Loading...
Search for: haji-gholami--iman
0.136 seconds

    Steganalysis of Audio Signals Based on Discriminative Features Statistics

    , M.Sc. Thesis Sharif University of Technology Haji Shir Mohammadi, Mahmood (Author) ; Gholampour, Iman (Supervisor) ; Ghaemmaghami, Shahrokh (Supervisor)
    Abstract
    Digital Steganography is the embedding of digital data into a video, image or audio signal. The embedding must be done such that the perceptual quality of the host signal does not seriously degrade. In the last decade, Steganography has received considerable attention in various application fields. Steganography is not always a legal process and may be used to establish illegal communications, transfer malware files to certain targets, or collect data illicitly from an organization. Steganalysis methods are developed to detect Steganography in such applications.
    The purpose of this thesis is to develop a new steganalysis method based on perceptual models and statistical structure of the... 

    Numerical Simulation of Mass Transport in Cardiovascular System

    , M.Sc. Thesis Sharif University of Technology Haji Gholami, Iman (Author) ; Firoozabadi , Bahar (Supervisor) ; Saidi, Mohammad Said (Supervisor)
    Abstract
    In this dissertation, mass transport in cardiovascular system has been simulated using one-dimensional approach. As one-dimensional simulation has computation cost less than that of the three-dimensional simulations, and as it is more precise than lumped models, they are extensively used in the study of the phenomena in cardiovascular system. In addition, such an approach is more useful in the extraction of medical indices. In this study, a one-dimensional geometry of the systemic arteries has been used to solve momentum and continuity equations using characteristics method.
    At first, the physiological data of the systemic arteries have been used to simulate a one-dimensional geometry... 

    Optimal Batch Production for a Single Machine System with Rework

    , M.Sc. Thesis Sharif University of Technology Haji, Babak (Author) ; Haji, Ali Reza (Supervisor)
    Abstract
    This research attempts to develop the optimal solution for an inventory problem consisting of a single machine which produces items some of which may be defective. We assume that no shortages are allowed and all defective items are to be reworked. Setup cost for rework and waiting time of defectives are considered. This research consists of two different parts. In the first part we consider two different policies where in the first policy in each cycle after the regular production the machine is setup for the rework of defectives of the same cycle. In the second policy several cycles constitute a period. All the defectives produced in the period are reworked in the last cycle of that period.... 

    Optimal batch production with rework and non-zero setup cost for rework

    , Article 2009 International Conference on Computers and Industrial Engineering, 6 July 2009 through 9 July 2009 ; 2009 , Pages 857-862 ; 9781424441365 (ISBN) Haji, B ; Haji, R ; Haji, A ; Sharif University of Technology
    2009
    Abstract
    This paper attempts to develop the optimal solution for an inventoryproblem consisting of a single machine which produces items some of which may bedefective. We assume that no shortages are allowed and all defective items areto be reworked. Setup cost for rework and waiting time of defectives areconsidered. We consider two different policies where in the first policy in eachcycle after the regular production the machine is setup for the rework ofdefectives of the same cycle. In the second policy several cycles constitute aperiod. All the defectives produced in the period are reworked in the last cycleof that period. At the end of the rework cycle the whole process starts allover again. One... 

    One-for-one period policy in a two-echelon inventory system with commoncycle and poisson demand rate for retailers

    , Article 2009 International Conference on Computers and Industrial Engineering, CIE 2009 ; 2009 , Pages 831-834 ; 9781424441365 (ISBN) Haji, R ; Tayebi, H ; Haji, B ; Sharif University of Technology
    2009
    Abstract
    This paper deals with a two-echelon inventory system consisting of onesupplier and N retailers. Each retailer faces an independent Poisson demand withthe same rate and applies a new ordering policy called one-for-one- periodordering policy for its inventory control. In this ordering policy the ordersize is equal to one and the time interval between any two consecutive ordersforms a common fixed cycle. Thus, the supplier faces a deterministic demand andadopts a deterministic inventory policy. At each cycle he orders a batch of sizeN to his own supplier. Upon receipt of each batch he sends 1 unit of theproduct to each retailer with a transportation cost. In this paper, for theabove system we... 

    Revenue sharing contract for a VMI with one for one period policy

    , Article Cogent Engineering ; Volume 5, Issue 1 , 2018 , Pages 1-19 ; 23311916 (ISSN) Haji, A ; Afzalabadi, M ; Haji, R ; Sharif University of Technology
    Cogent OA  2018
    Abstract
    In this article, we design a revenue-sharing contract to coordinate inventory control decisions in a serial supply chain consisting of one supplier, one vendor, and one retailer. We assume that the retailer faces Poisson demand and his unsatisfied demands will be lost. The retailer applies one-for-one period policy in which he constantly places an order for one unit of product to the vendor in a predetermined time interval which results in a deterministic demand for the vendor. Vendor orders the required quantity from supplier which will be immediately received at the vendor’s warehouse. Solution procedures are developed to find the equilibrium in the vendor managed inventory program with a... 

    Pricing and inventory decisions in a vendor managed inventory system with revenue sharing contract

    , Article Uncertain Supply Chain Management ; Volume 6, Issue 3 , 2018 , Pages 299-320 ; 22916822 (ISSN) Haji, A ; Afzalabadi, M ; Haji, R ; Sharif University of Technology
    Growing Science  2018
    Abstract
    In this paper, we design a revenue sharing contract to coordinate pricing and inventory control decisions in a serial supply chain consisting of one supplier, one manufacturer and one retailer. We assume that the retailer faces Poisson demand and his unsatisfied demands will be lost. The retailer applies one-for-one period policy in which he constantly places an order for one unit of product to the manufacturer in a predetermined time interval which results in a deterministic demand for the manufacturer. Solution procedures are developed to find the equilibrium in the Vendor Managed Inventory (VMI) program with a revenue sharing contract, in which no party is willing to deviate from for the... 

    Developing a partial backlogging deteriorating inventory model with selling price dependant demand rate and cycle length dependant selling price

    , Article 2008 IEEE International Conference on Industrial Engineering and Engineering Management, IEEM 2008, Singapore, 8 December 2008 through 11 December 2008 ; January , 2008 , Pages 198-202 ; 9781424426300 (ISBN) Haji, A ; Sabahno, H ; Haji, R ; Sharif University of Technology
    2008
    Abstract
    In this paper, we develop an inventory model with price dependant demand rate, under time value of money and inflation, finite time horizon, exponential backlogging rate and exponential deterioration rate with the objective of maximizing the present worth of the total system profit. Using a dynamic programming based solution algorithm, we are able to find the optimal sequence of the cycles and also to obtain different optimal selling prices and optimal order quantities for the cycles with unequal lengths, which have never been done before for our model. We also use a proper numerical example to show accuracy of the solution procedure. © 2008 IEEE  

    One-for-one period policy and a series of suppliers

    , Article 2009 International Conference on Computers and Industrial Engineering, CIE 2009, 6 July 2009 through 9 July 2009, Troyes ; 2009 , Pages 902-906 ; 9781424441365 (ISBN) Haji, R ; Pirayesh Neghab, M ; Haji, A ; Sharif University of Technology
    2009
    Abstract
    The purpose of this paper is to adopt and analyze a new ordering policycalled one-for-one-period policy in a multi-echelon supply chain consisting ofone retailer and a series of TV suppliers. The main advantage of adopting theone-for-one-period (7,7) ordering policy for retailers is the elimination ofuncertainty for supplier which leads to total elimination of the safety stocksat all suppliers. This in turn leads to the reduction of the total system costsand in case any supplier's ordering cost is negligible it can even eliminate theneed for him to carry any inventory. In addition to this advantage, thenumerical results show that the application of this new policy for the retailerleads to... 

    Optimal batch production with minimum rework cycles and constraint on accumulated defective units

    , Article 2009 IEEE/INFORMS International Conference on Service Operations, Logistics and Informatics, SOLI 2009, Chicago, IL, 22 July 2009 through 24 July 2009 ; 2009 , Pages 633-638 ; 9781424435418 (ISBN) Haji, B ; Haji, A. R ; Haji, R ; Sharif University of Technology
    2009
    Abstract
    This paper deals with the issue of economic batch quantity (EBQ) in a single machine system in which defective items are produced in each cycle of production. The accumulated defective items produced in a period, consisting of several equal cycles, are all reworked in the last cycle of this period called the rework cycle. At the end of each period the whole process will start all over again. We assume that there is a limitation on the total defective items. We also do not adopt the restriction that the rework process rate be equal to the normal production rate. In addition we assume that there is a set up time for rework process. Further we assume that the number of rework cycles be as small... 

    Economic production quantity with accumulated rework

    , Article 36th International Conference on Computers and Industrial Engineering, ICC and IE 2006, Taipei, 20 June 2006 through 23 June 2006 ; 2006 , Pages 4196-4203 Haji, R ; Tavakol, A. R ; Haji, B ; Sharif University of Technology
    2006
    Abstract
    This paper deals with the issue of economic batch quantity (EBQ) in a single machine system in which defective items are produced in each cycle of production. The defective items produced in the first N cycles are accumulated at the end of the Nth cycle and are all reworked in a separate cycle called the rework cycle which has the same length as the other cycles and begins just at the end of the Nth cycle. At the end of the rework cycle the whole process will start all over again. For this system, assuming no shortages are permitted we obtain the economic batch quantity which minimizes the total cost  

    Multi-Echelon Mixed-loop Supply Chain Network Design under Disruption Conditions

    , M.Sc. Thesis Sharif University of Technology Beheshti, Saeed (Author) ; Haji, Rasoul (Supervisor) ; Haji, Alireza (Supervisor)
    Abstract
    Fulfilling the demands of customers, used to be the main purpose of Supply Chain Network Designers. Soon after that, the environmental concerns created the concept of Reverse Logistic in order to prevent goods from being scattered in the environment after their disposal. Governmental regulations and people's concerns, forced the factories to gather the created pollutions of the environment. They gradualy confessed the positive impacts of these ruturns on their financials. The flow of forward and reverse logistics establishes a Closed-Loop in which the returning economical circumstances were transferd into original factories. Later, Open-Loops were created. In open-loops the returns have to... 

    Designing a Vehicle Counting and Classification System

    , M.Sc. Thesis Sharif University of Technology Mousavi, Zeinab (Author) ; Gholampour, Iman (Supervisor)
    Abstract
    In recent years, Intelligent Transportation Systems (ITS) have received special attentions both in research and in commercial areas. Increased infrastructure facilities, like surveillance cameras, has made this concept even more attainable than before. In this respect, the ability to automatically extract information from traffic images, as one of the key inputs of ITSs, is of great importance. With an increased number of surveillance cameras and the need for more accurate information regarding the road users and their interactions, in order to better city traffic management, building and repairing roads, trip time estimation, number of people per roads estimation and etc, using human... 

    Economic Model Predictive Control with Time Varying Constraints

    , M.Sc. Thesis Sharif University of Technology Iman, Sara (Author) ; Haeri, Mohammad (Supervisor)
    Abstract
    In today's world we are dealing with many devices and processes with the goal of efficiency and performance improvement. In many processes particularly chemical ones, the goal is to control the output according to its constraints in the way that the performance is economically efficient, such as reducing energy consumption and energy loss and increasing efficiency. In order to control a process with economical goals, an economical cost function is used and after determination of optimal values a controller is used to guide the process so can achieve them. Model predictive control (MPC) is very common in this economic control Due to advantages such as considering the problem constraints. In... 

    Blind Universal Steganalysis in Multiple Actor Paradigms and its Relation to Pixel-Cost

    , M.Sc. Thesis Sharif University of Technology Akhondi, Ali (Author) ; Gholampour, Iman (Supervisor)
    Abstract
    Steganography is method for communicating confidential information through a non-trustworth in way which hides the existence of communication. For improving the security of steganography statistical detectability must decrease as such as possible. Despite the fact, that the quality of the relation between statistical detectability and amount of distortion engendered by embedding is still an open problem, problem of detectability reduces to problem of management of pixel embedding in order to minimization of distortion. As in wet paper coding methods, an optimum (or approximately optimum) algorithm proportioned to Pixel-cost has been offered, the current problem of steganography is to find... 

    Embedded Camera Design for Machine Vision Traffic Aplication

    , M.Sc. Thesis Sharif University of Technology Dowlatzadeh, Shayan (Author) ; Gholampour, Iman (Supervisor)
    Abstract
    With the advent of technology, small in size sensors, memory, speeding up the processor and lowering the cost, it is possible to build an embedded camera system. The goal of this project is to design and build an embedded camera system so it can execute any set of necessary algorithms as depending on the application. In this project, two models of embedded camera systems have been presented as an integrated system and a system with independent units. To design the integrated embedded system, ZYNQ processor is used and two structures are presented in the form of hardware-software and hardware design. In hardware-software design, image processing operations are done by software and in hardware... 

    Activity Analysis Based on Mobile Sensors

    , M.Sc. Thesis Sharif University of Technology Bagheri, Vahid (Author) ; Gholampour, Iman (Supervisor)
    Abstract
    Smartphone sensors like accelerometer, gyroscope and magnetometer are very common nowadays. This gives us the opportunity for sensor-based activity recognition. This thesis's goal is to collect data from different smartphone sensors and then extract hand-crafted features and classify them using machine learning algorithms. Metro, bus, taxi, bicycle, running, upstairs, walking and standing are studied activities in this thesis. All above steps are covered in this research, later we want to present an activity recognition model and then test it through a web server, after that, we modify the model by proposing to change learning coefficient to gain better accuracy. Finally, an Android app was... 

    Design and Development of Indoor Tracking and Navigation IoT Systems

    , M.Sc. Thesis Sharif University of Technology Roohi, Shahryar (Author) ; Gholampour, Iman (Supervisor)
    Abstract
    Current Global Positioning Systems (GPS) are unreliable for indoor positioning, leading to an increased demand for indoor navigation and tracking services. This research utilizes wireless technologies such as Bluetooth and Wi-Fi to provide these services by installing devices in the environment that connect to objects or individuals. To ensure the system's practicality, attention must be given to hardware optimization, cost reduction, and easy installation. The system should be applicable in large indoor environments such as hospitals and buildings, assisting with navigation. Key challenges include positioning accuracy, implementation costs, and energy consumption. This thesis presents... 

    Investigating How Network Effect, Affect the Success of Platform Complements in the Video Game Industry

    , M.Sc. Thesis Sharif University of Technology Jadidzadeh, Elahe (Author) ; Miremadi, Iman (Supervisor)
    Abstract
    This research examines the impact of indirect network effects in platforms on the likelihood of success for platform complements. The main question addressed by this study is: How does a larger number of complements in a platform ecosystem, through access to diverse resources and knowledge, influence the enhancement of innovation and the likelihood of success for platform complements? While the expansion of indirect networks creates more opportunities for innovation and access to resources on one hand, it may also lead to negative effects such as increased competition among complements and user confusion on the other. The goal of this research is to provide a comprehensive answer to these... 

    Examining the Effect of Patent Registration on the Attraction of Venture Capital: the Moderating Role of Collaborative Patents In the Field of Artificial Intelligence

    , M.Sc. Thesis Sharif University of Technology Khademi, Milad (Author) ; Miremadi, Iman (Supervisor)
    Abstract
    Artificial intelligence is a field that has made another revolution in the Fourth Industrial Revolution and has become one of the most widely used emerging technologies in the present era. Further investigation of the trends in this field shows that it has shown increasing growth in recent years. Also, in the future, this trend will continue and fundamental changes will occur in societies. For this reason, countries must definitely pay the necessary and sufficient attention to this field in their growth and development path. To achieve this growth path, it is intended to evaluate the status of leading countries in the field of artificial intelligence using two key variables in technological...