Sharif Digital Repository

World Wide Web is a huge information space, making it a valuable resource for decision making. However, it should be effectively managed for such a purpose. One important management technique is clustering the web data. In this paper, we propose some developments in clustering methods to achieve higher qualities. At first we study a new density based method adapted for hierarchical clustering of web documents. Then utilizing the hyperlink structure of web, we propose a new method that incorporates density concepts with web graph. These algorithms have the preference of low complexity and as experimental results reveal, the resultant clusters have high quality. © 2009 Elsevier B.V. All rights... 

The rapid increase of information on the web makes it necessary to improve information management techniques. One of the most important techniques is clustering web data. In this paper, we propose a new 3-phase clustering method that finds dense units in a data set using density-based algorithms. The distances in the dense units are stored in order in structures such as a min heap. In the extraction stage, these distances are extracted one by one, and their effects on the clustering process are examined. Finally, in the combination stage, clustering is completed using improved versions of well-known single and average linkage methods. All steps of the methods are performed in O(n log n) time... 

So far several methods have been proposed for clustering the web. On the other hand, many algorithms have been developed for clustering the relational data, but their usage for the Web is to be investigated. One main category of such algorithms is density based methods providing high quality results. In this paper first, a new density based algorithm is introduced and then it is compared with other algorithms of this category. The proposed algorithm has some interesting properties and capabilities such as hierarchical clustering and sampling, making it suitable for clustering the web data. © Springer-Verlag Berlin Heidelberg 2007  

Clustering Web data is one important technique for extracting knowledge from the Web. In this paper, a novel method is presented to facilitate the clustering. The method determines the appropriate number of clusters and provides suitable representatives for each cluster by inference from a Bayesian network. Furthermore, by means of the Bayesian network, the contents of the Web pages are converted into vectors of lower dimensions. The method is also extended for hierarchical clustering, and a useful heuristic is developed to select a good hierarchy. The experimental results show that the clusters produced benefit from high quality  

Clustering is one of the most important approaches for mining and extracting knowledge from the web. In this paper a method for clustering the web data is presented which using a Bayesian network, finds appropriate representatives for each of the clusters. Having those representatives, we can create more accurate clusters. Also the contents of the web pages are converted into vectors which firstly, the number of dimensions is reduced, and secondly the orthogonality problem is solved. Experimental results show about the high quality of the resultant clusters. © Springer-Verlag Berlin Heidelberg 2007  

Clustering the web documents is one of the most important approaches for mining and extracting knowledge from the web. Recently, one of the most attractive trends in clustering the high dimensional web pages has been tilt toward the learning and optimization approaches. In this paper, we propose novel hybrid harmony search (HS) based algorithms for clustering the web documents that finds a globally optimal partition of them into a specified number of clusters. By modeling clustering as an optimization problem, first, we propose a pure harmony search-based clustering algorithm that finds near global optimal clusters within a reasonable time. Then, we hybridize K-means and harmony clustering... 

Recently, tree structures have become a popular way for storing and manipulating huge amount of data. Classification of these data can facilitate storage, retrieval, indexing, query answering and different processing operations. In this paper, we present C-Classifier and M-Classifier algorithms for rule based classification of tree structured data. These algorithms are based on extracting especial tree patterns from training dataset. These tree patterns, i.e. closed tree patterns and maximal tree patterns are capable of extracting characteristics of training trees completely and non-redundantly. Our experiments show that M-Classifier significantly reduces running time and complexity. As... 

Introduction: This report describes the synthesis of 2-Amino-2-deoxy(S- benzoylthioacetyl)-D-glucose (S-Bz-TA-DG), radiolabeled with [ 99mTc(CO)3(OH2)3]+ complex with a procedure including deprotection of the benzoyl group, characterization by HPLC using a C18 reverse phase column and preliminary biodistribution study in normal mice. Methods: [99mTc(CO) 3(H2O)3]+ complex was used to label TA-DG with 99mTc. This complex was prepared using up to 46 mCi of Na99mTcO4 in 1mL saline. The radiochemical purity (>95%) was determined by TLC in normal saline solution as the mobile phase. Radio-HPLC analysis of [99mTc]-(TA-DG) at pH=9.5-10, revealed that labeling with 99mTc resulted in the formation of... 

Using multiple antennas at the transmit and receive sides of a passive radar brings both the benefits of MIMO radar and passive radar. However one of the obstacles arisen in such configuration is the receive antennas placement in proper positions so that the radar performance is improved. Here we just consider the case of positioning one receiver among multiple illuminators of opportunity. Indeed it is a start for the solution of optimizing the geometry of the multiple receivers in a passive radar  

SbCl3 supported on montmorillonite K-10 is an efficient catalyst for the ring opening of epoxides with aromatic amines under solvent-free conditions and microwave irradiation to give the corresponding b-amino alcohols in high yields with high regioselectivity  

In this paper, we consider an integrated sensing and communication (ISAC) system with wireless power transfer (WPT) where an unmanned aerial vehicle (UAV)-based radar serves a group of energy-limited communication users in addition to its sensing functionality. In this architecture, the radar senses the environment in phase 1 (namely sensing phase) and mean-while, the communications users (nodes) harvest and store the energy from the radar transmit signal. The stored energy is then used for information transmission from the nodes to UAV in phase 2, i.e., uplink phase. Performance of the radar system depends on the transmit signal as well as the receive filter; the energy of the transmit... 

One of the important obstacles in MIMO (Multiple Input Multiple Output) radars is the issue of designing proper transmit signals. Indeed, the capability of signal design is a significant advantage in MIMO radars, through which, the system can achieve much better performance. Many different aspects of this performance improvement have been considered yet, and the transmit signals have been designed to attain such goal, e.g., getting higher SNR or better detector's performance at the receiver. However, an important tool for evaluating the radar's performance is its ambiguity function. In this paper, we consider the problem of transmit signal design, in order to optimize the ambiguity function... 

Two gains play key roles in recently developed MIMO wireless communication systems: "spatial diversity" gain and "spatial multiplexing" gain. The diversity gain refers to the capability to decrease the error rate of the MIMO channel, while the multiplexing gain implicitly refers to the amount of increase in the capacity of the MIMO channel. It has been shown that there is a fundamental tradeoff between these two types of gains, meaning interplay between increasing reliability (via an increase in the diversity gain) and increasing data rate (via an increase in the multiplexing gain). On the other hand, recently, MIMO radars have attracted much attention for their superior ability to enhance... 

It is a well known fact that using multiple antennas at transmit and receive sides improves the detection performance. However, in such multiple-input multiple-output (MIMO) configuration, proper positioning of transmitters and receivers is a big challenge that can have significant influence on the performance of the overall system. In addition, determining the power of each transmitter under a total power constraint is a problem that should be solved in order to enhance the performance and coverage of such a system. In this paper, we design the Neyman-Pearson detector under the Rayleigh scatter model and use it to introduce a criterion for the antenna placement at both transmit and receive... 

There has been much interest, recently, towards exploiting the Multiple-Input Multiple-Output (MIMO) technique in radar. It is shown that using multiple antennas at transmit and receive sides can improve the performance of the system. However, in order to analyze the system's performance, its ambiguity function, i.e. the ambiguity function of a MIMO radar, is needed to be defined. In this paper, beginning from the information theoretic definitions, we derive such function, specifically for a MIMO radar with widely separated antennas  

By combining the two ideas of MIMO (Multiple Input Multiple Output) and PCL (Passive Coherent Location) in radar, one can achieve the advantages of both recently developed techniques simultaneously. While using multiple antennas at the receive side provides a spatial diversity of the object to be detected, using multiple illuminators of opportunity, most importantly, makes the radar covert to the interceptors. One obstacle in such MIMO configuration is choosing the positions of the receive antennas. In this paper, after analyzing the Neyman-Pearson detector for the DVB-T based PCL, we introduce the probability of missed detection as a criterion to place the receive antenna. Here, we only... 

One of the most important obstacles in passive radar applications is removing the direct signal from the target channel. Otherwise, week echoes from the targets in the target channel would be ignored due to the limited dynamic range of the system. One of the most effective techniques in this field is using adaptive filters. In this paper various adaptive filters are introduced and their performances are shown and compared  

It has been shown that using multiple antennas in a radar system improves the performance considerably, since multiple target echoes are received from different aspect angles of the target. In this way, the target detection is improved. However, when using multiple antennas, some problems, such as designing the transmit signals, synchronization, etc. emerge that should be solved. One of such problems is the receiver placement. Receiver placement deals with choosing a proper position for the receive antenna in order to optimize the whole system's performance. In this paper, a receiver placement procedure based on improving the radar ambiguity function is proposed for the case of a multisite... 

By employing the MIMO (multiple-input-multiple-output) technology in radar, some new problems emerged, that, in order to benefit the MIMO gains in radar, it was necessary to solve them suitably. One of such obstacles is determining the positions of receive antennas in a MIMO radar system with widely separated antennas (WS MIMO radar), since it is shown that the antennas' positions affect the whole system's performance considerably. In this study, a proper receivers' positioning procedure is proposed. To do this end, four criteria are developed based on the proposed MIMO detector and the MIMO ambiguity function. The simulations verify that the proposed positioning procedure improves the...