress field and the image force acting on the dislocation are found and analyzed in detail. The difference between the solutions obtained within the classical-elasticity and interface-elasticity approaches is discussed. It is shown that for the stress field, this difference can be significant in those points of the inhomogeneity-matrix interface, where the radius of curvature is smaller and which...
Control of parallel three- phase inverters using optimal control and SVPWM technique
, Article IEEE International Symposium on Industrial Electronics, 5 July 2009 through 8 July 2009 ; 2009 , Pages 1823-1828 ; 9781424443499 (ISBN) ; Mokhtari, H ; Sharif University of Technology
2009
Abstract
In this paper, optimal control strategy is applied to parallel three-phase inverters using SVPWM technique. The three-phase system is transformed to a synchronous-stationary frame, suitable cost functions are defined, and the switching schemes are determined for the inverters. The control strategy minimizes the circulating current between the inverters, therefore, proper load sharing scheme is achieved. Simulations are performed for steady state and load change operation, and the results which show the suitability of the controller are provided. ©2009 IEEE
Identification of an aspidospermine derivative from borage extract as an anti-amyloid compound: A possible link between protein aggregation and antimalarial drugs
, Article Phytochemistry ; Volume 140 , 2017 , Pages 134-140 ; 00319422 (ISSN) ; Ashrafian, H ; Sharif University of Technology
Elsevier Ltd
2017
Abstract
A number of human diseases, including Alzheimer's and Parkinson's have been linked to amyloid formation. To search for an anti-amyloidogenic product, alkaloid enriched extract from borage leaves was examined for anti-amyloidogenic activity using Hen Egg White Lysozyme (HEWL) as a model protein. After isolation of the plant extract using rHPLC, only one fraction indicated a significant bioactivity. TEM analysis confirmed a remarkable reduction of amyloid fibrils in the presence of the bioactive fraction. To identify the effective substance in the fraction, mass spectrometry, FTIR, and NMR were performed. Our analyses determined that the bioactive compound as...