Sharif Digital Repository

Effect of NaF on crystallization kinetics, microstructure, and mechanical properties of mica glass ceramics were investigated by the differential thermal analysis (DTA), X-ray diffractometry (XRD), scanning electron microscopy (SEM), and microhardness tests. Non-isothermal DTA experiments showed that the crystallization activation energies of base glasses are changed in the range of 235-246 KJ/mol, while the crystallization activation energies of samples with addition of NaF are changed in the range of 263-367 KJ/mol. The increase of crystallization temperature is helpful for the increase of aspect ratio, and the microstructure of the glass ceramics becomes interconnected, which contributes... 

Non-isothermal differential thermal analysis (DTA), X-ray diffraction (XRD), and scanning electron microscopy (SEM) were used to study the nucleation and crystallization behavior of mica glass-ceramics with LiF as nucleating agent. The models enabled establishing the kinetic parameters for crystal growth of individual phases. The activation energies for crystal growth were found to be in the range of 161-301 KJ/mol, 416-424 KJ/mol, and 583-1011 KJ/mol for base glasses, samples with substitution of Li2O for K2O and samples with addition of LiF, respectively. Formation of transparent glass-ceramics from studied glass-samples has been investigated. Transparency is assumed to occur in the... 

Multi-walled carbon nanotubes (MWCNTs) with diameter of about 50 nm were synthesized using thermal chemical vapor deposition. We have investigated the influence of Mg doping to the MWCNTs on its hydrogen storage property. TEM micrographs showed that Mg was attached to the MWCNTs and discontinuous arrangement of the carbon walls was recognized in the MWCNTs. According to XPS and BET analyses, the surface functional groups and pore size of the Mg-MWCNTs are increased by interactions between the Mg and the MWCNT's outer walls. The electrochemical discharging curves of the MWCNTs and Mg-doped MWCNTs revealed that the hydrogen storage capacity was 363 and 450 mAhg -1, respectively. Volumetric... 

We report a study on hydrogen storage in Ca, Co, Fe, Ni, and Pd decorated multiwalled carbon nanotubes (MWCNTs) by using two techniques: volumetric and electrochemical. The results showed that hydrogen molecules are adsorbed on the defect sites and transported to the spaces between adjacent carbon via diffusion through both defect sites and opened tips into the layers. Hydrogen storage capacity can be improved in the decorated MWCNT by Co, Fe, Ni, and Ca metals in two approaches: (i) H2 adsorption via Kubas interaction and (ii) dissociation of H2 molecules on the metal particles. The results reveal that Pd are more effective catalyst for hydrogen storage process. It was found that... 

The effects of various ratios of Fe/Ni/MgO and growth temperatures on yield, diameter and quality of multi-walled carbon nanotubes (MWCNTs) were studied. Thermal gravimetric analysis (TGA) confirmed that the MWCNT yield depends on Fe/Ni ratio with the following order; Fe0.5 Ni0.5 > Fe > Fe0.75 Ni0.25 > Fe0.25 Ni0.75 > Ni. The results indicated that there is an optimum temperature (940 °C) for the MWCNT growth both from quality and quantity (yield) aspects as compared to other temperatures. Moreover, the changes on Fe/Ni to MgO ratio for the MWCNT growth revealed that Fe/Ni/MgO with the ratio of 17.5/17.5/65 had the highest quality and surface area as compared to the other ratios. The... 

Using multi-walled carbon nanotubes (MWCNTs), the present study focuses on their electrochemical hydrogen storage capacities. The results showed that the hydrogen desorption process is composed of two steps with voltages around -0.75 and -0.15 V. Hydrogen adsorption at -0.15 V took place at temperatures above 30 °C, and the amount of energy required for adsorbing hydrogen was 1.68 eV. The hydrogen storage capacity increased with increasing electrolyte temperature from 30 to 60 °C in both steps. The hydrogen storage capacity of the MWCNTs treated at different atmospheres showed that the decrease in the graphitization of MWCNTs led to the increase in hydrogen adsorption. The results also... 

The effects of HCl, HNO3, H2SO4 and HF acids on the purification and the electrochemical hydrogen storage of multi-walled carbon nanotubes (MWCNTs) were studied. The MWCNTs were synthesized on Fe-Ni catalyst by thermal chemical vapor deposition method. The X-ray diffraction and thermal gravimetric analysis results indicated that the MWCNTs purified by HF acid had the highest impurities as compared with the other acids. The N2 adsorption results at 77 K indicated that all the samples were mainly mesoporous and the purified MWCNTs by HF acid had the highest surface area as compared with the other acids. The hydrogen storage capacities of the purified MWCNTs by the following acids were in... 

Electrocatalytic oxidation of methanol on a nickel disc electrode coated with nickel dimethyglyoxime complex (NiDMG), conditioned by potential recycling in a potential range of 100-700 mV (versus SCE) is studied by cyclic voltammetry in alkaline medium (0.10 M NaOH). The results show that the NiODMG layer formed at the surface of electrode behaves as an efficient electrocatalyst for the oxidation of methanol in alkaline medium via Ni(III) species with the cross exchange reaction occurring through out the layer at a low concentration of methanol. A plausible mechanism was proposed for catalytic oxidation of methanol at this modified electrode. Moreover, the effects of various parameters such... 

The electrochemical corrosion behavior of finemet alloy at various heat treatment temperatures was investigated. Thermal behavior and structural changes were studied using differential scanning calorimetry and X-ray diffractometry, respectively. The electrochemical corrosion of amorphous and annealed samples was investigated in 0.10 M NaOH solution using electrochemical impedance spectroscopy and linear sweep voltammetery. Changes in morphology of the samples before and after corrosion were characterized using optical microscope. The results showed that structural relaxation and nanocrystallization during the heat treatment improved corrosion behavior of the alloy. The heat-treated alloy at... 

Hydrogen storage capacities of raw, oxidized, purified and Fe-doped multi-walled carbon nanotubes (MWCNTs) were studied by electrochemical method. Based on transmission electron microscopy and Raman spectroscopic data, thermal oxidation removed defective graphite shells at the outer walls of MWCNTs. The analysis results indicated that the acid treatment dissolved most of the catalysts and opened some tips of the MWCNTs. Thermal gravimetric analysis and differential scanning calorimetry results illustrated that by oxidation and purification of MWCNTs, the weight loss peak shifts toward a higher temperature. N2 adsorption isotherms of the purified and oxidized MWCNTs showed an increase in N2... 

Nickel-dimethylglyoxime complex (NiDMG) modified nickel electrode (Ni/NiDMG) showed a catalytic activity towards methanol oxidation in NaOH solution. The modified electrode prepared by the dimethylglyoxime anodic deposition on Ni electrode in the solution containing 0.20 mol L-1 NH4Cl + NH4OH (pH 9.50) and 1.0 × 10-4 mol L-1 dimethylglyoxime. The modified electrode conditioned by potential recycling in a potential range of 100-700 mV (vs. SCE) by cyclic voltammetry in alkaline medium (0.10 M NaOH). The results show that the NiODMG film on the electrode behaves as an efficient catalyst for the electrooxidation of methanol in alkaline medium via Ni(III) species formed on the electrode with the... 

Bacterial cellulose (BC) is an extracellular natural polymer produced by many microorganisms and its properties could be tailored via specific fabrication methods and culture conditions. There is a growing interest in BC derived materials due to the main features of BC such as porous fibrous structure, high crystallinity, impressive physico-mechanical properties, and high water content. However, pristine BC lacks some features, limiting its practical use in varied applications. Thus, fabrication of BC composites has been attempted to overcome these constraints. This review article overviews most recent advance in the development of BC composites and their potential in biomedicine including... 

The aim of this paper is the design and development of a novel user interface to interact with a meta system. Our focus is rather on interacting with Ambient Intelligence as a whole, which would for example enable users to influence the overall behaviors and attributes of dynamic device compositions. We call such interfaces Meta User Interfaces. The design details of a proposed user interface as well as a cognitive walkthrough evaluation are presented in this paper  

In this work, novel chitosan/bacterial cellulose (CS/BC) nanofibrous composites reinforced with graphene oxide (GO) nanosheets are introduced. As cell attachment and permeability of nanofibrous membranes highly depend on their fiber diameter, the working window for successful electrospinning to attain sound nanofibrous composites with a minimum fiber diameter was determined by using the response surface methodology. It is shown that the addition of GO nanosheets to CS/BC significantly reduces the average size of the polymeric fibers. Their mechanical properties are also influenced and can be tailored by the concentration of GO. Fourier transform infrared spectroscopy reveals hydrogen bonding... 

A series of reduced graphene oxide/ZnxCd1-xS (RGO/ZnxCd1-xS) nanocomposites (0 < x < 1) with different ratios of Zn/Cd were synthesized via a facile hydrothermal route under optimized experimental conditions and were carefully characterized by various techniques. Because very little is known about the morphology, specific surface area, and crystal phase effects of RGO/ZnxCd1-xS crystals on their photoresponsivity, field-emission scanning electron microscopy (FE-SEM), BET surface area analysis and X-ray diffraction (XRD) data were studied to investigate their effects on photoactivity. Based on the results, a crystal phase transition from a cubic phase in RGO/Zn0.9Cd0.1S to a hexagonal... 

Superhydrophobic surfaces demonstrate significant characteristics which make them suitable for a wide variety of applications. In this study, we propose a facile, one-step, and cost-effective anodizing scheme using aluminum nitrate/stearic acid mixture solution to create a superhydrophobic surface on an aluminum mesh. The surface outperforms the surface anodized by the widely used oxalic acid solution in terms of superhydrophobicity and water-surface friction behavior. The proposed surface reduced the friction by 11% on average respective to the surface prepared by oxalic acid. The durability of the introduced superhydrophobic surface has also been investigated. The proposed surface retained... 

This paper presents a dynamic programming methodology for finding the optimum preventive maintenance schedule of generating units of a GENCO in open power systems. The objective function for the GENCO is to sell electricity as much as possible, according to the market price forecast. Various constraints such as generation capacity, duration of maintenance and maintenance crew are taken into account. In a case study, introducing a GENCO with six generating units, and implementing dynamic programming, we obtain the optimal maintenance schedule over the planning period. © 2002 IEEE  

A dense membrane of La0.6Sr0.4Co0.8Fe0.2O3- δ (LSCF) perovskite was prepared by a new chelating agent, ethylene diamine N,N,N′,N′-tetra N-acetyl diamine (EDTNAD). As a potent ligand, EDTNAD provided a facile one-step method to form complexes of the four metal ions, simultaneously. The oxygen permeation flux through the pure perovskite LSCF dense membrane was measured over temperature range of 1073-1223 K, thickness of 0.7-1.0 mm and oxygen partial pressure of 0.1-1.0 bar. Oxidative coupling of methane (OCM) reaction using LSCF disk in the atmospheric membrane reactor and over the temperature range of 1073-1173 K showed a C2 selectivity of 100% and C2 yield of 5.01% at 1153 K. Furthermore,... 

Synchronization of fractional-order hyperchaotic complex systems is an interesting phenomenon since it has several applications in applied sciences. Based on the complexity of hyperchaotic dynamical systems and unpredictability of hidden attractors, which may exist in their phase spaces and could be beneficial in secure communications, a scheme to derive the analytical formula of the control functions is stated to study active control synchronization. Further comparison of this analytical formula with numerical experiments yields an interesting agreement. A novel fractional-order complex Sprott system is proposed to study this kind of synchronization and its dynamics. A secure communication... 

There is currently a significant focus on using boundary layer control (BLC) approach for controlling the flow around bodies, especially the foil sections. In marine engineering this is done with the hope of increasing the lift - to - drag ratio and efficiency of the hydrofoils. In this paper, effects of the method on hydrodynamic characteristics and tip vortex formation of a hydrofoil are studied. Steady water injection at the tip of the hydrofoil is simulated in different conditions by using ANSYS-CFX commercial software. Validity of the proposed simulations is verified by comparing the obtained results against available experimental data. Effects of the injection on the lift, drag, and...