Sharif Digital Repository

Distillation is the most applied unit in the separation processess of the oil and gas industries. Because the distillation process requires energy in the form of the utilities, integration of heat pump systems in the distillation process as an application of these systems is considered in this research. A new and effective methodology of proper integrating of heat pump and distillation columns has been proposed by collecting thermodynamic and thermoeconomic tools. Then, this procedure has been applied on the ethane recovery and NGL fractionation units of 4 & 5 phases of the south pars field. The exergy analysis of the distillation columns is the first step of this methodology as the... 

It is very common to use moment frame system in earthquake-prone areas in the two main directions of buildings. This system is very popular among architects due to the creation of unobstructed openings between the columns and the possibility of using openings in them.The column is one of the main components in the design of orthogonal moment frame systems and plays an important role in the performance of this system. The columns that are in the two main directions of the intersection of two moment frame systems, due to the existence of the 30-100 rule in seismic design regulations, must be able to withstand 100% of the design earthquake force in one direction and 30% of the same force in the... 

Previously, numerous studies were carried out on the shear walls and important information are available in various fields, including wall design with various sections, wall design in areas with high seismicity risk, issues related to the reinforcement of boundary element and etc. In the design codes of reinforced concrete structures in the field of seismic design, some criteria for reinforcement of boundary element in the walls were conducted, but these codes do not answer to designers to arrange the wall with or without eccentricity with respect to column or the effect of separation of wall from the column. Due to the fact that we have a powerful software such as ETABS, design of shear... 

Underwater Sensor Network (UWSN) is new branch of Wireless Sensor Network (WSN). UWSNs are considerably different from ground base or terrestrial sensor networks in many aspects. These new features bring many challenges to the network architecture or protocol design of UWSNs. This kind of sensor networks has been proposed to detection, monitoring, protecting the oceans as oceanographic data collector, pollution monitoring, offshore exploration, disaster prevention, assisted navigation and tactical surveillance applications. The different characteristics of UWSN and trade off between UWSN and WSN have been discussed in many researches. Here we aim to propose a new architecture for very large... 

In recent years, requirement engineering and goal modeling have gained more attention among different organisations. Therefore, different methods have been designed to discover stakeholders’ requirements and translate them into process and organizational goals. Various goal models have been introduced to represent these goals and their relations towards each other. Still, these methods are manual representations of different process scenarios and do not relate to the actual behavior. In 2014, Map Miner Method (MMM) was introduced to discover intentional process models from event logs. MMM uses Hidden Markov Model (HMM) as a means to represent the process as a map model of strategies and... 

Recommending routes to city taxis in order to improve their performance in finding passengers can reduce traffic, pollution and waiting time for passengers, as well as this, increasing the efficiency of taxis can increase their income. In this study, by analyzing trajectory data obtained from 536 taxis in San Francisco over a period of one month, we generated networks of cells, each of which has time-dependent characteristics such as the probability of finding a passenger, the capacity of each cell, or the amount of demand exists is in the cell and the average speed of passing through that cell. also, the connections between these cells in order to make more use of the experiences of taxi... 

The purpose of the present study is to develop neural network estimation method for hybrid or panel data which have a combination of two cross-sectional and time series structures and because of the features of both structures, their use in different sciences offers many advantages; and the analytical methods for this data structure are also different from other one-dimensional structures, so different and specific regression models are presented for this data structure. However, in the artificial neural network method, modeling the development for this data structure is neglected, so in the present study, using the concepts of panel regression methods and their application to the... 

Troposphere layer includes complex flows which their effects in acoustic sensors are indicated as acoustic wave noise.It is essential to analyze these complex flows to recognize how to reduce the noise. In this thesis we have perused and modeled the sound wave propagation in troposphere layer.Given data are some thermal and velocity profiles of atmospheric flowsthe assumptions are: 1- gravity waves are negligible, 2- air density depends only on altitude, 3- sound waves parabolic equation assumptions are applied. Our goal Is to find the sound pressure level originated from a sound source in troposphere layer.This thesis emphasizes on analysis, recognition and modeling of the problem. Main... 

One of the utmost important factors during salvage operation of drowned ships is raising velocity. Uncontrolled raise is a dynamic phenomenon which can lead to the sudden tensions, collapse in airbags or ships. Studing this issue helps the engineers which kinds of problems are more important during salvage operations. This study focus on modeling and analysis of raising movment of the ship with FLOW-3D and ABAQUS software.
In FLOW-3D environment, hydrodynamic analysis of rising movment of drowned ship has been done. We should mention that applied forces and velocities and other parameters from the FLOW-3D output should be passed IMCA Criteria to avoid uncontrollable raise. In ABAQUS... 

Profile Monitoring is a new research topics in the field of statistical process control. In many applications of statistical quality control, sometimes quality of a process or product described by a relationship between a response variable and one or more independent variables.The researchers call this relationship profile. The study seeks to demonstrate that monitoring profiles In addition, the industry can be effective in medical field and improves control of the patient's condition by a doctor. Profiles are usually modeled with a linear regression equation, non-linear or polynomial. finally, the results of this study, using actual data, models and methods to predict and control... 

Two experimental models were designed and tested to extract energy from vortex induced vibrations of a elastically mounted one degree of freedom rigid cylinder in the Reynolds range of 120000 < Re <220000. In the first model the amplitude and frequency of the movement was measured then a second model was designed to be tested in the Emam Hossein marine laboratory. The model was designed in a way that many of its properties like mass ratio, spring constant and damping coefficient were able to be altered. In this study the vortex induced vibration of an elastically mounted cylinder was scrutinized in high Reynolds and very low mass ratios for the first time and an amplitude ratio of 2.49 were... 

As a method of cancer treatment or improvement of cancer-related complications, external radiation therapy is prescribed by physicians, in case of detection of a tumor in a region of patient’s body. Over time, various techniques have been developed for external beam radiation therapy. Among which, Intensity Modulated Radiation Therapy (IMRT), due to its ability to adjust the intensity of radiation beams, has a higher capacity to generate appropriate dose distribution based on tumor size and volume and it is one of the most widely used techniques in cancer treatment centers.The core process in treatment planning is using appropriate computer algorithms which results in posing enough damage to... 

The aim of Emergency Medical Services (EMS) is to provide fast medical care and to transport patients to hospitals at the earliest possible time, so as to reduce injury and fatality rate. Healthcare managers try to improve healthcare systems by reducing the response time to demands. In this thesis, we present mathematical models for the problem of location and relocation of emergency vehicles after the end of their service time or after they have returned to a hospital. We believe that implementing these models can help managers improve the performance of emergency medical services. In the first part of this study, we present a two-level deterministic optimization model considering demand... 

Supplier selection and order quantity allocation problem is one of the most complex making decision problems comes into account. In the past, supplier selection done based on criteria such as price, quality and delivery time. Today's supply chains with the aim of expanding business activities and improving their performances, Follow process such as outsourcing, product development, and selection of multi-supplier strategies. This conditions will bring opportunities and threats for supply chains. One of the possible risks to supply chains are disruption risks and disruption has been a great concern in the past decade and disruption of suppliers are one of the new topics that have recently... 

At the present, End-stage renal disease(ESRD) is the ninth-leading cause of death in the USA.according methods of medical treatment for End-stage renal disease (ESRD), transplantation is the most viable renal replacement therapy for ESRD patients, there is a disparity between the demand for kidneys for transplantion and the supply. Incompatible inblood-type and antigen matching between patient-donor pairs is cause of shortage in disparity between the demand and the supply.paired kidney exchange of kidney among incompatible patient-donor pairs.PKE can be solve many difficulties in matching patient with incompatible donors. Kidney transplant surgeries in PKE must take place simultaneously... 

Marine current power has been utilized in recent years as one of the most foreseeable renewable energy sources. In this study a multi-objective hydrofoil optimal design is carried out for use in marine current turbine in order to improve hydrodynamic performance due to low speed current in Qeshm channel. A particle swarm optimization code using FORTRAN is developed and coupled with XFoil software as flow solver that is based on panel method. B-spline curve is used to parameterize the hydrofoil shape and the coordinates values of the control points are designated to act as optimization parameters. Validity of flow solver examined by comparison made between computed data against experimental... 

Operating rooms have always been the most expensive and also the most profitable section in hospitals which include approximately one third of cost and two third of income. The management always wants to decrease the cost of hospitals. On the other hand, usually this goal stands against other goals such as patient’s satisfaction. So the manager should make a balance between these goals. In this research, we will propose an integer programming model for operating room scheduling problem without uncertainty for elective patients. In order to make the model more realistic, we want to make connection between operating room theatre and intensive care units. Also, we will consider desirable... 

Cancer is one of the main causes of death among all people around the world. This shows that more and more attention should be paid to cure cancer. One of the most common cancer treatments is radiation therapy. Among all radiation therapy treatments, Intensity-Modulated Radiation Therapy is a very effective and flexible ways to treat cancer. There are numerous mathematical problems to find the perfect treatment plan. One of these mathematical problems is Fluence Map Optimization in which we try to find the best dose intensity for each tumor and surrounding organs. The main purpose in this problem is to minimize the number of cancerous cells which are being destroyed while minimizing the... 

The growing requirements for renewable energy production lead to the development of a new series of systems, including wave and tidal energy conversion systems. Due to their sensitivity and the impact of the aggressive marine environment, the selection of the most adequate location for these systems is a major and very important task. Several factors, such as technological limitations, environmental conditions, administrative and logistic conditions, have to be taken into account in order to support the decision for best location. The aim of the present study is to provide an Atlas of IRAN Offshore Renewable Energy Resources (hereafter called ‘the Atlas’) to map out wave and tidal resources...