Sharif Digital Repository

Current transformers (CTs) are the most common current sensors in power system and use with measuring instruments and protective relays. Saturation of the protective CT threatens the proper operation of relays, while, the ratio error in a measuring CT directly reduces the accuracy of power system state estimation. In this dissertation, firstly, a test device has been introduced to identify the parameters of CT low-frequency model. Afterward, a digital compensator has been proposed to suppress the adverse effect of CT saturation. This compensator is capable to reproduce both the saturated inrush current and fault current that distinguishes it from other proposed methods. In addition, this... 

In recent years, requirement engineering and goal modeling have gained more attention among different organisations. Therefore, different methods have been designed to discover stakeholders’ requirements and translate them into process and organizational goals. Various goal models have been introduced to represent these goals and their relations towards each other. Still, these methods are manual representations of different process scenarios and do not relate to the actual behavior. In 2014, Map Miner Method (MMM) was introduced to discover intentional process models from event logs. MMM uses Hidden Markov Model (HMM) as a means to represent the process as a map model of strategies and... 

Recommending routes to city taxis in order to improve their performance in finding passengers can reduce traffic, pollution and waiting time for passengers, as well as this, increasing the efficiency of taxis can increase their income. In this study, by analyzing trajectory data obtained from 536 taxis in San Francisco over a period of one month, we generated networks of cells, each of which has time-dependent characteristics such as the probability of finding a passenger, the capacity of each cell, or the amount of demand exists is in the cell and the average speed of passing through that cell. also, the connections between these cells in order to make more use of the experiences of taxi... 

The purpose of the present study is to develop neural network estimation method for hybrid or panel data which have a combination of two cross-sectional and time series structures and because of the features of both structures, their use in different sciences offers many advantages; and the analytical methods for this data structure are also different from other one-dimensional structures, so different and specific regression models are presented for this data structure. However, in the artificial neural network method, modeling the development for this data structure is neglected, so in the present study, using the concepts of panel regression methods and their application to the... 

Present research focuses on providing a reasonable solution for separation control through arrays of discrete wall jets. In this thesis, quasi-radial wall jet actuators have been introduced and theirs application in separation control (boundary layer control) have been investigated for the first time. This study includes two phases. The first phase is dedicated to investigation of physics and functional nature of wall jet actuators. In this phase, using numerical simulations, wall jet actuators in different situations have been studied and it was shown that arrays of quasi-radial jets have better performance than arrays of three-dimensional jets in creating a combine two-dimensional wall... 

Increasing the kinetic energy of the near-wall fluid by exciting shear layers is known as an effective method for flow separation control. So far, choosing the proper approach to apply excitations has been a challenging issue in the field of flow control. This work investigates flow control of airfoils in static stall and flutter conditions, employing shear layer excitation technique and plasma actuators. This research introduces a novel flow separation control, namely dual-point excitation of shear layers and compares its performance with the conventional single-point excitation method. Two airfoils (NACA 4415 and NACA 0015) have been considered as the baseline test-cases. In the first part... 

Epilepsy is one of the diseases that affects the quality of life of epileptic patients. Epileptic patients lose control during epileptic seizures and are more likely to face problems. Designing and creating a seizure detection system can reduce casualties from epileptic attacks. In this study, we present an automatic method that reduces the artifact from the raw signals, and then classifies the seizure and non-seizure epochs. At all stages, it is assumed that no information is available about the patient and this detection is made only based on the information of other patients. The data from this study were recorded in Temple Hospital and the recording conditions were not controlled, so... 

Estimation of power transformer no-load loss is a critical issue in the design of distribution transformers. Any deviation in estimation of the core losses during the design stage can lead to a financial penalty for the transformer manufacturer. In this project an effective method is proposed to determine all components of the iron core losses applying a combination of the empirical and numerical techniques. In this method at the first stage all computable components of the core losses are calculated, using Finite Element Method (FEM) for modeling and analysis of the transformer iron core magnetic problem. This method takes into account magnetic sheets anisotropy, joint losses and... 

One of the shortcomings of differential logic in power transformers is its inability to detect small percentage faults at the end of the winding. The occurrence of a phase-to-ground short circuit in the last few percent of the winding near the neutral causes a very large fault current to pass through the neutral and the faulted coils, while the changes in the current observed at the transformer terminal will be very small. To improve the performance of the power transformer protection system, a restricted earth fault (REF) protection is normally used in parallel with the differential protection. To implement REF protection, several solutions have been proposed in scientific and industrial... 

Distribution companies typically use ADMD and coincidence factors to calculate aggregated loads. However, these factors have a significant impact on the selection of the optimal capacity of distribution network equipment; But so far, comprehensive studies at the level of single customers have not been implemented on the calculation of these factors. In this work, a comprehensive study has been conducted on residential customers in Tehran and the consumption data of 2121 residential customers, which were recorded during the summer of 2020, are used. The data were collected in two separate sets to investigate the effect of two factors: the type of cooling load and the welfare level of... 

Time perception is a concept that describes how a person interprets the duration of an event. Depending on the circumstances, people may feel that time passes quickly or slowly. So far, the understanding, comparison, and estimation of the time interval have been described using a simple model, a pacemaker accumulator, that is powerful in explaining behavioral and biological data. Also, the role of the frequency band, Contingent Negative Variation (CNV), and Event-Related Potential (ERP) components have been investigated in the passage of time and the perception of time duration. Still, the stimuli used in these studies were not melodic. Predicting is one of the main behaviors of the brain.... 

Attention is one of the important aspects of brain cognitive activities, which has been widely discussed in psychology and neuroscience and is one of the main fields of research in the education field. The human sense of hearing is very complex, impactful and crucial in many processes such as learning. Human body always does several tasks and uses different senses simultaneously. For example, a student who listens to his/her teacher in the class, at the same time pays attention to the teacher, looks at a text or image, and sometimes writes a note.Using the electroencephalogram (EEG) signal for attention assessment and other cognitive activities is considered because of its facile recording,... 

The brain electrical signal (EEG) has been widely used in clinical and academic research, due to its ease of recording, non-invasiveness and precision. One of the applications can be emotion recognition from the brain's electrical signal. Generally, two types of parameters (Valence and Arousal) are used to determine the type of emotion, which, in turn, indicate "positive or negative" and "level of extroversion or excitement" for a specific emotion. The significance of emotion is determined by the effects of this phenomenon on daily tasks, especially in cases where the person is confronted with activities that require careful attention and concentration.In the emotion recognition problem,... 

The synchronous generator is one of the main components of the power system, which plays a very important role in its stability. The angular stability of the synchronous generator is related to the balance between the input mechanical power and the output active power. Faults in the power system, generator switching, load switching, transmission line switching, generator input mechanical power interruption and generator excitation circuit fault cause the generator rotor angle to swing. The stability or instability of the generator depends on the intensity of the disturbance. The out-of-step function is responsible for detecting the instability of the generator. Impedance-based methods are...