Loading...
Search for:
hajizadeh--sadegh
0.198 seconds
Observer-Based Output Feedback Linearization Control with Application to HIV Dynamics
, Article Industrial and Engineering Chemistry Research ; Volume 54, Issue 10 , January , 2015 , Pages 2697-2708 ; 08885885 (ISSN) ; Shahrokhi, M ; Sharif University of Technology
American Chemical Society
2015
Abstract
This paper presents the feedback linearization control of HIV infection. A multi-input multi-output (MIMO) dynamic nonlinear HIV infection model for this purpose has been used. For this purpose, three widely used drugs are considered. A Luenberger-like nonlinear observer (LNO) is designed for estimation of unavailable states. To minimize the side effects of drugs, the concentration of ZDV which has the highest side effect is fixed to a minimum value and the external controllers parameters are obtained by maximizing an objective function. In the control design, limitations on drug consumption and unavailability of all states are taken into account. The closed-loop stability has been...
Effecive & efficient DSM configuration guidelines for low-cost development of complex systems
, Article Gain Competitive Advantage by Managing Complexity - Proceedings of the 14th International Dependency and Structure Modelling Conference, DSM 2012, 13 September 2012 through 14 September 2012 ; 2012 , Pages 125-137 ; 9783446433540 (ISBN) ; Sharif University of Technology
Institution of Engineering Designers
2012
Abstract
With the proliferation of more complex systems has come the need to find better solutions in both technical and management domains. Such complex systems are usually larger in size, have more parallel operations and contain more complex interfaces (Eisner, 2005). The Design Structure Matrix is a very useful tool in handling such complexities, provided that the system designer can use it properly. This paper addresses how effectiveness & efficiency are defined for a DSM and how these two important characteristics can be achieved. The importance of understanding the solution space in constructing an effective & efficient DSM is discussed and general guidelines are given on configuring the DSM...
Dynamic Simulation of HIV Infection and Its Control
,
M.Sc. Thesis
Sharif University of Technology
;
Shahrokhi, Mohammad
(Supervisor)
Abstract
This project presents appropriate strategies for HIV infection treatment. In order to close the presented strategy to real treatment regimen, appropriate parameters are selected for the HIV infection model, real outputs are considered for the system, and three widely used drugs (one PI: ritonavir (RDV), two RTIs: lamivudine (3TC) and zidovudine (ZDV)) are used to design a drug regimen. A Luenberger-like nonlinear observer (LNO) is also designed for estimation of unmeasurable states. In order to minimize the side effects of drug regimen, the concentration of ZDV is fixed at a minimum value at all time because this drug has a greater side effects than other drugs and the parameters of...
Thin Film Thickness Measurement Using Colors of Interference Fringes
, M.Sc. Thesis Sharif University of Technology ; Amjadi, Ahmad (Supervisor)
Abstract
There are several methods for measuring thin film thickness, however, for the analysis of liquid film motors [1] we need a method which is capable of measuring the thickness using a single image of the film. In this work, we use the colors that appear on thin films, such as soup bubbles, which is a result of light interference to calculate the thickness of the layer
Measure for Macroscopic Quantumness via Quantum Coherence and Macroscopic Distinction
, M.Sc. Thesis Sharif University of Technology ; Raeisi, Sadegh (Supervisor)
Abstract
One of the most elusive problems in quantum mechanics is the transition between classical and quantum physics. This problem can be traced back to the Schrodinger's cat. A key element that lies at the center of this problem is the lack of a clear understanding and characterization of macroscopic quantum states. Our understanding of Macroscopic Quantumness relies on states such as the Greenberger-Horne-Zeilinger(GHZ) or the NOON state. Here we take a first principle approach to this problem. We start from coherence as the key quantity that captures the notion of quantumness and demand the quantumness to be collective and macroscopic. To this end, we introduce macroscopic coherence which is the...
Structural Health Monitoring using Bayesian Optimization of the finite element model of structures and Kalman filter
, M.Sc. Thesis Sharif University of Technology ; Bakhshi, Ali (Supervisor)
Abstract
With confidence in the recorded observations, the RLS method no longer estimates the recorded measurements by sensors, i.e. the displacement and speed of the floors, and only estimates the parameters. In contrast, in the EKF method, in addition to estimating the structure's parameters, a more precise estimation of the observations recorded by the sensors has been done by accepting the noise in the recorded observations. These methods, which are based on the Bayesian updating, investigate the two primary sources of uncertainty in a problem: a) measurement noise or observation noise, and b) process noise, which includes modeling errors. In these methodologies, the unknown system parameters,...
Quad-Tree decomposition method for areal upscaling of heterogeneous reservoirs: Application to arbitrary shaped reservoirs
, Article Fuel ; Volume 139 , 2014 , Pages 659-670 ; 00162361 (ISSN) ; Jamshidi, S ; Hajizadeh, A ; Sharif University of Technology
2014
Abstract
In this paper, Quad-Tree decomposition method is applied for areal upscaling of irregular shaped petroleum reservoirs. Quad-Tree decomposition is a recursive data structuring technique which generates an upscaled model with non-uniform (unstructured) gridblocks. This type of coarsening reduces the number of gridblocks, but preserves the main heterogeneity features of the original fine model. Because of the quadruplet nature of the Quad-Tree decomposition, this method cannot be used for upscaling of irregular-shaped models, directly. In this study, by circumscribing a square to the irregular-shaped reservoirs, a temporary model is obtained which can be upscaled by Quad-Tree decomposition....
Evaluation of planing craft maneuverability using mathematical modelling
, Article Brodogradnja ; Volume 67, Issue 1 , 2016 , Pages 85-100 ; 0007215X (ISSN) ; Seif, M.S ; Mehdigholi, H ; Sharif University of Technology
Brodarski Institute
2016
Abstract
Ship transportation is increasing globally as is the risk of collision especially in congested areas. Numerical modeling method is a major simulation method to predict ship maneuverability. Ship maneuvering in calm water is an important topic to avoid collisions and leads to safe navigation. Therefore, reliable ship maneuvering simulations are required for incident analysis and prevention. In recent time within the research community orientated towards ship hydrodynamics an increasing attention has been paid to simultaneous solution of the planing ship maneuvering problem. The maneuverability of planing craft has been the subject of many research projects during the last few decades. To...
Enhanced Superhydrophobic and Photocatalytic Characteristics of Tio2 Hybrid Nanocoating for Self-cleaning Applications
, M.Sc. Thesis Sharif University of Technology ; Mohammadi, Mohammad Reza (Supervisor)
Abstract
Many researches have been made on super hydrophobic and photocatalyst nano coatings in the last decades as a solution to some environmental issues. Among all semiconductors chosen for this property, titanium dioxide is often used because of it's low cost, ease of accessibility and stability in different chemical circumstances to break up organic pollutions. Mixing this property of TiO2 with hydrophobic manner of SiO2 causes a superhydrophobe & photocatalyst nano coating. Doping TiO2 with another semiconductor may also improve photocatalytic behavior of coating by increasing surface area of reaction or decreasing the band-gap.In this research TiO2-SiO2 hybrid nano coating is made via...
Separation and Purification of Conjugated Linoleic Acid Isomers from Vegetable Oils
, M.Sc. Thesis Sharif University of Technology ; Alemzadeh, Iran (Supervisor)
Abstract
Conjugated linoleic acid (CLA), a mixture of positional and geometrical isomers of linoleic acid with conjugated double bonds, has gained considerable attention because of its anticarcinogenic and obesity treatment properties. The most biologically active CLA isomers are 9c, 11t-18:2 and 10t, 12c-18:2. The aim of this study is to separate and purify the two essential isomers via enzymatic method by Candida rugosa lipase and chemical method by urea crystallization and also optimization of reaction conditions in order to better separation. For enzymatic purification, L-menthol and Lauryl alcohol were used separately. Optimization of reaction conditions by enzyme content, time and the ratio of...
Finding Semi-Optimal Measurements for Entanglement Detection Using Autoencoder Neural Networks
, M.Sc. Thesis Sharif University of Technology ; Raeisi, Sadegh (Supervisor)
Abstract
Entanglement is one of the key resources of quantum information science which makes identification of entangled states essential to a wide range of quantum technologies and phenomena.This problem is however both computationally and experimentally challenging.Here we use autoencoder neural networks to find semi-optimal measurements for detection of entangled states. We show that it is possible to find high-performance entanglement detectors with as few as three measurements. Also, with the complete information of the state, we develop a neural network that can identify all two-qubits entangled states almost perfectly.This result paves the way for automatic development of efficient...
Numerical Analysis and Optimization of A Vortex Tube with Differential Evolution Algorithm
, M.Sc. Thesis Sharif University of Technology ; Mazaheri, Karim (Supervisor)
Abstract
The vortex tube is a simple device that injects compressed gas (air) tangentially into the vortex chamber through one or more injection nozzles. After entering, the flow becomes rotational and an axial cold flow goes towards the cold outlet and a peripheral hot flow goes towards the hot outlet. Besides all the different applications of the vortex tube, the main application of this device is cooling. Here, the goal is to optimize the geometry and physical conditions to improve the performance, which is done by using a commercial software and numerical analysis of a vortex tube to understand the flow physics and optimization. In this research, we use experimental and numerical data for...
A multiple-point statistics algorithm for 3D pore space reconstruction from 2D images
, Article Advances in Water Resources ; Volume 34, Issue 10 , October , 2011 , Pages 1256-1267 ; 03091708 (ISSN) ; Safekordi, A ; Farhadpour, F. A ; Sharif University of Technology
2011
Abstract
Fluid flow behavior in a porous medium is a function of the geometry and topology of its pore space. The construction of a three dimensional pore space model of a porous medium is therefore an important first step in characterizing the medium and predicting its flow properties. A stochastic technique for reconstruction of the 3D pore structure of unstructured random porous media from a 2D thin section training image is presented. The proposed technique relies on successive 2D multiple point statistics simulations coupled to a multi-scale conditioning data extraction procedure. The Single Normal Equation Simulation Algorithm (SNESIM), originally developed as a tool for reproduction of...
Determination of ship maneuvering hydrodynamic coefficients using system identification technique based on free-running model test
, Article Scientia Iranica ; Volume 23, Issue 5 , 2016 , Pages 2154-2165 ; 10263098 (ISSN) ; Seif, M. S ; Mehdigholi, H ; Sharif University of Technology
Sharif University of Technology
2016
Abstract
In the recent years, different mathematical models have been suggested for maneuvering of displacement vessels that are capable of estimation of vessel maneuvers with acceptable precision. These mathematical models are based on determined hydrodynamic coefficients and their accuracy depends on the known coefficients used to solve the mathematical model. System identification methods are developed to calculate these coefficients utilizing input and output data obtained from different sources. In this research, a 4.36-m model of KRISO Container Ship (KCS) displacement vessel has been manufactured by fiberglass, and the maneuver turning tests have been carried by self-propulsion method. A...
Evaluation of planing craft maneuverability using mathematical modeling under the action of the rudder
, Article Scientia Iranica ; Volume 24, Issue 1 , 2017 , Pages 293-301 ; 10263098 (ISSN) ; Seif, M. S ; Mehdigholi, H ; Sharif University of Technology
Sharif University of Technology
2017
Abstract
In the recent years, different mathematical models have been suggested for maneuvering of displacement vessels, which are capable to estimate maneuvering of the vessel with acceptable precision. But, simulation of planing craft maneuverability through a mathematical model has not been developed yet. In this paper, a mathematical model is developed for maneuvering of the planing craft by including the rudder forces and moments. Different maneuvers, such as straight-line stability, course keeping, and turning circle, are executed through the mathematical model. Simulation results are validated with the published experimental results and it is shown that they are in good agreement. Finally, the...
Effect of Grain Refining, Cooling Rate and Modification on Shrinkage Porosities in A356 Aluminum Alloy
, M.Sc. Thesis Sharif University of Technology ; Varahram, Naser (Supervisor)
Abstract
In this study, the influence of eutectic modification, grain refining and cooling rate on amount of shrinkage porosity in aluminium A356 alloy were investigated. Modification process for changing the morphology of eutectic silicon from needle like to fibrous like, use in aluminium – silicon alloys. This process often leads to increasing porosity in melt and affect harmfully on mechanical properties. For studying shrinkage porosity, the melt degassed completely to minimizing amount of gas in the melt. For modification, strontium in Al-10Sr master alloy and sodium in NaF salt used and for grain refining Al-10Ti and Al-5Ti-1B master alloys used. To study the effect of cooling rate, three mold...
Capital Structure Impact on the Performance of Listed Companies in the Tehran Stock Exchange
, M.Sc. Thesis Sharif University of Technology ; Hajizadeh, Iman (Supervisor)
Abstract
This thesis analyses the relationship between performance and capital structure of listed companies in the Tehran stock exchange. For examining this relationship, we use trade-off theory. This theory states that using debt comes with some benefits and costs for the company. If this theory holds true, we expect that in a low debt capital structure, as a result of benefits of using debt surpasses the costs of it, the relationship between debt and performance should be positive and in a high debt capital structure, as a result of costs of using debt surpasses the benefits of it, using more debt should have negative relationship with performance. For examining this relationship, we first gather...
Natural convection from a confined horizontal cylinder: The optimum distance between the confining walls
, Article International Journal of Heat and Mass Transfer ; Volume 44, Issue 2 , 2001 , Pages 367-374 ; 00179310 (ISSN) ; Razi, Y. P ; Sharif University of Technology
2001
Abstract
The laminar natural convection from an isothermal horizontal cylinder confined between vertical walls, at low Rayleigh numbers, is investigated by theoretical, experimental and numerical methods. The height of the walls is kept constant, however, their distance is changed to study its effect on the rate of the heat transfer. Results are incorporated into a single equation which gives the Nusselt number as a function of the ratio of the wall distance to cylinder diameter, t/D, and the Rayleigh number. There is an optimum distance between the walls for which heat transfer is maximum. © 2000 Elsevier Science Ltd. All rights reserved
Content Based Community Extraction in Social Networks from Stream Data
, M.Sc. Thesis Sharif University of Technology ; Abolhassani, Hassan (Supervisor)
Abstract
Increasing in social communication via electronic ways has been made social network analysis of these communications more important each day. One of the most important aspects in social network analysis is community detection in such networks. There are many different ways to extract communities from social graph structure which in some of them the content of communication between actors has been noticed in community extraction algorithm. In this thesis after a short survey over advantages and disadvantages of existing methods for community detection, a new method for extracting communities from social networks has been suggested which in addition to streaming property of data it spot the...
Quantum Information Processing with NMR Spectroscopy
, M.Sc. Thesis Sharif University of Technology ; Raeisi, Sadegh (Supervisor)
Abstract
Quantum Information Processing (QIP) is one of the active areas of research in both theoretical and experimental physics. Any experimental technique that is used for a scalable implementation of QIP must satisfy DiVincenzo’s criteria [17]. Nuclear Magnetic Resonance (NMR) satisfies many of these conditions, but it is not scalable and cannot initialize the qubits to pure state [28]. NMR can be a great platform for studying the fundamentals of QIP. In this project, for a twoqubit system, we prepare pseudo pure states from the initial mixed states by using unitary operations and implement CNOT gates. According to the results of our experiments, we can apply all the gates with high fidelity....