Sharif Digital Repository

Tin sulfide with an energy gap of about 1.1 ev is a semiconductor suitable for applications such as solar cells, lithium-ion batteries, photocatalysts and other semiconductor-based devices. There are several methods for synthesizing this semiconductor at the nanometer scale, among which the solvothermal method is an efficient, controllable and inexpensive method. By precisely controlling the parameters of this process, two-dimensional tin sulfide nanosheets with high purity and desirable morphology can be produced. In this research, tin sulfide has been synthesized by solvothermal / hydrothermal chemical method and its metallurgical properties have been studied. Effect of solvothermal... 

Nowadays, heterogeneous photocatalytic processes have attained a particular importance among the other advanced oxidation processes in purification of organic polluted wastewaters. Titanium oxide is the most popular photocatalyst because of its strong oxidizing abilities for decomposition of organic pollutants, superhydrophilicity, chemical stability, long durability, non-toxic nature, and low cost. Same as other semiconductors, high recombination rate of charge carriers is the main weakness that cause decreases in photocatalytic efficiency. One of the solutions is coupling this material with other semiconductors. Core-shell nanoparticles are the type of these composites that show high... 

Application of wind energy and specially wind turbines as a green source of energy is getting more popular and as a result, the knowledge of wind energy has been improved dramatically. The purpose of this research is to determine the flow characteristics in the boundary layer profile over an airfoil which is used in a wind turbine blade. The model is sinusoidally oscillated in pitch. For the present study, the critical cross section of the wind turbine blade has been selected and the boundary layer velocity profiles over its airfoil have been investigated experimentally. Dynamic motion is produced with sinusoidal oscillator and the reduced frequency is varied in the range of 0.054 to 0.1.... 

This thesis studies a multi-product location-routing-inventory problem in which location-allocation, inventory and routing decisions are to be taken in a three-level supply chain including suppliers, depots and customers. Each product for each depot could be supplied by more than one supplier and each supplier has a limited supplying capacity per period. Products are distributed from depots to customers by a homogeneous fleet of vehicles. Backlogging is allowable for each customer on the condition of not exceeding a fraction of customer’s demand. A mixed-integer programming formulation is presented to describe the problem then a new hybrid heuristic algorithm based on the simulated annealing... 

Due to Reduction of fossil fuels resources and the pollution caused by using them, it seems inevitable to shift to using reproducible energies. Among different resource of reproducible energy, fuel cell is one of suitable technologies for investigation and development. Fuel cell is an electrochemical system to convert chemical energy of fuel directly to electrical energy. Each fuel cell has seven part (two Bipolar Plate, two electrode, two catalyst layer and polymeric Membrane). Oxidation occur in anode of fuel cell and created electron enters external circuit and then riches the cathode. The positive ion created in the anode reaches the cathode through the membrane (electrolyte) and... 

Features with sculptured or free-form surfaces appear frequently in computer-aided design of parts common to aerospace, automotive, and die and mold industries. Because of their ability to machine complex features and to achieve good surface finish, ball-end tools are widely used in the finish milling process of sculptured parts. This research has been devoted to the modeling of cutter-workpiece engagement (CWE) boundaries, cutting forces, and stability prediction in ball-end finish milling process of sculptured parts. In the first step, a new analytical model taking into account the effect of surface curvatures was presented for three-axis and five-axis ball-end milling processes. In this... 

Planning as one of the most important management tasks in all organizations is necessary and essential. Strategic planning is at the top of every organization’s decision-making, and it is important and crucial. Universities like other organizations cannot survive or thrive without a clear strategy. This study has done considering the importance of planning in universities and higher education institutions and discussing one of the challenges in this field. This challenge is analyzing the paradox of top-down planning and collective decision-making and the authority of faculty members in universities. It is an exploration research with the qualitative method and according to a case study of... 

Compared to block copolymer, random copolymer polypropylene (PPR) has lower toughness and impact resistance, and this defect creates limitations in the use of this polymer in some applications, including in the pipe industry. Creating a beta crystal structure in random polypropylene with the help of nucleating agent is a well-known method to solve this weakness. Following the previous activities in this group, the current research was defined based on the construction of beta nucleator based on calcium pimalat and its use in pipe-grade random polypropylene. Four methods were used to add germinating agent to polymer in this research. Synthesis of germinating agent and then adding it to the... 

Nowadays, in many of industrial processes, it’s necessary to measure acceleration of a moving object. Among the different type of accelerometers, the piezoelectric type are most useful and the most widely used. These sensors come in various configurations.
In the past, analytical and semi-empirical models have been used to design piezoelectric accelerometers. In these methods, based on some assumptions, the accelerometer nonlinear model is replaced with a linear model and the equivalent circuit model has been used to model accelerometer behavior. In these methods, the behavior of accelerometer become different from the expected one.
Recently, with the invention of efficient computing... 

In the preceding years, hydroxyapatite (HA)-based coatings and scaffolds have been known as the best biomaterials for dental and orthopedics applications. Biocompatible and bioactive hydroxyapatite-based Coatings on metallic implants is one of the best methods for reaching both suitable mechanical properties and appropriate bioactivity, leading to better osseointegration and osteoblast proliferation. The ultimate goal of this project is characterization as well as mechanical and electrochemical behavior investigation of Hydroxyapatite- Chitosan nanocomposite coating by electrophoretic deposition (EPD) method on Plasma Electrolyte Oxidation (PEO) treated titanium substrates and Magnesium (Mg)... 

In this study TiO2/SiO2 thin films were prepared by sol-gel method from Tetra isopropylortho Titanate(TIPT) as the principle of TiO2 material with Tera ethoxysilane(TEOS) as the principle of SiO2 material to achieve high scratch-resistant , antibacterial and self-cleaning surface area under the effect of various percentage of SiO2 . Film deposition was carried out using a dip-coating technique and heat-treatment was used at 700ºC to achieve crystalline of films with excellent adherence the of substrate.
The surface morphology of the films has been observed by Scanning Electron Microscope (SEM) and the tribological properties of the surface were investigated by Atomic Force Microscope... 

Nowadays, many entities and the relationships between them create different types of networks. Graphs are appropriate tools to model these networks. In a graph, nodes show individuals and edges show the relations between them. One of the most important research problems in the field of network analysis is community detection. In a network, a community is a group of nodes that has a lot of connections to the nodes inside the same group and a few to the ones which are outside. Community detection has many real world applications. Recommending items in recommender systems, detecting spy and terrorist groups and predicting future links between members in a social network are some examples where... 

Titanium anodes activated by noble metal oxides under the trade name of dimensionally stable anodes (DSAs) are widely used in the electrolytic industry, particularly in chlor – alkali electrolysis. Over 20 years of use, the fundamental aspects of their long – lasting performance are not fully understand and the corrosion mechanisms are still the subject of many investigations. RuO2 – TiO2 coatings on titanium substrate, due to proper electrochemical characteristics and good corrosion resistance, is most applicable as an anode in chlor – alkali systems. In the present investigation, the first layer of Pt – Ir coating is applied via electrodeposition method on the pretreated titanium substrate... 

Ni-SiC composite coatings are widely used in industry (equipment high wear resistance coatings, corrosion resistant coatings, ship and boiler coatings, . . . ). Its unique properties in high wear resistance, corrosion resistance and tribological properties, researchers tend to investigate this coating. This study covers Ni-SiC composite coating under pulsed current using a rotating disk electrode to achieve optimal conditions in synthsis process, increaseing hardness and resistance to corrosion in coatings.waats' bath established for electrodeposition in this research. Bath parameters, current parameters and hydrodynamic of solution is examined. Changing of current type from direct current... 

At the first stage, chitosan-hydroxyapatite-multiwalled carbon nanotube (CH-HA-MWCNT) composite coatings were synthesized by electrophoretic deposition technique (EPD) on Ti6Al4V and 316L stainless steel substrates at different levels of pH and characterized by X-ray diffraction (XRD), Raman spectroscopy, FTIR and field emission scanning electron microscopy (FESEM). A smooth distribution of HA and MWCNT particles in a chitosan matrix with strong interfacial bonding was obtained. At the second stage, effect of pH and MWCNT content of the suspension on corrosion behavior and mechanism of deposition were studied. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS)... 

Main aim of this work was to obtain the harder zinc coating and increasing the anti corrosive properties by mean of adding SiO2 particles by electrophoretic method.
The coating was applied on the substrate surface by mean of electro co-deposition technique in three different electrolytes ethanol, methanol and water. The morphology of the coating in each electrolyte studied by scanning electron microscope (SEM).For the Zn/SiO2 coatings achieved in ethanol solvent the polarization and EIS tests was took place and found that for the Zn/SiO2 coating contain less than 10% SiO2 the corrosion rate decreased but for the coatings contains more than 10% SiO2 the paradox occurred because of the... 

This thesis is concerned with the synthesis and characterization of high porous Ti based on thin films and the effect of polymer agents on their photocatalytic properties. Ti films can demonstrate different properties like self -cleaning and treatment of broad range of aqueous pollutants when it is exposed to light of wavelength less than 400 nm. This is due to photocatalytic reaction occurring on film surface which results in film superhydrophilicity and the active oxygen species production. This active sites and radicals will cause oxidize organic pollutants and microbe adherent to the material surface.
In this study Ti thin films have been prepared by the sol-gel method from... 

Composite coatings including self-lubricant particles such as graphite, MoS2, Al2O3 and SiC are extensively used to decrease the coefficient of friction of tribo-surfaces. Adding lubricant particles to an appropriate metallic matrix like copper, nickel, lead and their alloys is a suitable option in severe condition –for instance high temperature and low pressure- which liquid lubricants will be failed. Bronze can give various properties such as wear resistance, corrosion and oxidation protection, However cyanide solutions for electroplating process have environmentally limited for plating of Cu-Sn. In this research, a chloride electrolyte for bronze electroplating was developed and effect of... 

In this study, biocompatible ceramic coating, containing hydroxyapatite particles (HA), was successfully created by AC anodizing, on the surface of commercially pure titanium grades 2. Coating process basically consisted of three methods. In Method 1, samples were anodized in a salty electrolyte containing calcium – phosphate base and in method 2 samples were anodized as initial process, following cathodic polarisation deposition of HA particles. Finally in method 3, samples were anodized in an electrolyte containing of HA particles suspension.Parameters such as current density and time of anodizing process, in first procedure, and time of cathodic deposition process in second procedure, and... 

The synthesis and usage of nanoscaled TiO2 accompanied by the photocatalytic activity were experimented through a systematic research. The synthesis was based on the sol-gel method at low temperatures and atmospheric pressure. In recent years, many endeavors have been made so as to enhance the efficiency of TiO2 photocatalytic activity. The studies show that the inclusion of SiO2 into the TiO2 can give rise to the photocatalytic activity relevant to the derived composite Nanoparticles with regard to the pure TiO2. In this study, the production of TiO2-SiO2 Nanocomposite layers was proceeded via the sol method and the effect of SiO2 increasing and its amount in the primary solution on the...