Sharif Digital Repository

A stochastic real time optimization (SRTO) which has an efficient result has been implemented on the Tennessee Eastman (TE) challenging problem. In this article a novel stochastic optimization method, the so-called heuristic random optimization (HRO) proposed by Li & Rhinehart is used which attempts to rationally combine features of both deterministic and random (stochastic) methods. Further, an on-line nonlinear identifier via extended Kalman filter (EKF) is used to supply the plant model for model-based optimization algorithm. Using the information obtained from EKF an on-line HRO is accomplished by a random search method whose search directions and steps are considerably reduced by some... 

In this paper real-time optimization of the Tennessee Eastman challenge process is accomplished in a fuzzy environment. This study focuses on violation of TE constraints in fuzzy environment and also violation of some additional constraints originated from operating mode of the plant. Furthermore the objective function is treated in fuzzy form. Results show a great reduction of operating cost, which is selected as the objective function of this study. The theory of fuzzy optimization, which is the main contribution of this paper, is to reformulate the fuzzy constraints and fuzzy objective function into a crisp programming problem and to solve it by a conventional method of optimization. The... 

On-line optimization for the base case of the Tennessee Eastman (TE) challenge problem is presented; furthermore, an interesting operating condition near base case has been obtained, which results in a lower cost function. The proposed method is based on the estimation of the internal states and the time varying parameters of the process model based on an Extended Kalman filter. The sequential quadratic programming method has been used to accomplish the non-linear programming (NLP) task. The objective function is the operational cost while the constraints are the reactor mass balance, safe operation of the process equipment, and the conditions that satisfy the product quality and flow. The... 

Introduction: Due to the importance of laser light penetration and propagation in biological tissues, many researchers have proposed several numerical methods such as Monte Carlo, finite element and green function methods. Among them, the Monte Carlo method is an accurate method which can be applied for different tissues. However, because of its statistical nature, Monte Carlo simulation requires a large number of photon pockets to be traced, so it is computationally expensive and time-consuming. Although other numerical methods based on the diffusion method are fast, they have two important limitations: first, they are not valid near the bounder of sample and source, and second, their... 

A Real-Time Optimization (RTO) strategy incorporating the fuzzy sets theory is developed, where the problem constraints obtained from process considerations are treated in fuzzy environment. Furthermore, the objective function is penalized by a fuzzified form of the key process constraints. To enable using conventional optimization techniques, the resulting fuzzy optimization problem is then reformulated into a crisp programming problem. The crisp programming problem is solved using both Sequential Quadratic Programming (SQP) and Heuristic Random Optimization (HRO) techniques for comparison purposes. The proposed fuzzy RTO strategy is demonstrated via the Tennessee Eastman benchmark process,... 

Recent research revisits pairwise-correlating data prefetching due to its extremely low overhead. Pairwise-correlating data prefetching, however, cannot accurately detect where data streams end. As a result, pairwise-correlating data prefetchers either expose low accuracy or they lose timeliness when they are performing multi-degree prefetching. In this letter, we propose a novel technique to detect where data streams end and hence, control the multi-degree prefetching in the context of pairwise-correlated prefetchers. The key idea is to have a separate metadata table that operates one step ahead of the main metadata table. This way, the runahead metadata table harnesses the degree of... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the...