Sharif Digital Repository

It is very common to use moment frame system in earthquake-prone areas in the two main directions of buildings. This system is very popular among architects due to the creation of unobstructed openings between the columns and the possibility of using openings in them.The column is one of the main components in the design of orthogonal moment frame systems and plays an important role in the performance of this system. The columns that are in the two main directions of the intersection of two moment frame systems, due to the existence of the 30-100 rule in seismic design regulations, must be able to withstand 100% of the design earthquake force in one direction and 30% of the same force in the... 

Previously, numerous studies were carried out on the shear walls and important information are available in various fields, including wall design with various sections, wall design in areas with high seismicity risk, issues related to the reinforcement of boundary element and etc. In the design codes of reinforced concrete structures in the field of seismic design, some criteria for reinforcement of boundary element in the walls were conducted, but these codes do not answer to designers to arrange the wall with or without eccentricity with respect to column or the effect of separation of wall from the column. Due to the fact that we have a powerful software such as ETABS, design of shear... 

Underwater Sensor Network (UWSN) is new branch of Wireless Sensor Network (WSN). UWSNs are considerably different from ground base or terrestrial sensor networks in many aspects. These new features bring many challenges to the network architecture or protocol design of UWSNs. This kind of sensor networks has been proposed to detection, monitoring, protecting the oceans as oceanographic data collector, pollution monitoring, offshore exploration, disaster prevention, assisted navigation and tactical surveillance applications. The different characteristics of UWSN and trade off between UWSN and WSN have been discussed in many researches. Here we aim to propose a new architecture for very large... 

Distillation is the most applied unit in the separation processess of the oil and gas industries. Because the distillation process requires energy in the form of the utilities, integration of heat pump systems in the distillation process as an application of these systems is considered in this research. A new and effective methodology of proper integrating of heat pump and distillation columns has been proposed by collecting thermodynamic and thermoeconomic tools. Then, this procedure has been applied on the ethane recovery and NGL fractionation units of 4 & 5 phases of the south pars field. The exergy analysis of the distillation columns is the first step of this methodology as the... 

Troposphere layer includes complex flows which their effects in acoustic sensors are indicated as acoustic wave noise.It is essential to analyze these complex flows to recognize how to reduce the noise. In this thesis we have perused and modeled the sound wave propagation in troposphere layer.Given data are some thermal and velocity profiles of atmospheric flowsthe assumptions are: 1- gravity waves are negligible, 2- air density depends only on altitude, 3- sound waves parabolic equation assumptions are applied. Our goal Is to find the sound pressure level originated from a sound source in troposphere layer.This thesis emphasizes on analysis, recognition and modeling of the problem. Main... 

One of the important questions in mathematics is generalized. In case of metric spaces, one of the questions is: Can we extend notions of Riemannian geometry to arbitrary metric spaces smoothly? Ricci curvature is one of the most important concepts in differential geometry. Ricci curvature is defined for the Riemannian manifold and has many applications in mathematics and physics like Einstein’s equation in relativity theory. There is a good notion for a metric space having “sectional curvature bounded below by K” or “sectional curvature bounded above by K”, due to Alexandrov. Can we define the concept of Ricci curvature in metric space? A motivation for this question comes from Gromov’s... 

Seismic design codes reduce loads by using response modification factor. Because of the reserved strength in structural elements and capacity of structure to dissipate energy, structures can be designed for lower seismic loads. This factor has modified over time. In this thesis, the effect of the reduction in behavior factor on the response of two kinds of reinforced concrete systems were evaluated. Moment resisting frames and dual systems with different heights and regularity in plan, heve been design according to the behavior factor which is recommended in the 3rd edition of the Iranian codes of practice for seismic resistance design of buildings (Standard No. 2800). Drift and... 

Generally, nowadays, machine learning methods are used in many different areas for their superiority over other methods of prediction. Although being a tough task, stock market prediction with machine learning approaches is being spread due to satisfying results published ever yday. Machine learning methods usually use varied kinds of data ,including structured data such as market data, technical indicators and some fundamental data as well as unstructured one entailing text and graph data in order to enhance their predictability capacity. In this thesis we aimed to find out more about the importance and the contribution of structured data in prediction and we tried to attain a framework... 

This thesis presents an inventory control system which is based on Meta-heuristic Algorithms.In this thesis we will optimize the input values of our tree-echelon inventory model (keeping costs,stock worth,reorder costs,...) with these Algorithms. The presented method is able to determine the optimal stock level, costs of system and number of shipments in the system. The method is basically a decision support system (DES) and it is able to provide the order scheduling parameters of goods at operational level. The aim of the current research is to demonstrate that a Meta-heuristic algorithmis capable of solving complex inventory problems and with future improvements it is able to achieve... 

Poincare conjecture is one of the rst eorts for classifying 3-manifolds that was stated in the begining of 20th century. Eorts for proving this conjecture continued for about 100 years and nally Perelman has solved it in 2003. He has used Ricci ow which has been invented by Richard Hamilton in the early 80's. In this thesis rst we will introduce Ricci ow and will state the results before Perelman such as short time and long time existence of solution. Then we will mention some applications of Ricci ow and will state an explanation of the proof of uniformization and Calabi conjecture by Ricci ow. After that we start the main part of the thesis. In this part we will montion one of the... 

Nowadays best using of fossil fuels sources of the country (and) importance of comparison against lack of capacity in petrol production make determined the programmers and the directors to foresee and design expanded programs of the goals, to use natural gas for car fuels. To reach fulfillment of these programs, the confirmed needs of the natural gas cylinders are improved and make it essential to invest on producing compressive natural gas cylinders. In this way economical and technical change researches has been done in order to construct on department to produce 200,000 compressive natural gas cylinders in a year during two sets.(shifts) According to the results of technical researches... 

Different molybdenum oxide nano/micro structure thin films were synthesized by thermal evaporation method under various growth conditions such as deposition time, temperature and evaporation source-substrate distance. Molybdenum oxide nanostructures grown on Si(100) such as nanowalls, nanostars and nanowires were characterized with scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), x-ray diffraction (XRD), atomic force microscopy (AFM) and high resolution transmission electron microscopy (HRTEM). Shape and type of nanostructures were determined with SEM, AFM and HRTEM analysis. XPS analysis showed that the synthesized nanostructures contained Mo6+, Mo5+, Mo4+ and... 

One of the most important parts of a cement factory is the cement rotary kiln which plays a key role in quality and quantity of produced cement. In this part, the physical exertion and bilateral movement of air and materials, together with chemical reactions take place. Thus, this system has immensely complex and nonlinear dynamic equations. These equations have not worked out yet. Only in exceptional case; however, a large number of the involved parameters were crossed out and an approximation model was presented instead. This issue caused many problems for designing a cement rotary kiln controller. In this thesis, we employed a nonlinear system identification method for identification,... 

Optomechanical systems have attracted considerable attention in the last decade. Such a raising prominence is mainly due to its capability in providing new insight into the quantum behavior of macroscopic objects and exploring the interface between quantum and classical mechanics. Alongside this fundamental quest, cavity optomechanics has many other benefits, ranging from very precise measurements on forces and positions to quantum information processing. In this thesis, we investigate quantum properties of such systems. Particularly, we study cooling of the mechanical resonator toward its ground state and the entanglement between this mechanical resonator and the cavity field. Cooling the... 

Performance of reinforced concrete frames is highly dependent on detailing of the joint connections between its members, such as beams and columns. To have a good structural behavior, joints must show ductile behavior and designed based on the philosophy of strong column-weak beam. In the case of sever lacking ductility, strength or even rigidity of the connections, or having a weak column-strong beam, in the existing structures, there is a need for seismic upgrading of the connection. There are several ways for seismic upgrading of this type of connections.In the last decade Fiber Reinforced Polymer (FRP) widely has been used to strengthening the reinforced concrete (RC) members. Most of... 

Hodge theory is a beautiful synthesis of geometry, topology, and anal- ysis, which has been developed in the setting of Riemannian manifolds. On the other hand, spaces of images, which are important in the math- ematical foundations of vision and pattern recognition, do not fit this framework. This motivates us to develop a version of Hodge theory on metric spaces with a probability measure. We believe that this constitutes a step towards understanding the geometry of vision. We extend the theory of the Laplacian on domains of Euclidean space or on a manifold and next to metric space. Finally we give a beautiful application in web researcher engin.
 

Behran Mehr Peyma (BMP) is an elevator equipment producer and trader in Iran which was established in 2004. At first they are producing some regular parts of elevator and then during these years they are trying to improve their work and expand their business till they have the 15% market share in elevator market in Tehran.In this thesis I am trying to use the SWOT and PETS methods to show the exact situation of BMP comparing to the whole market considering the competitors.During this reduction in the market I suggest to BMP to change some policies and use some of its strength to attract some new customers, changing their brand name and find a relation to contribute in some tenders and... 

Adiabatic logic families are a group of logic circuits which operate based on adiabatic principles to tremendously reduce power consumption. These families have basic difference with common logic families in transistor level structure and there signals are not quadrangular but trapezoidal. Also, in these systems the source lines and clock pulse are the same. Research on Adiabatic families needs theoretical information in reversible computing. So we will start this project with explaining fundamental information in this field. After that some of these logic families are introduced and three important and widely used of them (SCRL-RERL-2LAL) are chosen to simulate. In each of these families... 

According to key importance of bridges in transportation system vital routes, a need to study and survey of bridges against destructive factors exist. Among these, bridges with concrete deck are widely used. One of the most important factors in destruction of these bridges is steel reinforcements corrosion and destruction of bridge deck. So in order to reduce the aggregation of reinforcements in critical sections and performance improvement of deck beams, a reinforcing substance which is not only resistant against corrosion but benefits from high resistance and stiffness is implemented.In this research the case studied bridge is simulated by finite elements software in two cases; reinforced...