Sharif Digital Repository

Because of lower energy consumption and lower capital cost, divided wall columns attracted wide attention. The main challenge of these units is their controllability. In this thesis dynamic simulation and control of a divided wall column is investigated and an adaptive model predictive controller has been used for control purpose. For dynamic simulation the Aspen Dynamics software and for applying control strategy the MATLAB software have been utilized. The model used for model predictive controller has been obtained by using open loop responses of the system. The main advantage of presented work over the existing ones is using the input-output transfer function of the system model instead... 

This thesis aims to create an electronic health system for transferring, verifying, and monitoring patient data. Blockchain technology is used in this system. In this system, the patient can communicate with the relevant hospital via an authentication protocol and transmit his data to the hospital. The hospital levels the patient's data creates the patient's treatment prescription and shares it with the pharmacy and insurance company to facilitate the patient's effective treatment. Blockchain technology has been used in a variety of electronic health systems. There are several problems with these systems, including the incorrect use of blockchain, a lack of comprehensiveness, a lack of... 

In this research, multi-disciplinary design optimization (MDO) of a flying vehicle has been done based on the flight simulation. A meta-heuristic algorithm called Multi-objective Adaptive Real-coded Memetic Algorithm (MARCOMA) has been used for optimization. Since solving a MDO problem is a time consuming process, a RBF neural network has been used in the optimization algorithm as a surrogate model. The new algorithm, called MARCOMA+NN, has been tested with some standard benchmarks. MDO problem has six disciplines consists structure, aerodynamic, propulsion, guidance, control, and fire control. The MDO problem has 31 design variables and two objective functions. The objective functions are... 

Due to large range searches (there are various alignments between two points) as well as the complex and non-linear cost functions and a variety of geometric constraints, the problem of optimal railway alignment is known as a difficult problem. For this reason, choosing an alignment between two points is usually done based on a limited number of alignments put forward by experts. In recent years, the study of the railway alignment optimization raised again due to the importance of optimization and introduction of various algorithms and their progress in solving various problems. It is expected that applying metaheuristic optimization algorithms, such as methods based on Swarm intelligence... 

Peoples need financial resources to improve their quality of life, and companies need them to progress and increase their comparative advantage. Borrowing is one of the most popular methods of financing. Peer-to-peer lending, also known as "marketplace" or "social" lending, is a novel form of intermediation that expunges the role of financial institutions (like banks) as an intermediary and allows entities (individuals or businesses) to raise loans directly from other entities. This lending platform can provide better quality services to borrowers (by quickly providing a simple loan application process through a transparent and flexible portal) and lenders (by managing their funding and live... 

The purpose of this thesis is to improve the protocols for recording and transmitting medical data in terms of security and performance using blockchain technology. The approach we take in this Thesis differs in three respects from most articles written in this field. The first is that unlike those who look at the blockchain as a black box and take advantage of only its positive features, we consider the details and challenges it creates for us and solve them in order to use it. The second important point is to justify the use of blockchain in this design. It can be seen in many designs that the use of this technology is useless according to their model and goals. Finally, one of the most... 

Synthetic fiber rope mooring systems, are increasingly finding applications as offshore oil exploration goes to deeper sites. Synthetic fiber cables provide numerous advantages over steel mooring lines, particularly in deeper water that large self-weight of steel lines is prohibitive, synthetic fiber ropes could be a good selection for mooring system. In order to reduce the need for expensive tests under varying parameters and operating conditions it is essential to be able to model the mechanical behavior of very long synthetic mooring lines. The purpose of modeling mechanical behavior of cables is to determine global stiffness matrix Coefficients to correlate the forces and strains for... 

This project deals with the global buckling in high pressure/high temperature (HP/HT) subsea pipelines. Some subsea pipelines are laid directly on the seabed. Large axial forces will generally cause an exposed pipeline to buckle sideways, or laterally, on the seabed. Pipelines may significantly expand during start-up and shutdown cycles, resulting in global buckle formation with high out-of-straightness (OOS).This global buckling behavior may be unacceptable if it is not properly managed. Global buckling mitigation can be achieved by providing controlled lateral movements of pipeline. Buckle mitigation devices are installed along the pipeline to provide buckle initiation sites, there by... 

When a submarine pipeline is laid, pipeline spans may exist due to the unevenness of the seabed. Such pipeline spans when exposed to currents, may undergo vortex-induced vibration (VIV). As the flow velocity increases, the cross-flow oscillation begins to occur and vortex shedding frequency may approach the natural frequency of the pipe span. Amplified response due to resonance between the vortex shedding frequency of the free span may cause fatigue damage. Thus, the determination of the critical allowable span length under the various environments becomes the most challenging areas in the offshore industry. A substantial research effort related to various aspects of VIV and free span... 

This thesis addresses the main stages of ship vibration analysis and introduces applied strategies for vibration reduction of an existing ship. First, the basic theory of ship vibration is considered and the main sources of ship vibration are enumerated. Then, the manner and the steps of vibration measurement on ship structure are presented and a summary of vibration measurement guidelines is mentioned. Afterward, the procedure how to analyze the measured data of ship vibration is outlined and a comparison between the measured data and standard limits for vibration level considering structural vibration, machinery vibration and human comfort is done. Next, human response to vibration and the... 

Vibration control is one of the most critical aspects of designing space structures, as it can significantly impact the performance and operational lifespan of satellites. The launch phase is the most sensitive and critical stage in the satellite mission lifecycle, as intense vibrations are generated and transmitted to the satellite during this phase. To mitigate the severity of these transmitted vibrations, vibration isolators are employed. The objective of this study is to design and model a vibration isolator to control the vibrations transmitted from the launcher to the satellite during launch. To achieve this, an extensive investigation into vibration isolators used in the space... 

In  this  dissertation,  we  investigate  the  frequency  hopped  spread  spectrum  systems  which are extensively used in many communication systems. We derive the capacity region  of  Synchronous  Frequency  Hopped  Multiple  Access  (FHMA)  channels  (for  any  kind of noisy or nonselective fading environment) by using the side information which exists in the multi‐user detection. We assume that random hopping patterns are used by all the transmitters, and the common receiver knows the hopping patterns. We also compute  the  capacities  of  FHMA  with  and  without  power  control  for  AWGN  and  noiseless MFSK (in particular BFSK) modulated systems and compare the ... 

Regarding to the emergence of quantum computers and advances in the large scale implementation of them, exploiting hard problems of coding theory is of great importance.This family of problems, like those of lattices, has an acceptable resistance against classic and quantum attacks. Thus, they can be replaced with hard problems in number theory and algebra. Increasing dominance of cyberspace made us highly dependent to it. Consequently, preparing tools and methods to mitigate future threats is necessary. Digital signatures constitute an important family of cryptographic primitives. Code-based digital signatures are mostly suffering from two main drawbacks: large public key and long time of...