Sharif Digital Repository

In this thesis, aerodynamic and aero thermodynamic effects associated with local heat addition into an inviscid steady state high speed flow are studied, numerically. This local heat, can be generated by a C.W laser, has a cylindrical shape and a Gaussian distribution in space. The loctation of the heat source, focal point of the laser, is considered to be upstream of the shock wave generated by a squared obstacle. The free stream Mach is 6 and the angle of attack is zero. Also, the center of this focal point is located on the symmetry line of the square. This kind of heat addition into high speed flow leads to wave drag reduction. Various parameters can affect this kind of flow control.... 

Congestion is an important issue in the network environment. To keep stable the perfor-mance of the network, congestion control algorithms have been extensively studied. Queue management method employed by the routers is one of the important issues in the congestion control study. Active Queue Management (AQM) has been proposed for early detection of congestion inside the network. AQM mechanisms control the queue length in a router by dropping arriving packets. The Random Early Detection (RED) is the most popular AQM mechanism used in routers on the Intenet to allow network users to simultaneously achieve high throughput and low average delay. The RED algorithm may cause heavy oscillation of... 

A Mobile Ad hoc NETwork (MANET) is a set of wireless mobile nodes that form a self configured network. MANETs do not have infrastructure and are not currently deployed on large scales. So research in this area is simulation based. Mobility model in a mobile ad hoc network explains the movement pattern of mobile users and is designed to describe the change of their location, velocity and acceleration over time. One of the challenges in this field is the definition of a common mobility model that provides an accurate and realistic movement description of mobile nodes. In this thesis we want to study the mobility pattern of vehicles on Kish Island and compare it with different kinds of... 

Estimation of runoff in the ungauged basins is a challenge for hydrologists. The main objective of this research is to produce runoff coefficient map using SCS-CN (1972) and Kennessey (1930) as empirical models to for Urmia Lake basin between for 2006-2011.Both SCS-CN and Kennessey methods use slope, land use, and soil permeability data to estimate surface runoff. Accuracy of each model is tested along with the observed runoff using the Root Mean Square Error (RMSE).Urmia Lake basin includes about 400,000 hectares irrigated land, which constitutes around 10 percent of the entire basin area. To exclude the anthropological activities from the estimations, methods were applied only for 28... 

Objective: Accurate quantification in PET imaging is essential for proper evaluation and requires attenuation and scatter correction. Typically, this correction is performed using CT; however, the propagation of CT image errors to PET, the additional radiation dose in PET/CT, especially in pediatric cases and repeated scans, as well as challenges associated with standalone PET and PET/MRI, highlight the need for alternative approaches. This study investigates the capability of deep learning in jointly correcting attenuation and scatter for PET images with different radiotracers. Methods: Various neural network models, including ResNet, U-Net, and swin UNETR, were trained for direct... 

Behran Mehr Peyma (BMP) is an elevator equipment producer and trader in Iran which was established in 2004. At first they are producing some regular parts of elevator and then during these years they are trying to improve their work and expand their business till they have the 15% market share in elevator market in Tehran.In this thesis I am trying to use the SWOT and PETS methods to show the exact situation of BMP comparing to the whole market considering the competitors.During this reduction in the market I suggest to BMP to change some policies and use some of its strength to attract some new customers, changing their brand name and find a relation to contribute in some tenders and... 

Medical needle interventions are a common technique for accessing tissue structures.In these procedures, needles are used, for example, to extract biopsy samples, brachytherapy, and to insert drugs. In TRUS guided prostate brachytherapy application, Physicians used ulterasound imaging to steer the needle and insert radioactive seeds into cancerous tumors to irradiate surrounding tissue over several months. Prostate rotation, deformation, and unavailability of imaging data during part of the insertion path result in misplaced seeds. To overcome these problems, in this research, we modeled the prostate, its membrane and the surrounding fatty tissue as linearly elastic homogenous material, and... 

This study has investigated the effects of different environmental conditions on the bond at the interface between two fiber reinforced polymer (FRP) layers. A total of 945 single lap splice coupons with three bond length were made using wet lay-up technic. There were used three unidirectional fabrics and one type of epoxy resin. A Uniaxial tensile test was performed on samples after 2, 4, 12, 20, 28, 36 and 48 weeks of exposure. Also series of test were conducted in order to determine the minimum lap splice length of single splice FRP samples. The experimental results indicated reduction of bond strength in glass specimens that was 17 % after 48 weeks of exposure while for same amount of... 

Deep learning, as a subdivision of machine learning, attempts to model high-level concepts by using a deep graph, consisting of several layers of linear and nonlinear transformations. Implementing these algorithms on hardware is a big challenge.¬This project offers a system in which various hardware methodologies can be used to implement deep learning algorithms side by side. The overall structure of the system consists of high-level programming interfaces for implementation and expression of machine learning algorithms by the user, which will be available as libraries in a high-level programming language such as Python, Ruby, and Julia. These interfaces allow the user to evaluate their... 

Trip distribution is the second step of the four-step travel demand modeling. Like other travel demand models, the most important objective of trip distribution models generation is forecasting the travel data of a year in the future. On the one hand, extensive changes in cities’ urban structures and people’s travel behavior during the years brings up the essential question of how temporally stable and transferable trip distribution models are? This question becomes even more important when the more complex structure of trip distribution models compared to models such as trip generation is considered. On the other hand, it is logical to assume that the consideration of the effects of urban... 

Articular cartilage has limited repair capability following traumatic injuries and current methods of treatment remain inefficient. Reconstructing cartilage provides a new way for cartilage repair and natural polymers are often used as scaffold because of their biocompatibility and biofunctionality. The goal of cartilage tissue engineering is to design a scaffold with proper pore structure and similar mechanical properties to the native tissue. In this study Porous scaffolds prepared from silk fibroin, chitosan and gelatin blends with varying ratio of silk fibroin and gelatin by freeze drying method were characterized for physicochemical, mechanical and biological properties. Among the... 

According to studies, low back pain is one of the most common and costly musculoskeletal disorders. Herniation of intervertebral discs exerts pressure on the nerves, causing pain. To alleviate this, physicians perform a procedure called nucleotomy, which removes the disc's nucleus pulposus to reduce pressure, retract the disc, and relieve pain. Accurate estimation of spinal forces during activities is essential for injury prevention, activity correction, and improved surgical techniques. Although laboratory studies on humans or cadavers are valid, they are often invasive and limited to simple scenarios, necessitating precise computational models for comprehensive biomechanical analysis.... 

Resources management is essential duo to sustainable development and marine resources limitations. There are several ways to restore coastal damaged ecosystems, one of the best and most cost effective solution is establishment of artificial reefs. A popular type of artificial reef is named Reef ball, a hollow hemisphere. In some regions these habitats has also been used as submerged breakwater. These structures recover and protect endangered species ecosystem although they provide aesthetic view to a beach. Main application of these structures is to provide a safe environment for marine creature. In this study initially Transmission coefficient variation in two-dimensional model experiments...