Sharif Digital Repository

Biodiesel is an attractive renewable energy in Iran. However, the concerns for food security, emissions, and water requirement move us towards developing the analytical framework to study emission-water nexus of biodiesel via the multi objective sustainable planning of biodiesel supply chain. Here, the literature of biodiesel in Iran is comprehensively reviewed and main issues are discussed. Then, a supply chain planning model is applied to depict the optimal path ways to minimize costs, net emission, and water use in Iran during 25 years. The microalgae via open ponds and jatropha cultivation reduce the total costs and improve negative emissions. The jatropha optimizes the water use and... 

Biofuels are important alternative fuel in recent years. In this work, the bioethanol supply chain planning is performed by BioEnergy Supply Model to optimally find the best pathways using economic and environmental objective functions in Iran. Then, different sustainability criteria focusing on environmental, economic, and social concerns are assessed for possible routes of the bioethanol production from available resources. Although agriculture residues and wastes, decrease the greenhouse gas emissions but municipal solid wastes are more economic and require less water. The agricultural wastes and residues improve the sustainability. Then, criteria focusing on environmental, economic, and... 

Biofuels are important alternative fuel in recent years. In this work, the bioethanol supply chain planning is performed by BioEnergy Supply Model to optimally find the best pathways using economic and environmental objective functions in Iran. Then, different sustainability criteria focusing on environmental, economic, and social concerns are assessed for possible routes of the bioethanol production from available resources. Although agriculture residues and wastes, decrease the greenhouse gas emissions but municipal solid wastes are more economic and require less water. The agricultural wastes and residues improve the sustainability. Then, criteria focusing on environmental, economic, and... 

In this study, H4Ti5O12 nanotubes have been prepared as Li+ adsorbent by acid treatment of Li4Ti5O12 nanotubes. Li4Ti5O12 nanotubes were synthesized via a hydrothermal method in which TiO2(B) nanNotubes were used as a precursor. The prepared Li-ion sieve showed a significant high ion-exchange capacity (160.6 mgg-1) for lithium ions due to its large specific surface area of 115.4 m2 g-1 compared to the other related studies. The kinetics and isotherm investigation revealed that the pseudo-second-order equation well described the adsorption kinetics, and the Langmuir model well fitted the isotherm data. Furthermore, the low value of adsorption energy obtained from the Dubinin-Radushkevitch... 

In this study, H4Ti5O12 nanotubes have been prepared as Li+ adsorbent by acid treatment of Li4Ti5O12 nanotubes. Li4Ti5O12 nanotubes were synthesized via a hydrothermal method in which TiO2(B) nanNotubes were used as a precursor. The prepared Li-ion sieve showed a significant high ion-exchange capacity (160.6 mgg−1) for lithium ions due to its large specific surface area of 115.4 m2 g-1 compared to the other related studies. The kinetics and isotherm investigation revealed that the pseudo-second-order equation well described the adsorption kinetics, and the Langmuir model well fitted the isotherm data. Furthermore, the low value of adsorption energy obtained from the Dubinin-Radushkevitch... 

Network reliability measures the probability that a target node is reachable from a source node in an uncertain graph, i.e., a graph where every edge is associated with a probability of existence. In this paper, we investigate the novel and fundamental problem of adding a small number of edges in the uncertain network for maximizing the reliability between a given pair of nodes. We study the mathbf {NP}NP-hardness and the approximation hardness of our problem, and design effective, scalable solutions. Furthermore, we consider extended versions of our problem (e.g., multiple source and target nodes can be provided as input) to support and demonstrate a wider family of queries and... 

Here, Graphene oxide/poly (acrylamide -2-acrylamide-methyl-propanesulfonic acid)/sodium alginate (GO/PA-AMPS/SA) hydrogel was synthesized through a free-radical polymerization approach. The impact of Graphene Oxide (GO) content on mechanical strength, swelling behavior, and the adsorption performance of prepared hydrogel was studied. The operating parameters, including contact time, solution pH, and initial Cu(II) content on the adsorption capacity of the hydrogel, were studied. The maximum Cu(II) adsorption capacity of 230.8 mg/g was obtained for GO/PA-AMPS/SA under a pH of 5, the contact time of 270 min, and adsorbent content of 0.5 g/L at 25 °C. The high value of adsorption capacity after... 

Laccase production by indigenous fungus, Phanerochaete chrysosporium, requires solving optimal problems to determine the maximum production of the enzyme within a definite time period and conditions specified in the solid-state fermentation process. For this purpose, parallel to response surface methodology, an analytical approach has been proposed based on the advanced concepts of Poisson geometry and Lie groups, which lead to a system of the Hamiltonian equations. Despite the dating of the Hamiltonian approach to solving biological problems, the novelty of this paper is based on the expression of a Hamiltonian system in notions of Poisson geometry, Lie algebras and symmetry groups and... 

The aim of this study is to quantify the water-energy-emissions nexus in wastewater treatment plants (WWTPs). At first, energy auditing is done for two real WWTPs to find out the energy consumption of different plant stages and the energy-saving potentials. The power plant and carbon capture units are taken into account to assess the energy-emission nexus based on emergy flows. Then, the emergy analysis is applied to evaluate the environmental, economic and technical aspects. An emergy performance index (EmIGHG) is presented by the means of emergy flow diagram of the WWTP beside a power plant (considering the electricity production emergy cost) and carbon capture unit (considering the CO2... 

A thermo-elastic analysis coupled with a phase change model is employed to evaluate thermal stresses as well as progress of austenite decomposition after hot strip rolling operations. The thermo-mechanical finite element analysis is utilized to assess the distributions of temperature and thermal stresses during cooling while at the same time, a model based on the additivity rule is used to determine the rate of austenite to ferrite decomposition. The proposed model is applicable to multi-pass rolling schedules while the effects of different process parameters including the rolling speed and cooling configuration of the run-out table can be taken into account. In order to verify the... 

Chlorobenzoic acids (CBAs) are recalcitrant and toxic materials which enter the environment directly using pesticides and herbicides, or indirectly through the biodegradation of polychlorinated biphenyl (PCB) compounds. In the conducted study, biodegradation of 4-chlrobenzoic acid was investigated by Lysinibacillus macrolides DSM54T, which had previously been isolated from PCB-polluted soils. Environmental factors including pH, temperature, 4-CBA concentration and inoculation percentage were optimized using response surface methodology (RSM). 58 experiments were designed according to Historical Data, because of the arbitrary selection of experiments, and the combined effects of the... 

The effect of the hybrid suspension on the intrinsic characteristics of microencapsulated phase change material (MEPCM) slurry used as a coolant in counterflow microchannel heat exchanger (CFMCHE) with different velocities is investigated numerically. The working fluid used in this paper is a hybrid suspension consisting of nanoparticles and MEPCM particles, in which the particles are suspended in pure water as a base fluid. Two types of hybrid suspension are used (Al2O3 +MEPCM and Cu + MEPCM), and the hydrodynamic and thermal characteristics of these suspensions flowing in a CFMCHE are numerically investigated. The results indicated that using hybrid suspension with high flow velocities...