Sharif Digital Repository

In this research, electrically performance, vibration/resonance characteristics, low-velocity impact, and absorbed energy of the piezoelectric doubly curved panel on the viscoelastic substrate is carried out. For modeling the contact force between the structure and impactor, Hertz contact theory is presented. Hamilton's principle and first-order shear deformation theory (FSDT) are presented for obtaining the governing and boundary condition equations of the structure under the low-velocity impact. Galerkin and Newmark solution procedures are presented for solving the governing equation in displacement, and time domains, respectively. This study's novelty is considering the effect of... 

Sentiment analysis plays a key role in companies, especially stores, and increasing the accuracy in determining customers’ opinions about products assists to maintain their competitive conditions. We intend to analyze the users’ opinions on the website of the most immense online store in Iran; Digikala. However, the Persian language is unstructured which makes the pre-processing stage very difficult and it is the main problem of sentiment analysis in Persian. What exacerbates this problem is the lack of available libraries for Persian pre-processing, while most libraries focus on English. To tackle this, approximately 3 million reviews were gathered in Persian from the Digikala website using... 

This article is the first attempt to employ deep learning to estimate the frequency performance of the rotating multi-layer nanodisks. The optimum values of the parameters involved in the mechanism of the fully connected neural network are determined through the momentum-based optimizer. The strength of the method applied in this survey comes from the high accuracy besides lower epochs needed to train the multi-layered network. It should be mentioned that the current nanostructure is modeled as a nanodisk on the viscoelastic substrate. Due to rotation, the centrifugal and Coriolis effects are considered. Hamilton’s principle and generalized differential quadrature method (GDQM) are presented... 

This article is the first attempt to employ deep learning to estimate the frequency performance of the rotating multi-layer nanodisks. The optimum values of the parameters involved in the mechanism of the fully connected neural network are determined through the momentum-based optimizer. The strength of the method applied in this survey comes from the high accuracy besides lower epochs needed to train the multi-layered network. It should be mentioned that the current nanostructure is modeled as a nanodisk on the viscoelastic substrate. Due to rotation, the centrifugal and Coriolis effects are considered. Hamilton’s principle and generalized differential quadrature method (GDQM) are presented... 

The simple-shear condition is closer to reality than the direct-shear condition for simulating the mechanical behavior of vegetated soil slope under shallow failure. However, study on simple-shear characteristics for vegetated slope is still insufficient, and there lacks intuitive comparison of characteristics between these two shear conditions. In this study, large-scale simple-shear and direct-shear experiments were conducted on soil permeated by roots of Amorpha fruticosa to investigate the shear strength and stiffness. The stress-displacement relationship of each sample was obtained and further normalized to unify the influence of root content. The results reveal that the direct-shear... 

Although the role of individual ingredients of hot mix asphalt (HMA) such as asphalt binder and aggregates on its performance is readily recognized, there is only limited understanding about the interactions between these components and the properties of binder-aggregate interface. In order to study the interactions between asphalt binder and mineral aggregates, an interfacial test method was developed and its effectiveness was evaluated. Interfacial interactions were evaluated by testing thin films of an asphalt binder interfaced with the surface of aggregates under two different modes of loading in shear: sinusoidal oscillation and monotonically increasing. An Interaction Parameter (IP)... 

Sunflower oil was used as environmentally friendly source to develop novel self-catalyzed waterborne polyurethanes (WPUs) as efficient corrosion inhibitors for sour oilfield solution. A comprehensive experimental and computational analysis was performed to evaluate the inhibition effect of WPUs. The results of electrochemical measurements indicated that 200 µM of WPUs were effectively protected mild steel from sour corrosion by 95% and 94.6% at 25 °C and 60 °C, respectively. Furthermore, it was found that the best inhibition efficiency was provided by WPU when pyrrolidine was included in its structure, particularly at 60 °C. Additionally, a smoother steel surface was observed in the presence... 

The thickness of shallow landslides is generally less than 2 m, which is of the same order of magnitude as the growth range of vegetation roots. Vegetation roots can improve the stability of shallow soil through mechanical and hydraulic effects. Therefore, the landslide process is closely related to the plant roots growing on the slope surface. Plant roots play a dominant role in the regulation of soil suction through solar radiation induced transpiration. However, little is known about the correlation between cumulative solar radiation and soil suction. Moreover, the specific effects of fine roots on the suction distribution are not clear in most previous studies. In this study, a vegetated... 

This study aimed to investigate the effects of Bacillus amyloliquefaciens LFB112 on the growth performance, carcass traits, immune response, and serum biochemical parameters of broiler chickens. A total of 396 1 day old, mixed-sex commercial Ross 308 broilers with similar body weights were allotted into six treatment groups. The assigned groups were the CON group (basal diet with no supplement), AB (antibiotics) group (basal diet + 150 mg of aureomycin/kg), C+M group (basal diet + 5 × 108 CFU/kg B. amyloliquefaciens LFB112 powder with vegetative cells + metabolites), C group (basal diet + 5 × 108 CFU/kg B. amyloliquefaciens LFB112 vegetative cell powder with removed metabolites), M group... 

This study aimed to investigate the effects of Bacillus amyloliquefaciens LFB112 on the growth performance, carcass traits, immune response, and serum biochemical parameters of broiler chickens. A total of 396 1 day old, mixed-sex commercial Ross 308 broilers with similar body weights were allotted into six treatment groups. The assigned groups were the CON group (basal diet with no supplement), AB (antibiotics) group (basal diet + 150 mg of aureomycin/kg), C+M group (basal diet + 5 × 108 CFU/kg B. amyloliquefaciens LFB112 powder with vegetative cells + metabolites), C group (basal diet + 5 × 108 CFU/kg B. amyloliquefaciens LFB112 vegetative cell powder with removed metabolites), M group... 

This paper experimentally investigates the influence of hydrogen enrichment on the combustion and emission characteristics of a diesel HCCI engine using a modified Cooperative Fuel Research (CFR) engine. Three fuels, n-heptane and two middle distillates with cetane numbers of 46.6 and 36.6, are studied. The results show that hydrogen enrichment retards the combustion phasing and reduces the combustion duration of a diesel HCCI engine. Besides, hydrogen enrichment increases the power output and fuel conversion efficiency, and improves the combustion stability. However, hydrogen enrichment may narrow the operational compression ratio range and increase the knocking tendency. Both the overall... 

We propose a novel multi-parallel layer DCN architecture based on low radix FOS. Results show cost and power consumption reduction of 4 parallel-layer architecture is 60% and 26.7% with respect to the FatTree. © 2019 The Institute of Electronics, Information and Communication Engineers (IEICE)  

This paper reports on the NTIRE 2021 challenge on perceptual image quality assessment (IQA), held in conjunction with the New Trends in Image Restoration and Enhancement workshop (NTIRE) workshop at CVPR 2021. As a new type of image processing technology, perceptual image processing algorithms based on Generative Adversarial Networks (GAN) have produced images with more realistic textures. These output images have completely different characteristics from traditional distortions, thus pose a new challenge for IQA methods to evaluate their visual quality. In comparison with previous IQA challenges, the training and testing datasets in this challenge include the outputs of perceptual image... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas