Loading...
Search for: ghorbanian--mohammad-javad
0.209 seconds

    Experimental Study of Transition on an Airfoil in Pitching-Plunging Motion

    , Ph.D. Dissertation Sharif University of Technology Akhlaghi, Hassan (Author) ; Soltani, Mohammad Reza (Supervisor) ; Maghrebi, Mohammad Javad (Co-Supervisor) ; Ghorbanian, Kaveh (Co-Supervisor)
    Abstract
    Laminar-to-turbulent transition is very important concept in fluid dynamics due to its significant role on skin friction drag and heat transfer. It is more important in the fluid-based systems such as wind turbines. Employing computational fluid dynamics is still not efficient on prediction of flow transition, especially in complex problems such as oscillating airfoils. In one hand, flow transition models are not still suitable for general engineering flows such as oscillating airfoils. On other hand, due to the lack of experimental data, the existing flow solvers have not proven in the accurate simulation of the flow field simulation for complex problems such as oscillating airfoils. This... 

    Geometrical Modification of a Two-Stage Process Centrifugal Compressor to Improve the Performance Map

    , M.Sc. Thesis Sharif University of Technology Motamed, Mohammad Ali (Author) ; Ghorbanian, Kaveh (Supervisor)
    Abstract
    A Specific process centrifugal compressor is upgraded. The operating range and efficiency pattern are increased. A one-dimensional performance prognosis tool (CCPP) is developed. The tool uses mean streamline method as the analysis model. Since the working media has various components, a complete equation of state is utilized to model the thermodynamic behavior of the real gas in super critical pressures. The performance of the base-line compressor is deyermined. The performance prognosis tool is validated with available experimental data. Upgrade road map and methodology were introduced in accordance to domestic requirements. The performance of the upgraded compressor is investigated and... 

    An Axial Compressor Flow Analysis in Meridional Plane incorporating End-Wall Boundary Layer Effects

    , M.Sc. Thesis Sharif University of Technology Amini Magham, Mohammad Reza (Author) ; Ghorbanian, Kaveh (Supervisor)
    Abstract
    With everyday increasing application of gas turbine in different industries, fast and accurate tools for design, analysis and performance estimation of gas turbines have found many proponent; Compressors, as one of the most important parts of gas turbines, are no exception to this ordinance. Although development of Computational Fluid Dynamics (CFD) method was a great aid to improve the accuracy of this tools, complexity and being time consume make them uncommon and unpopular during preliminary design and analysis process. So it could be imply that simple analysis methods, such as 1D, 2D and quasi-3D, are not only not abandoned, but also very practical and most applied in preliminary design,... 

    design, Analysis and Motion Control of Microrobot Based on Cantilever Rotary Beams Due to Piezoelectric Actuation

    , M.Sc. Thesis Sharif University of Technology Ghorbanian Kerdabadi, Vahid (Author) ; Ahmadian, Mohammad Taghi (Supervisor)
    Abstract
    With regard to daily developments in micro and nanotechnology , the use of micro robots, In a different of applications increased extensively. The aim of this research was to introduce a mobile micro robot and analysis its behavior. this micro robot has several microlegs which are formed from microbeam mechanism and piezoelectric actuators. The degrees of freedom by taking any micro beam, any of these microlegs are able to move in a three-dimensional space. The mechanism used in this research for each of the microrobot legs, as was the consecutive series and its increase, in manor motor .In this research, unlike the previous tasks, piezoelectric actuators are considered as end effectors and... 

    Experimental Modeling of Influence of Exhaust Gas Recirculation on Flameless Combustion

    , M.Sc. Thesis Sharif University of Technology Hassani, Masoud (Author) ; Ghorbanian, Kaveh (Supervisor) ; Farshchi, Mohammad (Supervisor)
    Abstract
    The aim of this work is to design, build and test a laboratory scale flameless combustion chamber. Also, a theoretical model is developed to simulate flameless combustion with a simple model. Flameless combustion is a combustion type with transparent flame which consumes less fuel than typical premix and diffusion flames and emits very low level of NOx. In flameless combustion, recirculation ratio is higher than typical diffusion flames so the flow field is highly turbulent. High recirculation ratio causes low oxygen concentration in combustion zone; thus requiring inlet air to be preheated for flame stabilization at low equivalence ratio and oxygen concentration. We have designed a... 

    Investigation of Shock Wave Generation and Impacts in Methane Supersonic Separator

    , Ph.D. Dissertation Sharif University of Technology Amini Magham, Mohammad Reza (Author) ; Ghorbanian, Kaveh (Supervisor)
    Abstract
    In general, separation of gas mixtures is grouped in three different methods: adsorption and dissolve methods, membranes and filter methods, and cryogenic methods. One of the most novel and efficient techniques in the latter method, is the supersonic separation where all the expansion, liquefaction, and separation processes are performed within a converging-diverging nozzle with no complex or moving part. This research is focused on methane purification. A one-dimensional model is developed for design and performance analysis of supersonic separators incorporating real gas model, variable specific heat, condensation, and swirling flow. Further, an axisymmetric numerical simulation of the... 

    , M.Sc. Thesis Sharif University of Technology Abtahi, Mohammad Reza (Author) ; Abedini, Javad (Supervisor)
    Abstract
    In this piece of work, a gravity model is suggested as Iranian non-fuel export model to OIC countries. The most important results out of this model are the acquired coefficients of two variables, namely “ECO membership” and “Economic and Trade Freedom of Importer”. At first, we expected that for importer, being a member of ECO would increase the amount of trade with iran. Surprisingly, this is not what we see in a model. In fact, as ECO has not achieved any tangible success in increasing trade between its members, eastern Asian Muslim countries has become an important trade partner for iranians. This result is compatible with other pieces of researches about ECO. “Economic and Trade Freedom... 

    Relay-assisted Multiple-input Multiple-output Underwater Wireless Optical Communication Systems

    , M.Sc. Thesis Sharif University of Technology Jamali, Mohammad Vahid (Author) ; Salehi, Javad (Supervisor)
    Abstract
    Today’s growing interest to the underwater explorations and navigations demands to design appropriate underwater communication methods and systems. However, radio frequencies which are widely being used in free space communications, can’t be a good candidate for underwater wireless communications, due to their sever attenuation in water. On the other hand, underwater acoustic communication has been widely studied and implemented in the past decades, inspired by suitable propagation of acoustic waves through the underwater medium. Nevertheless, acoustic communication systems have limited bandwidth, lower propagation speed and lower security than optical counterparts, which suggests underwater... 

    Mobility-Aware Resource Allocation in Hybrid Visible Light Communication and 5G Radio Access Technologies Networks

    , M.Sc. Thesis Sharif University of Technology Dastgheib, Mohammad Amir (Author) ; Salehi, Javad (Supervisor)
    Abstract
    Visible light communication (VLC) uses huge license-free spectral bandwidth of visible light for high-speed wireless communication. Since each VLC access point covers a small area, handovers of mobile users are inevitable. In order to deal with these handovers, developing fast and effective resource allocation algorithms is a challenge. this paper introduces the problem of mobility-aware optimization of resources in hybrid VLC and 5G radio access technologies networks using the T-step look-ahead policy and employing the notion of handover efficiency. It is shown that the handover efficiency can correlate the overall performance of the network with future actions based on the mobility of... 

    Introducing a Numerical Method for Estimating Median Crack Depth during Machining on Optical Glasses

    , Ph.D. Dissertation Sharif University of Technology Asqari, Mohammad Amin (Author) ; Akbari, Javad (Supervisor)
    Abstract
    In present research, a cohesive based finite element model has been introduced to estimate median crack depth during mechanical machining on optical glasses. Development of the machining numerical model has been initiated by investigating the indentation process. Experimental results of this step have been calibrated primary numerical model which has been used in the scratch process. Due to differences between the scratch mechanism and indentation one, mathematical bases fracture formulas and cohesive relations have been developed. After extracting primary result, using them in the scratch model and developing the primary model, ultimately numerical model has been evolved to an abstract... 

    Production of Uranium Dioxide Nano Powder With Hydrothermal Method in Supercritical Water Reactor

    , M.Sc. Thesis Sharif University of Technology Golzary, Abooali (Author) ; Outokesh, Mohammad (Supervisor) ; Ahmadi, Javad (Supervisor) ; Karimi Sabet, Javad (Co-Advisor)
    Abstract
    Hydrothermal supercritical method is one of the most suitable methods for metal oxide nano powder, ceramics and mineral catalyst synthesis. Metal oxides nanopowder in its pure or mixed form has wide potential application as chemical industrial catalyst, hot Superconductors, magnetic material, gas sensors and car catalyst convertors. One of the most important metal oxides aspects of application is uranium oxide as nuclear reactor fuel is used. In addition, UO2 is selective catalyst for converting methane to methanol process and Decomposition of organic Chlorine material. In Supercritical hydrothermal method done in high pressure reactor with critical to fluid, is new method for the... 

    Lithium Isotopes Separation by Electrolysis Amalgam by a Continuous Method

    , M.Sc. Thesis Sharif University of Technology Kowsari, Mohammad Reza (Author) ; Outokesh, Mohammad (Supervisor) ; Ahmadi, Javad (Co-Advisor)
    Abstract
    Lithium has 9 isotopes which two isotopes are stable and remaining isotopes are unstable and have half-life. Lithium stable isotopes include 6Li and 7Li that their abundance is 7.53% and 92.47% respectively. Importance of lighter lithium isotope appears for its small cross section against thermal neutron and producing fusion reactors fuel in nuclear industries. Thermal neutron absorption cross section for 6Li and 7Li are 950 barn and 37 mbarn respectively. Interesting of these isotopes in nuclear industry is due to the large difference in the absorption cross section.6Li compounds implied for tritium producing in coat of nuclear fusion reactor with DT fuel. Following tritium is used in... 

    Experimental Study of Boundary Layer Transition on a Swept Wing

    , Ph.D. Dissertation Sharif University of Technology Masdari, Mehran (Author) ; Soltani, Mohammad Reza (Supervisor) ; Ghorbanian, Kaveh (Supervisor)
    Abstract
    Swept wings are of great interest for achieving high speed as well as increasing the critical Mach number in aircrafts and unmanned flying vehicles. The governing fluid mechanical phenomenon on swept wings is strongly influenced by the chordwise and spanwise components of the cross-flow. Laminar airfoils are employed for drag reduction and postponing the boundary layer transition from laminar to turbulence. Hence, the knowledge about the boundary layer structure and instability modes is of great significance. A series of wind tunnel tests are performed to examine the flow field over a swept wing at various conditions. The wing has a laminar flow airfoil section similar to NACA 6-series ones.... 

    Effect of Delta Wing Leading Edge Vortex on Pressure Distribution of Fuselagein in Subsonic Regime

    , M.Sc. Thesis Sharif University of Technology Sadri, Vahid (Author) ; Soltani, Mohammad Reza (Supervisor) ; Ghorbanian, Kaveh (Supervisor)
    Abstract
    The delta wing has proven to be very useful for the study and understanding of the basic features of separation-induced vortex flows since many aspects of these vortex flows can be generated with this simple shape. A phenomenon of special importance to vortical flows is vortex breakdown. Vortex breakdown remains an important and complicated phenomenon that can have negative or positive effects. The delta wing leading edge vortex is emphases in many experiments. Most of these experiments are focused on the delta wing only.In this research, emphasis is on vortex interaction of delta wing-canard-fuselage configuration. A series of low speed wind tunnel tests were carried out to investigate... 

    Experimental Aeroacoustic Investigation of Transient Impinging Jet Using Shock Tube

    , Ph.D. Dissertation Sharif University of Technology Bahman Jahromi, Iman (Author) ; Ebrahimi, Mohammad (Supervisor) ; Ghorbanian, Kaveh (Supervisor)
    Abstract
    Supersonic impinging jets, similar to the jet flows exhausted from a nozzle, generate high unsteady pressure and acoustic loads on the rocket payload or the VTOL aircraft structure with possible mission failure during the launch/starting phase. In the past, experimental studies were concentrated on characterizing the steady impingement flow and not the initial transient process. It was shown that one of the main characteristics of supersonic impinging jets is the dominance of the feedback loop mechanism. The present investigation is an attempt to examine the flow characteristics of a high temperature supersonic impinging jet through a convergent-divergent nozzle during the transient starting... 

    Design, Analysis and Manufacturing of Gas Foil Bearing

    , M.Sc. Thesis Sharif University of Technology Majidi, Mohammad Hassan (Author) ; Akbari, Javad (Supervisor) ; Movahhedy, Mohammad Reza (Supervisor)
    Abstract
    Foil gas bearings are compliant surface, self-acting hydrodynamic bearings that use ambient gas as their working fluid. They do not require external pressurization and are typically constructed from several layers of sheet metal foils. In high-speed, high-temperature applications the GFB’s have the advantage of developing higher load capacities than with fixed geometry gas bearings. Since GFB’s have a complex structure consisting of a spring-like substructure with an overlying flexible surface, there exists a great variety of permutations on any given design. At current work presents a 1D model for GFB with couple solving Reynolds and Euler-Bernoulli beam equation. This mean top foil assume to... 

    A Study on Automatic and Early Detection of Lameness in Dairy Cattle

    , M.Sc. Thesis Sharif University of Technology Honarvar Mahjoobin, Mohammad Hadi (Author) ; Akbari, Javad (Supervisor)
    Abstract
    Lameness in dairy cattle is a crucial welfare issue in dairy industry, and over the years scientists are attempting to present a detection method. In recent years it is attracting more attention to make the identification and discrimination of sounds and lames systematic and automatic. Right now, the most hopeful results have been obtained through the measurement of Ground Reaction Forces (GRF) of hooves, and analysis of load distribution between four legs, which seems applicable for wide use in dairy industry. However, the accuracy, validity, and reliability of discrimination is still far from an acceptable point, that is because of a great lack in understanding quantitative effects of the... 

    Boron Isotope Separation by Distillation of BF3-(C2H5)2O Complex

    , M.Sc. Thesis Sharif University of Technology montazeri, Meysam (Author) ; Otukesh, Mohammad (Supervisor) ; Ahmadi, Javad (Supervisor)
    Abstract
    Natural boron consists of two stable isotopes, mass 10 (19.3%) and mass 11 (80.7%). 10B isotope has a large thermal neutron capture cross-section and it therefore, used widely in such aspects as modern industry, military equipment, medical science and so on. specially the demand of atomic energy industry for the boron isotope is increased severely. So the separation of 10B from natural boron has received very wide attention at present. There are many kinds of methods on the boron isotopes separation, such as chemical exchange reaction and distillation in boron trifluoride method, ion exchange in boric acid solution method, counter current recycle membrane cascades in boron trifluoride... 

    The Synthesis and Characterization of Nano Zeolitic Molecular Sieve for Separation of 133Xe from 85Kr

    , Ph.D. Dissertation Sharif University of Technology Charkhi, Amir (Author) ; Kazemeini, Mohammad (Supervisor) ; Ahmadi, Javad (Supervisor)
    Abstract
    In this study the feasibility of xenon separation from xenon-krypton mixture was investigated by utilizing of the chromatographic column filled with nano and micron sized NaY zeolite. For this purpose the nano NaY with the yield of 100% related to Al2O3 and the average size of 98.6 nm was synthesized through the clear solution method with the mid-adding of NaOH. Furthermore, a novel method for granulation of nano zeolite was developed by utilizing sodium alginate as an external template. In this method the production of uniform spherical granules with the different sizes in the range of several milimiteres to 100 µm was easily performed. Moreover, the results showed that the adding of... 

    Separation of Boron Isotopes by Distillation of (CH3)2O-BF3 Complex

    , M.Sc. Thesis Sharif University of Technology abdollahi, Mojtaba (Author) ; Outokesh, Mohammad (Supervisor) ; Ahmadi, Javad (Supervisor)
    Abstract
    Natural boron includes two stable isotopes 10B and 11B with 19.3 and 80.7 weight percent respectivley.10B isotope has a high thermal neutron absorption cross section. So isotope 10B material is suitable for making atomic reactor control rods. Other and even more important applications of 10B are in disclosing neutrons in order to measure neutron reactors fluxes and also are in nuclear physics laboratories and medical radiation. This isotope also is used in the pharmaceutical and the military industries. There are several methods for separating boron isotopes. Among the distillation methods, thermal diffusion of BF3, distillation of BF3, distillation of methyl borate, boric acid distillation...