Sharif Digital Repository

In this contribution, reduced grapheme oxides (rGO) with immobilized tin oxide (SnO2) nanocatalysts were synthesized via the Incipient Wetness Impregnation (IWI) method. To characterize the SnO2/rGO composites, several analyses including the; XRD, Raman, FTIR, ICP-OES, BET-BJH, XPS, TEM, and TPD were utilized. Then the effects of parameters including reaction time, total metal loading, and the initial sulfur concentration of model fuel in the dibenzothiophene (DBT) oxidation desulfurization process were evaluated. After determining the optimal conditions for the aforementioned parameters, the influences of 3 effective factors of the molar ratio of oxidant/substrate (O/S), the molar ratio of... 

Electric arc furnaces are used to make steel from scrap iron in steel industry. Nowadays, the aim of more researches in this area is to increase yield of furnace and it's compatibility with environment. One of the methods to achieve these purposes is to control the off-gas system as relative pressure in furnace would be kept negative. Because the combustion gases inside the furnace must not leak into the plant environment. However for preventing of loss of energy, the amount of this negative number must be small. In this paper, new intelligent control method named fuzzy emotional control, applied to off- gas system to control the relative pressure in the furnace and its result is compared to... 

CoMo/reduced graphene oxide (rGO) catalyst was synthesized for the oxidative desulfurization process (ODS) of dibenzothiophene (DBT) in n-decane. Parameters including total metal (Co and Mo) loading, Co/Mo and CA (citric Acid)/Mo molar ratios were investigated toward achieving optimum conditions. The catalysts were characterized by the XRD, ICP, FTIR, Raman Spectroscopy, BET-BJH, NH3-TPD, XPS, and TEM methods. The product sulfur content was measured by the ICP-OES while the product was evaluated using FTIR and 1H NMR analyses. All experimental stages were designed using Design-Expert software. High BET area, acidity, uniform particle size, and Co-promoter played key roles in this... 

The XW/rGO compounds (XW = Co or Ni modified WO3) have has been utilized as catalysts in the oxidative desulfurization (ODS) process of a liquid model fuel containing dibenzothiophene (DBT). Various characterization methods were carried out to complete evaluations of the prepared catalysts. Moreover, using the GC–MS method, it became clear that the final product of the process was dibenzothiophene sulfone (DBTO2). Furthermore, results showed that under the optimized conditions (oxidant to substrate molar ratio = 6, 75 °C and catalyst to substrate molar ratio = 0.08), the DBT content of a model fuel was declined by 100% only within a reaction duration time of 45 min using the CoW (20)/rGO... 

In this contribution, CoW/X materials (X = CNT or CNF) were utilized as oxidative desulfurization (ODS) catalysts for the removal of dibenzothiophene (DBT) from a model fuel (n-decane), incorporating the H2O2 as an efficient oxidant. Different operating conditions were investigated. Both compounds revealed high desulfurization efficiency using milder operating conditions leading to low levels of the DBT compound since only 1 h while using a low ratio of H2O2/S = 6. Among synthesized compounds, the CoW (15)/CNT showed superior DBT conversion through the ODS process. In other words, the highest sulfur removal efficiency of 100% for a feed sulfur content of 500 ppm was determined in a 40-min... 

Learning a foreign language encompasses a process of trial and error that can lead to the progression of the learner's interlanguage, meaning that the learners make use of their language knowledge that receives feedback and brings about progress through diagnosis of the problems and being corrected by the teacher. Therefore, there exists a need to analyze the underlying reasons causing the students to remain taciturn with a low willingness to communicate (WTC) during a language class. There has been much work done investigating the role of the learner's stable personal characteristics (traits) along with their situational changes at a specific time (states) that influence the student's... 

Accurate system identification (SI) is essential for flight controller design of unmanned aerial vehicles and microaerial vehicles (MAVs). SI can be performed either in frequency or time domain using flight test data. As flight testing is often costly and may even lead to catastrophic events before some flight stability analysis is at hand, a low-cost 5 degree-of-freedom free motion platform (FMP) is designed and used for initial identification of MAVs via wind tunnel testing. A typical MAV is constructed as a test case and equipped with inertial sensors for testing and validation purposes. The proposed FMP allows for both rotational as well as translational motions that in turn provide for... 

Using 3-D scanned data to analyze and extract pore network plays a vital role in investigation of porous media's characteristics. In this paper, a new simple method is developed to detect pores and throats for analyzing the connectivity and permeability of the network. This automated method utilizes some of the common and well-known image processing functions which are widely accessible by researchers and this has led to an easy algorithm implementation. In this method, after polishing and quality control of images, using city-block distance function and watershed segmentation algorithm, pores and throats are detected and 3-D network is produced. This method can also be applied on 2-D images... 

In this paper, we try to recognize and distinguish different groups of arrhythmia using novel features which have been obtained from the heart rate's phase space in recent years. For this purpose, we used Triangular Phase Space Mapping (TPSM) and Parabolic Phase Space Mapping (PPSM). For recognition, we used three groups of 15 subjects using the Physionet database (Arrhythmia, Congestive Heart Failure (CHF), and Atrial Fibrillation (AF)) with Normal Sinus Rhythm (NSR). The obtained features discriminate arrhythmia from NSR by p